Missha

ALL AROUND SAFE BLOCK AQUA SUN GEL

face sunscreen

Added Last edited

Fit by skin type

General, ingredient-based — not your personalized match.

Dry
60%
Combination (dry)
60%
Balanced
90%
Combination (oily)
80%
Oily
80%

See how this fits your skin

Take the skin test and I'll show you how suitable this product is for you.

Take the skin test
39
Ingredients
5
Benefits
0
Actives
Find Dupes

At the last step of your routine evenly apply on the face, neck, arms, legs, and genlty pat into the skin

Key Insights

Benefits

5
Anti-Aging
Evens Skin Tone
Hydration
Oil Control
Soothing

Risks

4
Alcohol
Microplastic
Silicone
Synthetic polymer

About ALL AROUND SAFE BLOCK AQUA SUN GEL

Overview

ALL AROUND SAFE BLOCK AQUA SUN GEL is a lightweight sunscreen from Missha, a brand based in Korea. Its job is UV protection. The ingredient list runs to 37 ingredients, each broken down in full below.

Texture and finish

By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup.

UV filter system

It is a chemical (organic-filter) sunscreen, using Homosalate, Octisalate, Avobenzone, Tinosorb S, Amiloxate and Octocrylene. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. The formula contains a photounstable filter alongside a stabiliser, which is the standard and effective way to keep it from degrading in sunlight.

What the formula does

Hydration: Moderate. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Ethylhexylglycerin, Butylene Glycol, Centaurea Cyanus Flower Water and Water.

Who it suits

On richness alone it suits Balanced skin best, and is the least natural fit for Dry and Combination (dry) skin. A few ingredients carry irritation flags, so reactive skin should patch test before using it on the whole face.

What it does not target

The formula contributes little or nothing on barrier support, antioxidant protection, brightening and tone and soothing. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it. 2 ingredients on the label have not been matched to our database yet, so the analysis above reads a slightly incomplete list.

What is not in it

It does contain drying alcohol, worth knowing if your skin reacts to any of them.

Where it fits in a routine

Use it in the morning. In a routine it goes final morning step, before makeup. Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms. Reapply every two hours of sun exposure, and after swimming or towelling off. Let it set for a couple of minutes before makeup so it does not pill.

This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.

Pros and cons

Drawn purely from the ingredient list

Pros

  • Broad-spectrum coverage that reaches into UVA I

Things to know

  • Contains drying alcohol high in the list
  • Contains a solid synthetic polymer (microplastic)
  • Part of the label has not been matched to our ingredient database yet

Which skin types it suits

Scored on how rich or light the formula reads from its INCI order.

Suitable for

  • Balanced skin

May suit

  • Combination (oily) skin
  • Oily skin

Less suitable for

  • Dry skin
  • Combination (dry) skin

Sensitive skin

A few ingredients here carry irritation flags. Reactive skin should patch test on the jawline for a few days before using it on the whole face.

Skin concerns

Based on the curated benefits documented for this product's ingredients.

Helps with

  • Anti-Aging 7 ingredients

    Boosts collagen and cell turnover to reduce fine lines and wrinkles

  • Hydration 6 ingredients

    Attracts and locks in moisture to keep skin plump and dewy

  • Evens Skin Tone 1 ingredient

    Brightens and balances complexion for a more uniform appearance

  • Oil Control 1 ingredient

    Regulates sebum production to reduce shine and greasiness

  • Soothing 1 ingredient

    Calms redness, irritation, and inflammation for sensitive skin

Does not target

Anti-Acne Blackhead Reducing Dark Spot Fading Pore Minimizer Smooths Bumpy Skin

None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.

UV filters

Chemical (organic) filter system · broad-spectrum through UVA I

Homosalate

homosalate
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
First-generation UVB filter
Approved in
Approved worldwide — EU limit lowered to 7.34% in 2022
Maximum permitted level
Up to 7.34% (EU since 2022), 15% (US)

Another solvent-filter: modest UVB coverage, mostly there to carry other filters.

Octisalate

ethylhexyl salicylate
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
First-generation UVB filter
Approved in
Approved worldwide
Maximum permitted level
Up to 5% (EU, US)

A weak filter used mainly as a solvent — it dissolves the crystalline filters (avobenzone, oxybenzone) so they can be formulated at all.

Avobenzone

butyl methoxydibenzoylmethane
Protects from
UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
No — degrades in sunlight
Generation
Second-generation UVA filter
Approved in
Approved worldwide
Maximum permitted level
Up to 5% (EU), 3% (US)

The workhorse UVA filter, and the fragile one: it loses a large share of its protection within an hour of sun unless the formula pairs it with a stabiliser such as octocrylene or Tinosorb S.

Tinosorb S

bis-ethylhexyloxyphenol methoxyphenyl triazine
Protects from
UVB (290–320 nm), UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation broad-spectrum filter
Approved in
EU, UK, Korea, Japan, Australia — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

One of the most photostable filters in use, and it stabilises avobenzone and octinoxate alongside it. Oil-soluble, cosmetically light, no white cast.

Amiloxate

isoamyl p-methoxycinnamate
Protects from
UVB (290–320 nm)
Photostable
No — degrades in sunlight
Generation
First-generation UVB filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

Closely related to octinoxate, with the same photostability caveat.

Octocrylene

octocrylene
Protects from
UVB (290–320 nm), UVA II (320–340 nm)
Photostable
Yes — photostable
Generation
Second-generation UVB filter
Approved in
Approved worldwide
Maximum permitted level
Up to 10% (EU, US)

Mostly present to stabilise avobenzone rather than for its own modest UVB coverage. Degrades slowly into benzophenone over a product's shelf life.

Key ingredients

The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.

1st on the list, which puts it at an estimated 30–80% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration

2nd on the list. Regulation caps it at 7.34%, so it is present at roughly 3.67–7.34%.

Benzoic acid, 2-hydroxy-, 3,3,5-trimethylcyclohexyl ester

Anti-Aging

4th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.

2-Ethylhexyl salicylate

Anti-Aging

6th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.

1-[4-(1,1-Dimethylethyl)phenyl]-3-(4-methoxyphenyl)propane-1,3-dione

Anti-Aging

7th on the list, which puts it at an estimated 1–5% of the formula.

Silicon dioxide

Oil Control

11th on the list, which puts it at an estimated 1–3% of the formula.

2-Cyano-3,3-Diphenyl Acrylic Acid 2-Ethylhexyl Ester

Anti-Aging

14th on the list, which puts it at an estimated 1–3% of the formula.

Dimethicone

Hydration

17th on the list, which puts it at an estimated 1–3% of the formula.

Decanoic acid, ester with 1,2,3-propanetriol octanoate; Glycerides, mixed decanoyl and octanoyl

Hydration

18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Propanediol, 3-(2-ethylhexyloxy)

Hydration

24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration

Formula analysis

Each axis is scored from the ingredients present and how high up the list they sit.

Hydration Moderate

Ingredients that pull and hold water in the upper layers of skin

Barrier support None

Lipids and repair signals that support skin barrier integrity

Antioxidant support None

Ingredients that mop up free radicals from UV and pollution

Oil control Low

Ingredients that moderate sebum or absorb shine

Brightening None

Ingredients that act on uneven tone and post-inflammatory marks

Soothing None

Ingredients aimed at visible redness and reactivity

Cell renewal None

Retinoids, acids and enzymes that speed surface turnover

Firmness signalling None

Peptides and growth factors that signal for collagen support

Photostability High

A photounstable filter is present, paired with a stabiliser

Active and supporting ingredients

"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.

Supporting ingredients (31)

Solvents, emollients, texture agents and preservatives — the formula that carries the actives.

Water Alcohol Denat. Dipropylene Glycol Silica Methyl Methacrylate Crosspolymer Bis-peg/ppg-20/5 Peg/ppg-20/5 Dimethicone Methoxy Peg/ppg-25/4 Dimethicone Dimethicone Caprylyl Glycol Acrylates/c10-30 Alkyl Acrylate Crosspolymer Caprylic/capric Triglyceride Ethylhexylglycerin Sodium Hydroxide 1,2-hexanediol BHT Disodium Edta Limonia Acidissima Extract Butylene Glycol Vp/hexadecene Copolymer Cyclopentasiloxane Acrylates/dimethicone Copolymer Chrysanthemum Indicum Flower Extract Camellia Sinensis Leaf Extract Phenoxyethanol Morus Alba Fruit Extract Cinnamomum Cassia Bark Extract Artemisia Princeps Leaf Extract Diospyros Kaki Leaf Extract Pueraria Lobata Root Extract Centaurea Cyanus Flower Water Helichrysum Italicum Flower Water

What is and is not in it

Part of this label has not been matched to our ingredient database, so only what is present is listed — no absence is claimed.

Contains

  • Drying alcohol

    Alcohol Denat.

  • Silicones

    Bis-peg/ppg-20/5 Peg/ppg-20/5 Dimethicone, Methoxy Peg/ppg-25/4 Dimethicone, Dimethicone, Cyclopentasiloxane, Acrylates/dimethicone Copolymer

  • Microplastics

    Methyl Methacrylate Crosspolymer

What to layer it with

Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.

Compatible with

  • Vitamin C (L-ascorbic acid)
  • Retinoids (retinol, retinal)
  • AHAs (glycolic, lactic)
  • BHA (salicylic acid)
  • PHAs (gluconolactone)
  • Benzoyl peroxide
  • Azelaic acid
  • Copper peptides
  • Bakuchiol
  • Niacinamide
  • Hyaluronic acid
  • Ceramides
  • Signal peptides
  • Panthenol
  • Sunscreen

Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.

Where it fits in a routine

Morning
  1. Cleanse
  2. Toning
  3. Treat
  4. Moisturise
  5. Protect

This product is the "Protect" step.

  • Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms.
  • Reapply every two hours of sun exposure, and after swimming or towelling off.
  • Let it set for a couple of minutes before makeup so it does not pill.

Safety and suitability

Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.

Pregnancy and breastfeeding
Nothing in this formula is on the standard pregnancy-caution list. That is not clearance — ask your doctor about anything you use daily.
Fungal acne (malassezia)
No ingredient here is a recognised food source for malassezia.
Sensitive and reactive skin
A few ingredients here carry irritation flags. Reactive skin should patch test on the jawline for a few days before using it on the whole face.
Recorded ingredient risks
Alcohol, Microplastic, Silicone, Synthetic polymer

Ingredients by function

Most ingredients do more than one job, so these counts add up to more than the 37 ingredients on the label.

10
Plant extract

Botanical material, usually for antioxidants or scent

10
Texture agent

Sets the thickness, spread and stability of the formula

7
Occlusive

Forms a film that slows water loss

7
UV filter

Absorbs or scatters ultraviolet light

6
Solvent

Dissolves and carries everything else

4
Emollient

Softens and smooths by filling gaps between skin cells

3
Antioxidant

Neutralises free radicals from UV and pollution

3
Humectant

Draws water into the upper layers of skin

3
Preservative

Keeps the product free of microbial growth

2
Surfactant

Lifts oil and dirt, or holds oil and water together

1
Chelator

Binds trace metals that would otherwise spoil the formula

1
Exfoliant

Loosens or dissolves dead surface cells

1
pH adjuster

Sets the acidity the formula needs to work

Ingredient breakdown

Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.

1 Water Solvent
Estimated level
30–80%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

1st on the list, which puts it at an estimated 30–80% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration
3 scientific references
  • Skin Research and Technology, May 2015, pages 131-136
  • Skin Pharmacology and Applied Skin Physiology, November-December 1999, pages 344-351
  • Journal of Cosmetic Science, September-October 1993, pages 249-262
2 Homosalate UV filter
Estimated level
3.67–7.34%
Confidence
High — bounded by a regulatory limit
Roles
UV filter

2nd on the list. Regulation caps it at 7.34%, so it is present at roughly 3.67–7.34%.

Benzoic acid, 2-hydroxy-, 3,3,5-trimethylcyclohexyl ester

Anti-Aging
6 scientific references
  • Physical Chemistry Chemical Physics, July 2020, pages 15, 509–15, 519
  • Frontiers in Medicine, September 2019, ePublication
  • Journal of Cosmetic Dermatology, April 2019, pages 246–252
  • Photochemical & Photobiological Sciences, April 2019, pages 1, 556–1, 564
  • Journal of Clinical Aesthetic Dermatology, 2013, pages 16-26
  • Journal of the American Academy of Dermatology, 2013, page 867
3 Alcohol Denat. Texture agent
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent, Solvent, Preservative

3rd on the list, which puts it at an estimated 5–20% of the formula.

Alcohol Denat. is ethyl alcohol that is denatured with one or more denaturing agents in accordance with the national legislation of each European Community (EU) country.

Alcohol
Estimated level
2–5%
Confidence
High — bounded by a regulatory limit
Roles
UV filter

4th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.

2-Ethylhexyl salicylate

Anti-Aging
7 scientific references
  • JAMA, January 2020, ePublication
  • Cosmetic Ingredient Review, June 2019, pages 1-60
  • Photochemical & Photobiological Sciences, June 2019, pages 1, 556–1, 564
  • Catalysts, November 2017, ePublication
  • Journal of the American Academy of Dermatology, June 2005, pages 937–956
  • Skin Pharmacology and Applied Physiology, January-February 2003, pages 28–35
  • International Journal of Toxicology, 2003, pages 1–108
5 Dipropylene Glycol Texture agent
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent, Solvent

5th on the list, which puts it at an estimated 2–10% of the formula.

1,1'-Oxydipropan-2-ol; Oxydipropan-2-ol; Hydroxypropyloxypropanol

Estimated level
2–5%
Confidence
High — bounded by a regulatory limit
Roles
UV filter

6th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.

1-[4-(1,1-Dimethylethyl)phenyl]-3-(4-methoxyphenyl)propane-1,3-dione

Anti-Aging
6 scientific references
  • Photochemical and Photobiological Sciences, February 2021, pages 189–244; and January 2019, pages 198–207
  • JAMA, January 2020, pages 256–267
  • Journal of Applied Pharmaceutical Science, December 2014, pages 35-43
  • Household and Personal Care Today, March/April 2014, pages 4-8
  • Journal of Photochemistry and Photobiology B: Biology, 2014, pages 36–40
  • Indian Journal of Dermatology, September/October 2012, pages 335-342
7 Silica Exfoliant
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Exfoliant, Texture agent

7th on the list, which puts it at an estimated 1–5% of the formula.

Silicon dioxide

Oil Control
6 scientific references
  • Advances in Colloid and Interface Science, July 2021, page 10, 2437
  • Cosmetic Ingredient Review, October 2019, pages 1-34
  • Nanomedicine, August 2019, pages 2, 243-2, 267
  • Biological and Pharmaceutical Bulletin, 2016, pages 1, 201-1, 205
  • European Journal of Pharmaceutics and Biopharmaceutics, January 2015, pages 116-125
  • Cosmetics & Toiletries, April 2015, pages 36-45
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Occlusive

8th on the list, which puts it at an estimated 1–5% of the formula.

2-Propenoic acid, 2-methyl-, 1,2-ethanediyl ester, polymer with methyl 2-methyl-2-propenoate

Microplastic
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

9th on the list, which puts it at an estimated 1–5% of the formula.

2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]

Anti-Aging
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

10th on the list, which puts it at an estimated 1–5% of the formula.

Isopentyl p-methoxycinnamate

11 Octocrylene UV filter
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

11th on the list, which puts it at an estimated 1–3% of the formula.

2-Cyano-3,3-Diphenyl Acrylic Acid 2-Ethylhexyl Ester

Anti-Aging
5 scientific references
  • Journal of the European Academy of Dermatology and Venereology, Supplement 7, November 2019, pages 25–33
  • Environment International, November 2019, ePublication
  • Pharmaceutics, May 2017, pages 1–24
  • Contact Dermatitis, January 2018, pages 224–225; April 2014, pages 193-204; and January 2003, pages 46-47
  • Quimica Nova, July 2014, ePublication
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant, Texture agent

12th on the list, which puts it at an estimated 1–3% of the formula.

Bis-PEG/PPG-20/5 PEG/PPG-20/5 Dimethicone is a derivative of Dimethicone containing an alkoxylated side chain with an average of 20 moles of ethylene oxide and 5 moles of propylene oxide, and end-blocked with an average of 20 moles of ethylene oxide and 5 moles of propylene oxide

Silicone
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant, Texture agent

13th on the list, which puts it at an estimated 1–3% of the formula.

Methoxy PEG/PPG-25/4 Dimethicone is the methyl ether of an alkyoxylated derivative of Dimethicone containing an average of 25 moles of ethylene oxide and 4 moles of propylene oxide

Silicone
14 Dimethicone Emollient
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Occlusive

14th on the list, which puts it at an estimated 1–3% of the formula.

Dimethicone

Hydration Silicone
7 scientific references
  • FDA Code of Federal Regulations, April 2020, ePublication
  • International Journal of Toxicology, May 2014, pages 65S-115S
  • The Journal of Clinical and Aesthetic Dermatology, May 2014, pages 36-44
  • Dermatologic Therapy, May 2012, pages 229-233
  • Clinics in Dermatology, May-June 2012, pages 345-348
  • International Journal of Cosmetic Science, January 2008, pages 19-33
  • Skin Research and Technology, May 2000, pages 77-80
15 Caprylyl Glycol Emollient
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

15th on the list, which puts it at an estimated 1–3% of the formula.

Octane-1,2-diol

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Occlusive, Texture agent

16th on the list, which puts it at an estimated 1–3% of the formula.

C10-30 alkyl propenoate, polymer with propenoic acid, butenoic acidand/or alkyl propenoates, product with propenyl sucrose ether or propenyl 2,2-dihydroxymethyl-1,3-propanediol

Synthetic polymer
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line

17th on the list, which puts it at an estimated 1–3% of the formula.

Decanoic acid, ester with 1,2,3-propanetriol octanoate; Glycerides, mixed decanoyl and octanoyl

Hydration
5 scientific references
  • International Journal of Toxicology, September 2020, pages 34-35
  • Periodica Polytechnica Chemical Engineering, 2014, pages 43-48
  • International Journal of Toxicology, January 2003, pages 4-5
  • Food and Chemical Toxicology, January 2000, pages 79-98
  • Journal of the Society of Cosmetic Chemists, August 1985, pages 303-311
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Propanediol, 3-(2-ethylhexyloxy)

Hydration
5 scientific references
  • PLoS One, October 2016, ePublication
  • Contact Dermatitis, May 2016, pages 281-288
  • International Journal of Toxicology, September 2013, pages 5S-21S
  • Personal Care, 2008, pages 1-4
  • Cosmetic Science Technology, 2006, pages 1-11
19 Sodium Hydroxide pH adjuster
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
pH adjuster

19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Sodium hydroxide

20 1,2-hexanediol Solvent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Solvent

20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

21 BHT Antioxidant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Antioxidant

21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2,6-Di-tert-butyl-p-cresol

22 Disodium Edta Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent, Chelator

22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Disodium dihydrogen ethylenediaminetetraacetate

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Limonia Acidissima Extract is the extract of the whole Lemon tree, Limonia acidissima L., Rutaceae

24 Butylene Glycol Humectant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Texture agent, Solvent

24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration
5 scientific references
  • CosmeticsInfoorg, Accessed March 2021, ePublication
  • US Food and Drug Administration Code of Federal Regulations</em>, Accessed March 2021, ePublication
  • International Journal of Toxicology, May 2011, pages 5S-16S
  • Skin Research and Technology, November 2007, pages 417-24
  • Journal of the American College of Toxicology, September 1985, pages 223-248
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Occlusive, Texture agent

25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Vinylpyrrolidone Hexadecene Copolymer

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Solvent

26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Decamethylcyclopentasiloxane

Hydration Silicone
4 scientific references
  • CosmeticsInfoorg, Accessed May 2021, ePublication
  • Regulatory Toxicology and Pharmacology, February 2016, pages S67-S76
  • Environmental International, November 2015, pages 55-63
  • International Journal of Toxicology, December 2011, pages 149-227
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Occlusive, Texture agent

27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Copolymer of dimethicone acrylate and one or more monomers of acrylic acid, methacrylic acid or one of their simple esters

Synthetic polymer
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Chrysanthemum Indicum Flower Extract is the extract of the flowers of Chrysanthemum indicum L., Asteraceae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
UV filter, Humectant, Emollient, Occlusive, Antioxidant, Plant extract, Preservative

29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Camellia Sinensis Leaf Extract is an extract of the leaves of the Tea, Camellia sinensis, Theaceae

Anti-Aging Soothing
30 Phenoxyethanol Preservative
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Preservative

30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2-Phenoxyethanol

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Antioxidant, Plant extract

31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Morus Alba Fruit Extract is an extract obtained from the fruits of the White Mulberry, Morus alba L., Moraceae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Cinnamomum Cassia Bark Extract is an extract obtained from the dried bark of the Chinese Cinnamon, Cinnamomum cassia (L.), Lauraceae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Artemisia Princeps Leaf Extract is an extract of the leaves of Artemisia princeps, Compositae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Occlusive, Plant extract

34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Diospyros Kaki Leaf Extract is an extract of the leaves of the Kaki, Diospyros kaki L., Ebenaceae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Plant extract

35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Pueraria Lobata Root Extract is an extract of the roots of Pueraria lobata, Fabacea

Anti-Aging Evens Skin Tone
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Centaurea Cyanus Flower Water is an aqueous solution of the steam distillate obtained from the Cornflower, Centaurea cyanus L., Asteraceae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Helichrysum Italicum Flower Water is an aqueous solution of the steam distillate obtained from the flowers of the Everlasting, Helichrysum italicum, Compositae

Not yet matched to our database

These are printed on the label but have not been linked to an ingredient record yet, so they are excluded from the analysis above.

fragrance thymus vulgaris leaf water

People also compare

Products in the same category that share this formula's distinguishing ingredients.

ALL AROUND SAFE BLOCK ESSENCE SUN MILK

Missha

Shares 10 key ingredients with ALL AROUND SAFE BLOCK AQUA SUN GEL: Water, Butylene Glycol, Octocrylene, Ethylhexyl Salicylate, Butyl Methoxydibenzoylmethane

Anthelios Oil Control SPF 50+ Gel-Cream

La Roche-Posay

Shares 9 key ingredients with ALL AROUND SAFE BLOCK AQUA SUN GEL: Water, Homosalate, Silica, Ethylhexyl Salicylate, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine

Essence Sun Pact

VT Cosmetics

Shares 8 key ingredients with ALL AROUND SAFE BLOCK AQUA SUN GEL: Water, Butylene Glycol, Ethylhexyl Salicylate, Octocrylene, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine

Glutathione Niacinamide Sunscreen

APLB

Shares 8 key ingredients with ALL AROUND SAFE BLOCK AQUA SUN GEL: Water, Butylene Glycol, Ethylhexyl Salicylate, Octocrylene, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine

Frequently asked questions

What ingredients are in ALL AROUND SAFE BLOCK AQUA SUN GEL?

WATER, HOMOSALATE, ALCOHOL DENAT., ETHYLHEXYL SALICYLATE, DIPROPYLENE GLYCOL, BUTYL METHOXYDIBENZOYLMETHANE, SILICA, METHYL METHACRYLATE CROSSPOLYMER, BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE, ISOAMYL P-METHOXYCINNAMATE, OCTOCRYLENE, BIS-PEG/PPG-20/5 PEG/PPG-20/5 DIMETHICONE, METHOXY PEG/PPG-25/4 DIMETHICONE, DIMETHICONE, CAPRYLYL GLYCOL, ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER, CAPRYLIC/CAPRIC TRIGLYCERIDE, ETHYLHEXYLGLYCERIN, SODIUM HYDROXIDE, 1,2-HEXANEDIOL, BHT, DISODIUM EDTA, LIMONIA ACIDISSIMA EXTRACT, BUTYLENE GLYCOL, VP/HEXADECENE COPOLYMER, CYCLOPENTASILOXANE, ACRYLATES/DIMETHICONE COPOLYMER, CHRYSANTHEMUM INDICUM FLOWER EXTRACT, CAMELLIA SINENSIS LEAF EXTRACT, PHENOXYETHANOL, MORUS ALBA FRUIT EXTRACT, CINNAMOMUM CASSIA BARK EXTRACT, ARTEMISIA PRINCEPS LEAF EXTRACT, DIOSPYROS KAKI LEAF EXTRACT, PUERARIA LOBATA ROOT EXTRACT, CENTAUREA CYANUS FLOWER WATER, HELICHRYSUM ITALICUM FLOWER WATER.

How do I use ALL AROUND SAFE BLOCK AQUA SUN GEL?

At the last step of your routine evenly apply on the face, neck, arms, legs, and genlty pat into the skin

What skin types is ALL AROUND SAFE BLOCK AQUA SUN GEL good for?

Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry) skin.

Is ALL AROUND SAFE BLOCK AQUA SUN GEL good for sensitive skin?

Some ingredients here carry irritation flags, so sensitive skin should patch test on the jawline for a few days before applying it to the whole face.

Can I use ALL AROUND SAFE BLOCK AQUA SUN GEL while pregnant?

Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.

Does ALL AROUND SAFE BLOCK AQUA SUN GEL contain alcohol?

Yes — it contains Alcohol Denat..

Is ALL AROUND SAFE BLOCK AQUA SUN GEL silicone free?

No — it contains Bis-peg/ppg-20/5 Peg/ppg-20/5 Dimethicone, Methoxy Peg/ppg-25/4 Dimethicone, Dimethicone, Cyclopentasiloxane, Acrylates/dimethicone Copolymer.

What can I layer with ALL AROUND SAFE BLOCK AQUA SUN GEL?

It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.

When should I apply ALL AROUND SAFE BLOCK AQUA SUN GEL?

Use it in the morning, final morning step, before makeup.

How many ingredients does ALL AROUND SAFE BLOCK AQUA SUN GEL have?

It lists 37 ingredients, of which 6 are recorded as actives.

Who makes ALL AROUND SAFE BLOCK AQUA SUN GEL?

Missha, a brand based in Korea.

What UV filters are in ALL AROUND SAFE BLOCK AQUA SUN GEL?

It filters UV with Homosalate (homosalate), Octisalate (ethylhexyl salicylate), Avobenzone (butyl methoxydibenzoylmethane), Tinosorb S (bis-ethylhexyloxyphenol methoxyphenyl triazine), Amiloxate (isoamyl p-methoxycinnamate), Octocrylene (octocrylene).

Is ALL AROUND SAFE BLOCK AQUA SUN GEL broad spectrum?

Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.

Does ALL AROUND SAFE BLOCK AQUA SUN GEL leave a white cast?

Unlikely. It filters with organic (chemical) filters only, which dissolve into the formula rather than sitting on the surface, so they do not leave a white cast.

Is ALL AROUND SAFE BLOCK AQUA SUN GEL reef safe?

It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.

Can I wear ALL AROUND SAFE BLOCK AQUA SUN GEL under makeup?

Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.

How often should I reapply ALL AROUND SAFE BLOCK AQUA SUN GEL?

Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.

Brand
Missha
Country
Korea

Reviews

0 total

Log in to leave a review.

No reviews yet. Be the first to share your thoughts.