1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
CeraVe
PM Facial Moisturizing Lotion
face cream
CeraVe
face cream
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testCeraVe PM Facial Moisturizer, formulated with niacinamide, hyaluronic acid, and three essential ceramides, uses our MVE Technology to deliver a steady stream of much-needed moisture for continuous hydration throughout the night while helping restore the skin barrier.
PM Facial Moisturizing Lotion is a lightweight cream from CeraVe, a brand based in USA. The formula is built mainly around hydration and barrier support. The ingredient list runs to 24 ingredients, each broken down in full below.
By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Glycerin, Sodium Hyaluronate and Ethylhexylglycerin, humectants that pull water into the upper layers of skin rather than sealing it there.
Hydration: Very high. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Glycerin, Sodium Hyaluronate, Ethylhexylglycerin and Water.
Barrier support: High. Lipids and repair signals that support skin barrier integrity, and here that comes from Niacinamide, Ceramide NP, Ceramide AP and Ceramide EOP.
Soothing: Moderate. Ingredients aimed at visible redness and reactivity, and here that comes from Niacinamide and Sodium Hyaluronate.
Oil control: Moderate. Ingredients that moderate sebum or absorb shine, and here that comes from Niacinamide.
On richness alone it suits Balanced skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on antioxidant protection, cell renewal and firmness signalling. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is fragrance-free, essential-oil-free, no drying alcohol, paraben-free, microplastic-free and sulfate-free. Those claims come from the ingredient list itself, not from the packaging.
It can be used morning and evening. In a routine it goes after serums. Seal in your serums with it; in the morning, sunscreen still goes on top.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Calms redness, irritation, and inflammation for sensitive skin
Tightens and refines the look of enlarged pores
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
3rd on the list, which puts it at an estimated 5–20% of the formula.
Decanoic acid, ester with 1,2,3-propanetriol octanoate; Glycerides, mixed decanoyl and octanoyl
4th on the list, which puts it at an estimated 2–10% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
5th on the list, which puts it at an estimated 2–10% of the formula.
Alcohols, C16-18
7th on the list, which puts it at an estimated 1–5% of the formula.
Ceramide NP,1,3,4-Octadecanetriol, 2-Octadecanamide,Stearoyl-C18-Phytosphingosine,Stearoyl-4-Hydroxysphinganine
8th on the list, which puts it at an estimated 1–5% of the formula.
1,3,4-Octadecanetriol, 2-(2-Hydroxy) Stearamide
9th on the list, which puts it at an estimated 1–5% of the formula.
Ceramide EOP,1,3,4-Octadecanetriol, 2-Stearoyloxyheptacosamide,Stearoyloxyheptacosanoyl-C18-Phytosphingosine,Stearoyloxyheptacosanoyl-4-Hydroxysphinganine
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Dimethicone
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Docosyltrimethylammonium methyl sulphate
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium, salt
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Cholest-5-en-3-ol (beta)-
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Dimethicone
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.
This product is the "Moisturise" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 24 ingredients on the label.
Lifts oil and dirt, or holds oil and water together
Sets the thickness, spread and stability of the formula
Changes how skin behaves rather than how it feels
Softens and smooths by filling gaps between skin cells
Draws water into the upper layers of skin
Forms a film that slows water loss
Sets the acidity the formula needs to work
Dissolves and carries everything else
Binds trace metals that would otherwise spoil the formula
Keeps the product free of microbial growth
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
3rd on the list, which puts it at an estimated 5–20% of the formula.
Decanoic acid, ester with 1,2,3-propanetriol octanoate; Glycerides, mixed decanoyl and octanoyl
4th on the list, which puts it at an estimated 2–10% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
5th on the list, which puts it at an estimated 2–10% of the formula.
Alcohols, C16-18
6th on the list, which puts it at an estimated 2–10% of the formula.
Potassium dihydrogenorthophosphate
7th on the list, which puts it at an estimated 1–5% of the formula.
Ceramide NP,1,3,4-Octadecanetriol, 2-Octadecanamide,Stearoyl-C18-Phytosphingosine,Stearoyl-4-Hydroxysphinganine
8th on the list, which puts it at an estimated 1–5% of the formula.
1,3,4-Octadecanetriol, 2-(2-Hydroxy) Stearamide
9th on the list, which puts it at an estimated 1–5% of the formula.
Ceramide EOP,1,3,4-Octadecanetriol, 2-Stearoyloxyheptacosamide,Stearoyloxyheptacosanoyl-C18-Phytosphingosine,Stearoyloxyheptacosanoyl-4-Hydroxysphinganine
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Propenoic acid, polymer with 2,2-bis(hydroxymethyl)propane-1,3-diol 2-propenyl ether
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Dimethicone
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
C16-18 alcohols, ethoxylated (20 mol EO average molar ratio)
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Docosyltrimethylammonium methyl sulphate
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium 2-(1-carboxylatoethoxy)-1-methyl-2-oxoethyl laurate
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium, salt
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Cholest-5-en-3-ol (beta)-
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Phenoxyethanol
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Disodium dihydrogen ethylenediaminetetraacetate
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Dipotassium hydrogenorthophosphate
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octane-1,2-diol
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,3,4-Octadecanetriol, 2-amino-, (2S, 3S, 4R)-
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Xanthan gum
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2,3-Propanetriol, homopolymer, isodecanoates (1:2) (3 mol glycerol average molar ratio)
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
Products in the same category that share this formula's distinguishing ingredients.
CeraVe
Shares 12 key ingredients with PM Facial Moisturizing Lotion: Water, Niacinamide, Caprylic/capric Triglyceride, Glycerin, Cetearyl Alcohol
CeraVe
Shares 12 key ingredients with PM Facial Moisturizing Lotion: Water, Glycerin, Niacinamide, Cetearyl Alcohol, Caprylic/capric Triglyceride
CeraVe
Shares 12 key ingredients with PM Facial Moisturizing Lotion: Water, Glycerin, Caprylic/capric Triglyceride, Dimethicone, Ceramide NP
CeraVe
Shares 11 key ingredients with PM Facial Moisturizing Lotion: Water, Glycerin, Dimethicone, Niacinamide, Ceramide NP
CeraVe
Shares 11 key ingredients with PM Facial Moisturizing Lotion: Water, Glycerin, Caprylic/capric Triglyceride, Ceramide NP, Ceramide AP
CeraVe
Shares 11 key ingredients with PM Facial Moisturizing Lotion: Water, Glycerin, Cetearyl Alcohol, Caprylic/capric Triglyceride, Ceramide NP
WATER, GLYCERIN, CAPRYLIC/CAPRIC TRIGLYCERIDE, NIACINAMIDE, CETEARYL ALCOHOL, POTASSIUM PHOSPHATE, CERAMIDE NP, CERAMIDE AP, CERAMIDE EOP, CARBOMER, DIMETHICONE, CETEARETH-20, BEHENTRIMONIUM METHOSULFATE, SODIUM LAUROYL LACTYLATE, SODIUM HYALURONATE, CHOLESTEROL, PHENOXYETHANOL, DISODIUM EDTA, DIPOTASSIUM PHOSPHATE, CAPRYLYL GLYCOL, PHYTOSPHINGOSINE, XANTHAN GUM, POLYGLYCERYL-3 DIISOSTEARATE, ETHYLHEXYLGLYCERIN.
NIACINAMIDE, CERAMIDE NP, CERAMIDE AP, CERAMIDE EOP, SODIUM HYALURONATE.
Apply the liberally to the face and neck at night, or as directed by a physician.
Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry) skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
One ingredient could feed malassezia: Polyglyceryl-3 Diisostearate. That describes the yeast's food supply, not a prediction that it will cause a breakout.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
Yes. Reading the full ingredient list, this formula is fragrance-free.
No. Reading the full ingredient list, this formula is no drying alcohol.
No — it contains Dimethicone.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.
Use it morning and evening, after serums.
It lists 24 ingredients, of which 5 are recorded as actives.
CeraVe, a brand based in USA.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect