1st on the list, which puts it at an estimated 10–40% of the formula.
Silicon dioxide
LANEIGE
Neo Blurring Powder
face setting spray and powder
LANEIGE
face setting spray and powder
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testThe viral product you’ve been waiting for! Introducing Neo Blurring Powder for the ultimate natural finish. This ultra-fine, skincare-infused powder leaves skin looking soft, blurred, and semi-matte without feeling heavy or cakey.
Neo Blurring Powder is a cushioning setting spray and powder from LANEIGE, a brand based in Korea. The formula is built mainly around hydration. The ingredient list runs to 15 ingredients, each broken down in full below.
By its ingredient list the formula reads as moderately cushioned — emollient enough to feel like a cream, without the heaviest occlusives near the top. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Ethylhexylglycerin, Butylene Glycol and Hydrolyzed Hyaluronic Acid, humectants that pull water into the upper layers of skin rather than sealing it there.
Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Ethylhexylglycerin, Butylene Glycol, Hydrolyzed Hyaluronic Acid and Caprylic/capric Triglyceride.
Oil control: Moderate. Ingredients that moderate sebum or absorb shine, and here that comes from Silica and Hydrolyzed Corn Starch.
On richness alone it suits Balanced skin best, and is the least natural fit for Dry, Combination (dry), Combination (oily) and Oily skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on barrier support, antioxidant protection, cell renewal and firmness signalling. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it. 2 ingredients on the label have not been matched to our database yet, so the analysis above reads a slightly incomplete list.
Use it in the morning. In a routine it goes taken with food. Follow the dose on the pack and check interactions with anything you already take.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Regulates sebum production to reduce shine and greasiness
Calms redness, irritation, and inflammation for sensitive skin
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Fades hyperpigmentation and evens out dark spots over time
Brightens and balances complexion for a more uniform appearance
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 10–40% of the formula.
Silicon dioxide
2nd on the list, which puts it at an estimated 5–20% of the formula.
Decanoic acid, ester with 1,2,3-propanetriol octanoate; Glycerides, mixed decanoyl and octanoyl
4th on the list, which puts it at an estimated 2–10% of the formula.
Poly[oxy(methylsilylene)]
5th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
6th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octanoic acid, monoester with glycerol
7th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
9th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
.alpha.-d-Glucopyranosiduronic acid, (3.beta.,20.beta.)-20-carboxy-11-oxo-30-norolean-12-en-3-yl 2-O-.beta.-d-glucopyranuronosyl-, dipotassium salt
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Hyaluronic Acid is the hydrolysate of Hyaluronic Acid derived by acid, enzyme or other method of hydrolysis
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Syrups, hydrolysed starch. A complex combination obtained by the hydrolysis of cornstarch by the action of acids or enzymes. It consists primarily of d-glucose, maltose and maltodextrins
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Part of this label has not been matched to our ingredient database, so only what is present is listed — no absence is claimed.
Dimethicone/vinyl Dimethicone Crosspolymer, Methicone
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 15 ingredients on the label.
Sets the thickness, spread and stability of the formula
Draws water into the upper layers of skin
Neutralises free radicals from UV and pollution
Softens and smooths by filling gaps between skin cells
Botanical material, usually for antioxidants or scent
Dissolves and carries everything else
Changes how skin behaves rather than how it feels
Binds trace metals that would otherwise spoil the formula
Loosens or dissolves dead surface cells
Keeps the product free of microbial growth
Lifts oil and dirt, or holds oil and water together
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 10–40% of the formula.
Silicon dioxide
2nd on the list, which puts it at an estimated 5–20% of the formula.
Decanoic acid, ester with 1,2,3-propanetriol octanoate; Glycerides, mixed decanoyl and octanoyl
3rd on the list, which puts it at an estimated 5–20% of the formula.
Dimethicone/Vinyl Dimethicone Crosspolymer is a crosslinked dimethyl siloxane polymer (silicone elastomer) that is formed by the reaction between Hydrogen Dimethicone or Bis-Hydrogen Dimethicone, and Vinyl Dimethicone or Bis-Vinyldimethicone.
4th on the list, which puts it at an estimated 2–10% of the formula.
Poly[oxy(methylsilylene)]
5th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
6th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octanoic acid, monoester with glycerol
7th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
8th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Mentha Arvensis Leaf Extract is an extract of the leaves and twigs of the Horse Mint, Mentha arvensis L., Labiatae
9th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
.alpha.-d-Glucopyranosiduronic acid, (3.beta.,20.beta.)-20-carboxy-11-oxo-30-norolean-12-en-3-yl 2-O-.beta.-d-glucopyranuronosyl-, dipotassium salt
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Hyaluronic Acid is the hydrolysate of Hyaluronic Acid derived by acid, enzyme or other method of hydrolysis
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Syrups, hydrolysed starch. A complex combination obtained by the hydrolysis of cornstarch by the action of acids or enzymes. It consists primarily of d-glucose, maltose and maltodextrins
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Pinus Densiflora Leaf Extract is the extract of the leaves of the Pine, Pinus densiflora, Pinaceae
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Disodium dihydrogen ethylenediaminetetraacetate
These are printed on the label but have not been linked to an ingredient record yet, so they are excluded from the analysis above.
SILICA, CAPRYLIC/CAPRIC TRIGLYCERIDE, DIMETHICONE/VINYL DIMETHICONE CROSSPOLYMER, METHICONE, ETHYLHEXYLGLYCERIN, GLYCERYL CAPRYLATE, BUTYLENE GLYCOL, MENTHA ARVENSIS LEAF EXTRACT, DIPOTASSIUM GLYCYRRHIZATE, 1,2-HEXANEDIOL, HYDROLYZED HYALURONIC ACID, HYDROLYZED CORN STARCH, PINUS DENSIFLORA LEAF EXTRACT, TOCOPHEROL, DISODIUM EDTA.
HYDROLYZED HYALURONIC ACID.
Press the puff lightly and evenly over the silicone mesh to dispense powder. Work the powder into the puff by folding and rubbing the halves together. Gently press the puff onto skin, using a rolling motion to work the powder in.
Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry), Combination (oily), Oily skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
One ingredient could feed malassezia: Glyceryl Caprylate. That describes the yeast's food supply, not a prediction that it will cause a breakout.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
No — it contains Dimethicone/vinyl Dimethicone Crosspolymer, Methicone.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.
Use it in the morning, taken with food.
It lists 15 ingredients, of which 1 are recorded as actives.
LANEIGE, a brand based in Korea.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect