La Roche-Posay
Anthelios UVMune 400 Invisible Fluid Tinted SPF50+
face sunscreen
La Roche-Posay
face sunscreen
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testWith over 25 years of skincare innovation, La Roche-Posay introduces the Anthelios UVMune 400 Invisible Tinted Fluid SPF50+. Designed for daily use, even on sensitive skin, the ultra-light formula offers very high, broad-spectrum protection against UVA, UVB, and infrared rays. Powered by exclusive Mexoryl 400, a next-generation photostable filter, the suncream helps minimise the appearance of fine lines. Resistant to water, sweat, and sand, the fluid blends seamlessly for a non-greasy, barely-there finish that’s suitable for the face and even the delicate eye area.
Anthelios UVMune 400 Invisible Fluid Tinted SPF50+ is a lightweight sunscreen from La Roche-Posay, a brand based in France. It is rated SPF 50+. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 30 ingredients, each broken down in full below.
By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Glycerin, Propanediol and Water, humectants that pull water into the upper layers of skin rather than sealing it there.
It uses a hybrid filter system — Octisalate, Tinosorb S, Uvinul T 150, Avobenzone, Titanium Dioxide, Uvinul A Plus, Mexoryl XL and Mexoryl SX — combining mineral and organic filters. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. The formula contains a photounstable filter alongside a stabiliser, which is the standard and effective way to keep it from degrading in sunlight.
Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Glycerin, Propanediol, Water and Diisopropyl Sebacate.
Oil control: Moderate. Ingredients that moderate sebum or absorb shine, and here that comes from Silica and Triethyl Citrate.
On richness alone it suits Balanced, Combination (oily) and Oily skin best, and is the least natural fit for Dry and Combination (dry) skin. A few ingredients carry irritation flags, so reactive skin should patch test before using it on the whole face.
The formula contributes little or nothing on barrier support, antioxidant protection, brightening and tone and cell renewal. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is essential-oil-free, paraben-free, microplastic-free, sulfate-free, oil-free and no animal-derived ingredients. Those claims come from the ingredient list itself, not from the packaging. It does contain fragrance and drying alcohol, worth knowing if your skin reacts to any of them.
Use it in the morning. In a routine it goes final morning step, before makeup. Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms. Reapply every two hours of sun exposure, and after swimming or towelling off. Let it set for a couple of minutes before makeup so it does not pill.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
A few ingredients here carry irritation flags. Reactive skin should patch test on the jawline for a few days before using it on the whole face.
Based on the curated benefits documented for this product's ingredients.
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Attracts and locks in moisture to keep skin plump and dewy
Regulates sebum production to reduce shine and greasiness
Brightens and balances complexion for a more uniform appearance
Calms redness, irritation, and inflammation for sensitive skin
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
Hybrid mineral and organic filter system · broad-spectrum through UVA I
A weak filter used mainly as a solvent — it dissolves the crystalline filters (avobenzone, oxybenzone) so they can be formulated at all.
One of the most photostable filters in use, and it stabilises avobenzone and octinoxate alongside it. Oil-soluble, cosmetically light, no white cast.
The most efficient UVB absorber available by weight, which is why high-SPF formulas reach SPF 50+ without feeling heavy. Contributes nothing to UVA.
The workhorse UVA filter, and the fragile one: it loses a large share of its protection within an hour of sun unless the formula pairs it with a stabiliser such as octocrylene or Tinosorb S.
Strong UVB and short-UVA protection, but it stops before UVA I — a mineral formula leaning on titanium dioxide alone needs zinc oxide beside it for deep UVA.
A photostable replacement for avobenzone: it peaks at 354 nm, deep in UVA I, and does not need a stabiliser to survive the day.
Oil-soluble and broad-spectrum, with two absorption peaks covering UVB and UVA.
Water-soluble UVA filter, which is unusual — most UVA filters are oil-soluble.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
3rd on the list, which puts it at an estimated 5–20% of the formula.
Triethyl citrate
4th on the list, which puts it at an estimated 2–10% of the formula.
Diisopropyl sebacate
5th on the list, which puts it at an estimated 2–10% of the formula.
Silicon dioxide
6th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.
2-Ethylhexyl salicylate
7th on the list, which puts it at an estimated 1–5% of the formula.
2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]
8th on the list, which puts it at an estimated 1–5% of the formula.
Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone
9th on the list, which puts it at an estimated 1–5% of the formula.
1-[4-(1,1-Dimethylethyl)phenyl]-3-(4-methoxyphenyl)propane-1,3-dione
10th on the list, which puts it at an estimated 1–5% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
11th on the list, which puts it at an estimated 1–3% of the formula.
1,3-dihydroxypropane
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Decanoic acid, ester with 1,2,3-propanetriol octanoate; Glycerides, mixed decanoyl and octanoyl
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
A photounstable filter is present, paired with a stabiliser
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Parfum
Alcohol Denat.
Drometrizole Trisiloxane
CI 77891, CI 77491, CI 77492, CI 77499
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.
This product is the "Protect" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 30 ingredients on the label.
Absorbs or scatters ultraviolet light
Sets the thickness, spread and stability of the formula
Changes how the product smells or looks
Dissolves and carries everything else
Forms a film that slows water loss
Softens and smooths by filling gaps between skin cells
Lifts oil and dirt, or holds oil and water together
Neutralises free radicals from UV and pollution
Draws water into the upper layers of skin
Binds trace metals that would otherwise spoil the formula
Loosens or dissolves dead surface cells
Sets the acidity the formula needs to work
Keeps the product free of microbial growth
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Alcohol Denat. is ethyl alcohol that is denatured with one or more denaturing agents in accordance with the national legislation of each European Community (EU) country.
3rd on the list, which puts it at an estimated 5–20% of the formula.
Triethyl citrate
4th on the list, which puts it at an estimated 2–10% of the formula.
Diisopropyl sebacate
5th on the list, which puts it at an estimated 2–10% of the formula.
Silicon dioxide
6th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.
2-Ethylhexyl salicylate
7th on the list, which puts it at an estimated 1–5% of the formula.
2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]
8th on the list, which puts it at an estimated 1–5% of the formula.
Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone
9th on the list, which puts it at an estimated 1–5% of the formula.
1-[4-(1,1-Dimethylethyl)phenyl]-3-(4-methoxyphenyl)propane-1,3-dione
10th on the list, which puts it at an estimated 1–5% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
11th on the list, which puts it at an estimated 1–3% of the formula.
1,3-dihydroxypropane
12th on the list, which puts it at an estimated 1–3% of the formula.
C12-22 Alkyl Acrylate/Hydroxyethylacrylate Copolymer is a copolymer of C12-22 alkyl acrylate and hydroxyethylacrylate
13th on the list, which puts it at an estimated 1–3% of the formula.
CI 77891 is classed chemically as an inorganic colour (see also INCI: Titanium dioxide). It conforms to the formula
14th on the list, which puts it at an estimated 1–3% of the formula.
Methoxypropylamino Cyclohexenylidene Ethoxyethylcyanoacetate is the organic compound
15th on the list, which puts it at an estimated 1–3% of the formula.
Inert siliceous material consisting chiefly of silicon, aluminum, sodium and potassium oxides
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Decanoic acid, ester with 1,2,3-propanetriol octanoate; Glycerides, mixed decanoyl and octanoyl
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
C10-30 alkyl propenoate, polymer with propenoic acid, butenoic acidand/or alkyl propenoates, product with propenyl sucrose ether or propenyl 2,2-dihydroxymethyl-1,3-propanediol
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octane-1,2-diol
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Diiron trioxide; Ferric oxide
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Iron oxide
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Triiron tetraoxide
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Phenol,2-(2H-Benzotriazol-2-yl)-4-Methyl-6-(2-Methyl-3-(1,3,3,3-Tetramethyl-1-(Trimethylsilyl)Oxy)-Disiloxanyl)Propyl
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Cellulose, 2-hydroxyethyl ether
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium hydrogen N-(1-oxooctadecyl)-L-glutamate
27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,3'-(1,4-Phenylenedimethylene)bis[7,7-dimethyl-2-oxo-bicyclo[2.2.1]heptane-1-methanesulfonic acid]
28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,2',2''-Nitrilotriethanol
29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
L-Aspartic acid, N,N'-1,2-ethanediylbis-, trisodium salt
30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Parfum is a term for ingredient labelling used to identify that a product contains a material or a combination of materials normally added to a cosmetic to produce or to mask a particular odour. According to Article 19 of the Cosmetics Regulation, 'Perfume and aromatic compositions and their raw materials shall be referred to by the terms ‘parfum’ or ‘aroma’. '
Products in the same category that share this formula's distinguishing ingredients.
La Roche-Posay
Shares 15 key ingredients with Anthelios UVMune 400 Invisible Fluid Tinted SPF50+: Water, Triethyl Citrate, Diisopropyl Sebacate, Silica, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine
La Roche-Posay
Shares 15 key ingredients with Anthelios UVMune 400 Invisible Fluid Tinted SPF50+: Water, Triethyl Citrate, Diisopropyl Sebacate, Silica, Ethylhexyl Salicylate
La Roche-Posay
Shares 13 key ingredients with Anthelios UVMune 400 Invisible Fluid Tinted SPF50+: Water, Diisopropyl Sebacate, Silica, Ethylhexyl Salicylate, Ethylhexyl Triazone
La Roche-Posay
Shares 12 key ingredients with Anthelios UVMune 400 Invisible Fluid Tinted SPF50+: Water, Silica, Diisopropyl Sebacate, Ethylhexyl Triazone, Butyl Methoxydibenzoylmethane
La Roche-Posay
Shares 12 key ingredients with Anthelios UVMune 400 Invisible Fluid Tinted SPF50+: Water, Diisopropyl Sebacate, Ethylhexyl Salicylate, Ethylhexyl Triazone, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine
La Roche-Posay
Shares 12 key ingredients with Anthelios UVMune 400 Invisible Fluid Tinted SPF50+: Water, Silica, Diisopropyl Sebacate, Ethylhexyl Triazone, Butyl Methoxydibenzoylmethane
WATER, ALCOHOL DENAT., TRIETHYL CITRATE, DIISOPROPYL SEBACATE, SILICA, ETHYLHEXYL SALICYLATE, BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE, ETHYLHEXYL TRIAZONE, BUTYL METHOXYDIBENZOYLMETHANE, GLYCERIN, PROPANEDIOL, C12-22 ALKYL ACRYLATE/HYDROXYETHYLACRYLATE COPOLYMER, CI 77891, METHOXYPROPYLAMINO CYCLOHEXENYLIDENE ETHOXYETHYLCYANOACETATE, PERLITE, TOCOPHEROL, CAPRYLIC/CAPRIC TRIGLYCERIDE, ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER, CAPRYLYL GLYCOL, CI 77491, CI 77492, CI 77499, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE, DROMETRIZOLE TRISILOXANE, HYDROXYETHYLCELLULOSE, SODIUM STEAROYL GLUTAMATE, TEREPHTHALYLIDENE DICAMPHOR SULFONIC ACID, TRIETHANOLAMINE, TRISODIUM ETHYLENEDIAMINE DISUCCINATE, PARFUM.
For daily usage and sun exposure. Shake before use. Apply the sunscreen product just before exposure. Re-apply frequently and generously to maintain protection, especially after perspiring or towelling.
Judged on how rich the formula reads from its ingredient list, it suits Balanced, Combination (oily), Oily skin best. It is the least natural fit for Dry, Combination (dry) skin.
Some ingredients here carry irritation flags, so sensitive skin should patch test on the jawline for a few days before applying it to the whole face.
No ingredient in this formula is a recognised food source for malassezia, the yeast behind fungal acne.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
No — it contains Parfum.
Yes — it contains Alcohol Denat..
No — it contains Drometrizole Trisiloxane.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.
Use it in the morning, final morning step, before makeup.
It lists 30 ingredients, of which 7 are recorded as actives.
La Roche-Posay, a brand based in France.
It filters UV with Octisalate (ethylhexyl salicylate), Tinosorb S (bis-ethylhexyloxyphenol methoxyphenyl triazine), Uvinul T 150 (ethylhexyl triazone), Avobenzone (butyl methoxydibenzoylmethane), Titanium Dioxide (titanium dioxide), Uvinul A Plus (diethylamino hydroxybenzoyl hexyl benzoate), Mexoryl XL (drometrizole trisiloxane), Mexoryl SX (terephthalylidene dicamphor sulfonic acid).
Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.
It may leave a slight cast. The formula mixes mineral and organic filters, so any cast is usually lighter than a fully mineral sunscreen's.
It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.
Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.
Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect