Mizon Inout Smooth Mineral Sun Stick SPF50 PA++++

Mizon

Inout Smooth Mineral Sun Stick SPF50 PA++++

face body sunscreen stick

Added Last edited

Fit by skin type

General, ingredient-based — not your personalized match.

Dry
68%
Combination (dry)
68%
Balanced
98%
Combination (oily)
72%
Oily
72%

See how this fits your skin

Take the skin test and I'll show you how suitable this product is for you.

Take the skin test
31
Ingredients
4
Benefits
1
Actives
Find Dupes

The Mizon Inout Smooth Mineral Sun Stick offers broad-spectrum sun protection with SPF50 PA++++ in a convenient, portable stick format. Designed for both face and body, it combines mineral UV filters with skincare ingredients to hydrate, soothe, and enhance skin elasticity. The formula is ideal for sensitive skin, providing a non-sticky, refreshing finish.

Key Insights

Benefits

4
Anti-Aging
Hydration
Oil Control
Soothing

Active Ingredients

1
Hyaluronic acid

Risks

3
Microplastic
Silicone
Synthetic polymer

About Inout Smooth Mineral Sun Stick SPF50 PA++++

Overview

Inout Smooth Mineral Sun Stick SPF50 PA++++ is a cushioning sunscreen stick from Mizon. It is rated SPF 50 PA++++. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 31 ingredients, each broken down in full below.

Texture and finish

By its ingredient list the formula reads as moderately cushioned — emollient enough to feel like a cream, without the heaviest occlusives near the top. It contains both silicones and oils, a combination that usually finishes smooth and slightly satin and sits well under makeup. Hydration is handled by Butylene Glycol Dicaprylate/dicaprate, Hyaluronic Acid and Butylene Glycol, humectants that pull water into the upper layers of skin rather than sealing it there.

UV filter system

It is a mineral sunscreen, filtering with Zinc Oxide. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.

What the formula does

Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Butylene Glycol Dicaprylate/dicaprate, Hyaluronic Acid, Butylene Glycol and Ethylhexylglycerin.

Soothing: Moderate. Ingredients aimed at visible redness and reactivity, and here that comes from C12-15 Alkyl Benzoate and Zinc Oxide.

Oil control: Moderate. Ingredients that moderate sebum or absorb shine, and here that comes from Zinc Oxide.

Who it suits

On richness alone it suits Balanced skin best, and is the least natural fit for Dry, Combination (dry), Combination (oily) and Oily skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.

What it does not target

The formula contributes little or nothing on barrier support, antioxidant protection, brightening and tone and cell renewal. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.

What is not in it

Reading the full list, the formula is fragrance-free, essential-oil-free, no drying alcohol, paraben-free, sulfate-free and dye-free. Those claims come from the ingredient list itself, not from the packaging.

Where it fits in a routine

Use it in the morning. In a routine it goes final morning step, before makeup. Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms. Reapply every two hours of sun exposure, and after swimming or towelling off. Let it set for a couple of minutes before makeup so it does not pill.

This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.

Pros and cons

Drawn purely from the ingredient list

Pros

  • Broad-spectrum coverage that reaches into UVA I
  • Every UV filter in it is photostable
  • No fragrance or declared allergens
  • No essential oils
  • No drying alcohol
  • Strong humectant content for hydration
  • No common irritants flagged in the list

Things to know

  • Contains a solid synthetic polymer (microplastic)
  • 5 ingredients could feed malassezia (fungal acne)

Which skin types it suits

Scored on how rich or light the formula reads from its INCI order.

Suitable for

  • Balanced skin

Less suitable for

  • Dry skin
  • Combination (dry) skin
  • Combination (oily) skin
  • Oily skin

Sensitive skin

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Skin concerns

Based on the curated benefits documented for this product's ingredients.

Helps with

  • Hydration 11 ingredients

    Attracts and locks in moisture to keep skin plump and dewy

  • Anti-Aging 2 ingredients

    Boosts collagen and cell turnover to reduce fine lines and wrinkles

  • Oil Control 1 ingredient

    Regulates sebum production to reduce shine and greasiness

  • Soothing 1 ingredient

    Calms redness, irritation, and inflammation for sensitive skin

Does not target

Anti-Acne Blackhead Reducing Dark Spot Fading Evens Skin Tone Pore Minimizer Smooths Bumpy Skin

None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.

UV filters

Mineral filter system · broad-spectrum through UVA I

Zinc Oxide

zinc oxide
Protects from
UVB (290–320 nm), UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Mineral (inorganic) filter
Approved in
Approved worldwide
Maximum permitted level
Up to 25% (EU, US, KR)

The only single filter that covers the whole UVB–UVA1 range on its own. Scatters and absorbs rather than purely absorbing, and can leave a white cast at high loads.

Key ingredients

The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.

1st on the list. Regulation caps it at 25%, so it is present at roughly 10–25%.

Zinc oxide (CI 77947)

Anti-Aging Soothing Oil Control

2nd on the list, which puts it at an estimated 5–20% of the formula.

2-Octyldodecan-1-ol

Hydration

5th on the list, which puts it at an estimated 2–10% of the formula.

2-propenoic acid, 2-methyl-, polymer with ethyl 2-propenoate and methyl 2-methyl-2-propenoate

Hydration

6th on the list, which puts it at an estimated 2–10% of the formula.

Benzoic acid, C12-15 alkyl esters

Hydration

7th on the list, which puts it at an estimated 1–5% of the formula.

Benzoic acid, 2-hydroxy-, 2-butyloctyl ester

Hydration

11th on the list, which puts it at an estimated 1–3% of the formula.

Bis(16-methylheptadecyl) malate

Hydration
Hyaluronic Acid Hyaluronic acid

21st on the list, which puts it at an estimated 1–3% of the formula.

Hyaluronic acid

Anti-Aging Hydration

22nd on the list, which puts it at an estimated 1–3% of the formula.

Collagens, hydrolyzates. Substance obtained by acidic, alkaline, or enzymatic hydrolysis of hoofs and horns composed primarily of amino acids, peptides, and proteins. It may contain impurities consisting chiefly of carbohydrates and lipids along with smaller quantities of miscellaneous organic substances of biological origin.

Hydration

27th on the list, which puts it at an estimated 1–3% of the formula.

Octanoic acid, monoester with glycerol

Hydration

28th on the list, which puts it at an estimated 1–3% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration

29th on the list, which puts it at an estimated 1–3% of the formula.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration

31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Propanediol, 3-(2-ethylhexyloxy)

Hydration

Formula analysis

Each axis is scored from the ingredients present and how high up the list they sit.

Hydration High

Ingredients that pull and hold water in the upper layers of skin

Barrier support None

Lipids and repair signals that support skin barrier integrity

Antioxidant support None

Ingredients that mop up free radicals from UV and pollution

Oil control Moderate

Ingredients that moderate sebum or absorb shine

Brightening None

Ingredients that act on uneven tone and post-inflammatory marks

Soothing Moderate

Ingredients aimed at visible redness and reactivity

Cell renewal None

Retinoids, acids and enzymes that speed surface turnover

Firmness signalling None

Peptides and growth factors that signal for collagen support

Photostability Very high

Every filter in this formula is photostable

Active and supporting ingredients

"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.

Active ingredients (2)

Supporting ingredients (29)

Solvents, emollients, texture agents and preservatives — the formula that carries the actives.

Octyldodecanol Coco-caprylate/caprate Butylene Glycol Dicaprylate/dicaprate Acrylates Copolymer C12-15 Alkyl Benzoate Butyloctyl Salicylate Diphenylsiloxy Phenyl Trimethicone Synthetic Wax Dibutyl Lauroyl Glutamide Diisostearyl Malate Ceresin Dextrin Palmitate Dibutyl Ethylhexanoyl Glutamide Polymethylsilsesquioxane Polyhydroxystearic Acid Triethoxycaprylylsilane Camellia Japonica Seed Oil Butyrospermum Parkii Camellia Sinensis Leaf Water Hydrolyzed Collagen Acryloyl Dimethyl Taurate/melamine/peg-6 Methacrylate Crosspolymer Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone Caprylyl Glycol Glyceryl Caprylate Water Butylene Glycol 1,2-hexanediol Ethylhexylglycerin

What is and is not in it

Read from the full ingredient list. A brand's own claim may differ.

Free from

  • Fragrance-free
  • Essential-oil-free
  • No drying alcohol
  • Paraben-free
  • Sulfate-free
  • Dye-free
  • No animal-derived ingredients

Contains

  • Silicones

    Diphenylsiloxy Phenyl Trimethicone, Polymethylsilsesquioxane, Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer, Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone

  • Microplastics

    Polymethylsilsesquioxane, Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer

  • Facial oils

    Camellia Japonica Seed Oil

What to layer it with

Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.

Compatible with

  • Vitamin C (L-ascorbic acid)
  • Retinoids (retinol, retinal)
  • AHAs (glycolic, lactic)
  • BHA (salicylic acid)
  • PHAs (gluconolactone)
  • Benzoyl peroxide
  • Azelaic acid
  • Copper peptides
  • Bakuchiol
  • Niacinamide
  • Hyaluronic acid
  • Ceramides
  • Signal peptides
  • Panthenol
  • Sunscreen

Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.

Where it fits in a routine

Morning
  1. Cleanse
  2. Toning
  3. Treat
  4. Moisturise
  5. Protect

This product is the "Protect" step.

  • Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms.
  • Reapply every two hours of sun exposure, and after swimming or towelling off.
  • Let it set for a couple of minutes before makeup so it does not pill.

Safety and suitability

Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.

Pregnancy and breastfeeding
Nothing in this formula is on the standard pregnancy-caution list. That is not clearance — ask your doctor about anything you use daily.
Fungal acne (malassezia)
5 ingredients could feed malassezia: Butylene Glycol Dicaprylate/dicaprate, Dextrin Palmitate, Camellia Japonica Seed Oil, Butyrospermum Parkii, Glyceryl Caprylate. That is about the yeast's food supply, not a prediction that you will break out.
Sensitive and reactive skin
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Recorded ingredient risks
Microplastic, Silicone, Synthetic polymer

Ingredients by function

Most ingredients do more than one job, so these counts add up to more than the 31 ingredients on the label.

9
Emollient

Softens and smooths by filling gaps between skin cells

9
Texture agent

Sets the thickness, spread and stability of the formula

5
Solvent

Dissolves and carries everything else

4
Occlusive

Forms a film that slows water loss

4
Surfactant

Lifts oil and dirt, or holds oil and water together

3
Humectant

Draws water into the upper layers of skin

2
Preservative

Keeps the product free of microbial growth

1
Active

Changes how skin behaves rather than how it feels

1
Exfoliant

Loosens or dissolves dead surface cells

1
Plant extract

Botanical material, usually for antioxidants or scent

1
UV filter

Absorbs or scatters ultraviolet light

Ingredient breakdown

Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.

1 Zinc Oxide UV filter
Estimated level
10–25%
Confidence
High — bounded by a regulatory limit
Roles
UV filter, Occlusive, Texture agent, Preservative

1st on the list. Regulation caps it at 25%, so it is present at roughly 10–25%.

Zinc oxide (CI 77947)

Anti-Aging Soothing Oil Control
9 scientific references
  • Journal of Investigative Dermatology, February 2019, pages 277-278
  • Nanomaterials, March 2017, pages 27-31
  • Particle and Fibre Toxicology, August 2016, page 44
  • International Journal of Cosmetic Science, June 2014, pages 273-283
  • Indian Journal of Dermatology, September-October 2012, pages 335-342
  • Archives of Toxicology, July 2012, pages 1063-1075
  • Photodermatology, Photoimmunology, & Photomedicine, April 2011, pages 58-67
  • American Journal of Clinical Dermatology, December 2010, pages 413-421
  • https://cosmeticsinfoorg/ingredient/zinc-oxide-0?gclid=CjwKCAjw3_KIBhA2EiwAaAAlipF1YpJBfZrmUbDnK6jm68_2f-GfsdZ770fVI15BFzZJtiFcCJjAWxoC3SkQAvD_BwE
2 Octyldodecanol Emollient
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Solvent

2nd on the list, which puts it at an estimated 5–20% of the formula.

2-Octyldodecan-1-ol

Hydration
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

3rd on the list, which puts it at an estimated 5–20% of the formula.

Alcohols, coco, mixed esters with octanoic and decanoic acids

Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

4th on the list, which puts it at an estimated 2–10% of the formula.

1,2-Butanediol, diesters with octanoic and decanoic acids

Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Occlusive, Texture agent

5th on the list, which puts it at an estimated 2–10% of the formula.

2-propenoic acid, 2-methyl-, polymer with ethyl 2-propenoate and methyl 2-methyl-2-propenoate

Hydration Synthetic polymer
3 scientific references
  • CosmeticsInfoorg, Accessed October 2021, ePublication
  • Cosmetic Ingredient Review, January 2019, pages 1-42
  • Swiss Society of Chemists, September 2015, ePublication
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Preservative

6th on the list, which puts it at an estimated 2–10% of the formula.

Benzoic acid, C12-15 alkyl esters

Hydration
3 scientific references
  • The University of Toledo, May 2020, ePublication
  • Scientific Journal of the Faculty of Medicine in Nis, December 2013, pages 193-200
  • International Journal of Toxicology, November-December 2012, pages 342-372
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

7th on the list, which puts it at an estimated 1–5% of the formula.

Benzoic acid, 2-hydroxy-, 2-butyloctyl ester

Hydration
4 scientific references
  • Cosmetic Ingredient Review, June 2019, pages 1-60
  • https://onlinepersonalcarecouncilorg/ctfa-static/online/lists/cir-pdfs/FR766pdf
  • International Journal of Toxicology, 2003, pages 1-108
  • https://wwwdeepdyvecom/lp/sage/safety-assessment-of-salicylic-acid-butyloctyl-salicylate-calcium-klHNmxZGsR?articleList=%2Fsearch%3Fquery%3Dbutyloctyl%2Bsalicylate
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line

8th on the list, which puts it at an estimated 1–5% of the formula.

Silicones and siloxanes, diphenyl, trimethylsilyloxy phenyl, trimethylsilyl terminated

Silicone
9 Synthetic Wax Exfoliant
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Exfoliant, Texture agent

9th on the list, which puts it at an estimated 1–5% of the formula.

Synthetic Wax is a hydrocarbon wax derived generally through Fischer-Tropsch or ethylene polymerization processes.

Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Occlusive

10th on the list, which puts it at an estimated 1–5% of the formula.

(S)-N,N'-Dibutyl-2-[(1-oxododecyl)amino]glutaramide

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Surfactant

11th on the list, which puts it at an estimated 1–3% of the formula.

Bis(16-methylheptadecyl) malate

Hydration
8 scientific references
  • Supercharged Hydration
  • How Hyaluronic Acid Benefits Skin
  • What is Dehydrated Skin & How to Choose the Best Products
  • What Your Moisturizer Must Contain
  • Moisturizer Myths You Should Stop Believing Now
  • The Benefits of Glycerin in Skin Care
  • The Best Face Oils for Skin
  • How Facial Oils Help Skin
12 Ceresin Texture agent
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

12th on the list, which puts it at an estimated 1–3% of the formula.

Ceresin. A complex combination of hydrocarbons produced by the purification of ozocerite with sulfuric acid and filtration through bone black to form waxy cakes

13 Dextrin Palmitate Surfactant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant

13th on the list, which puts it at an estimated 1–3% of the formula.

Dextrin, Hexadecanoate

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line

14th on the list, which puts it at an estimated 1–3% of the formula.

Pentanediamide N,N'-Dibutyl-2-[(2-Ethyl-1-Oxohexyl)Amino]-

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

15th on the list, which puts it at an estimated 1–3% of the formula.

Polymer formed by hydrolysis and condensation of methyltrimethoxysilane

Microplastic
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant

16th on the list, which puts it at an estimated 1–3% of the formula.

12-Hydroxyoctadecanoic acid, homopolymer

17 Triethoxycaprylylsilane Texture agent
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

17th on the list, which puts it at an estimated 1–3% of the formula.

Silane, triethoxyoctyl-

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

18th on the list, which puts it at an estimated 1–3% of the formula.

Camellia Japonica Seed Oil is the fixed oil expressed from the seeds of the Camellia, Camellia japonica L., Theaceae

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line

19th on the list, which puts it at an estimated 1–3% of the formula.

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Plant extract

20th on the list, which puts it at an estimated 1–3% of the formula.

Camellia Sinensis Leaf Water is an aqueous solution of the odoriferous principles of the leaves of the Tea, Camellia sinensis, Theaceae

21 Hyaluronic Acid Humectant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Active

21st on the list, which puts it at an estimated 1–3% of the formula.

Hyaluronic acid

Anti-Aging Hydration
5 scientific references
  • Journal of Evidence-Based, Complementary and Alternative Medicine, October 2017, pages 816-823
  • Journal of Medicinal Food, October 2016, pages 1, 172-1, 179
  • Nutrition Journal, July 2013, ePublication
  • Journal of Drugs in Dermatology, 2011, issue 9, pages 990-1000
  • Journal of Clinical and Aesthetic Dermatology, March 2009, pages 38-43
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Emollient, Occlusive

22nd on the list, which puts it at an estimated 1–3% of the formula.

Collagens, hydrolyzates. Substance obtained by acidic, alkaline, or enzymatic hydrolysis of hoofs and horns composed primarily of amino acids, peptides, and proteins. It may contain impurities consisting chiefly of carbohydrates and lipids along with smaller quantities of miscellaneous organic substances of biological origin.

Hydration
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

23rd on the list, which puts it at an estimated 1–3% of the formula.

Acryloyl Dimethyl Taurate/Melamine/PEG-6 Methacrylate Crosspolymer is a complex, crosslinked polymer that is made by reacting melamine with Glutaral followed by the reaction with 2-Acrylamido-2-Methylpropane Sulfonic Acid and PEG-6 methacrylate. The resulting polymer is then further reacted with more melamine.

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

24th on the list, which puts it at an estimated 1–3% of the formula.

Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer

Silicone Microplastic
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line

25th on the list, which puts it at an estimated 1–3% of the formula.

Siloxanes and Silicones, 3-(tri(oxy-2-hydroxypropylene))oxypropyl methyl, 2-trimethylsilylpoly(oxydimethylsilyl)ethyl methyl, dimethyl

Silicone
26 Caprylyl Glycol Emollient
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

26th on the list, which puts it at an estimated 1–3% of the formula.

Octane-1,2-diol

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Surfactant

27th on the list, which puts it at an estimated 1–3% of the formula.

Octanoic acid, monoester with glycerol

Hydration
28 Water Solvent
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

28th on the list, which puts it at an estimated 1–3% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration
3 scientific references
  • Skin Research and Technology, May 2015, pages 131-136
  • Skin Pharmacology and Applied Skin Physiology, November-December 1999, pages 344-351
  • Journal of Cosmetic Science, September-October 1993, pages 249-262
29 Butylene Glycol Humectant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Texture agent, Solvent

29th on the list, which puts it at an estimated 1–3% of the formula.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration
5 scientific references
  • CosmeticsInfoorg, Accessed March 2021, ePublication
  • US Food and Drug Administration Code of Federal Regulations</em>, Accessed March 2021, ePublication
  • International Journal of Toxicology, May 2011, pages 5S-16S
  • Skin Research and Technology, November 2007, pages 417-24
  • Journal of the American College of Toxicology, September 1985, pages 223-248
30 1,2-hexanediol Solvent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Solvent

30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Propanediol, 3-(2-ethylhexyloxy)

Hydration
5 scientific references
  • PLoS One, October 2016, ePublication
  • Contact Dermatitis, May 2016, pages 281-288
  • International Journal of Toxicology, September 2013, pages 5S-21S
  • Personal Care, 2008, pages 1-4
  • Cosmetic Science Technology, 2006, pages 1-11

People also compare

Products in the same category that share this formula's distinguishing ingredients.

Cica-Hyal Sun Stick

MIXSOON

Shares 5 key ingredients with Inout Smooth Mineral Sun Stick SPF50 PA++++: Water, Butyloctyl Salicylate, Zinc Oxide, Butylene Glycol, Hyaluronic Acid

Mineral Sun Stick

Benton

Shares 4 key ingredients with Inout Smooth Mineral Sun Stick SPF50 PA++++: C12-15 Alkyl Benzoate, Glyceryl Caprylate, Water, Ethylhexylglycerin

Pore Smoothing Bakuchiol Sun Stick

By Wishtrend

Shares 3 key ingredients with Inout Smooth Mineral Sun Stick SPF50 PA++++: Butyloctyl Salicylate, Glyceryl Caprylate, Butylene Glycol

Frequently asked questions

What ingredients are in Inout Smooth Mineral Sun Stick SPF50 PA++++?

ZINC OXIDE, OCTYLDODECANOL, COCO-CAPRYLATE/CAPRATE, BUTYLENE GLYCOL DICAPRYLATE/DICAPRATE, ACRYLATES COPOLYMER, C12-15 ALKYL BENZOATE, BUTYLOCTYL SALICYLATE, DIPHENYLSILOXY PHENYL TRIMETHICONE, SYNTHETIC WAX, DIBUTYL LAUROYL GLUTAMIDE, DIISOSTEARYL MALATE, CERESIN, DEXTRIN PALMITATE, DIBUTYL ETHYLHEXANOYL GLUTAMIDE, POLYMETHYLSILSESQUIOXANE, POLYHYDROXYSTEARIC ACID, TRIETHOXYCAPRYLYLSILANE, CAMELLIA JAPONICA SEED OIL, Butyrospermum Parkii, CAMELLIA SINENSIS LEAF WATER, HYALURONIC ACID, HYDROLYZED COLLAGEN, ACRYLOYL DIMETHYL TAURATE/MELAMINE/PEG-6 METHACRYLATE CROSSPOLYMER, VINYL DIMETHICONE/METHICONE SILSESQUIOXANE CROSSPOLYMER, POLYGLYCERYL-3 POLYDIMETHYLSILOXYETHYL DIMETHICONE, CAPRYLYL GLYCOL, GLYCERYL CAPRYLATE, WATER, BUTYLENE GLYCOL, 1,2-HEXANEDIOL, ETHYLHEXYLGLYCERIN.

What are the active ingredients in Inout Smooth Mineral Sun Stick SPF50 PA++++?

HYALURONIC ACID.

How do I use Inout Smooth Mineral Sun Stick SPF50 PA++++?

Twist the bottom of the stick to expose the product. Apply evenly to the face and body, avoiding the eye area. Reapply every 2 hours or after swimming or sweating. Use as the final step in your morning skincare routine.

What skin types is Inout Smooth Mineral Sun Stick SPF50 PA++++ good for?

Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry), Combination (oily), Oily skin.

Is Inout Smooth Mineral Sun Stick SPF50 PA++++ good for sensitive skin?

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Is Inout Smooth Mineral Sun Stick SPF50 PA++++ fungal acne safe?

5 ingredients could feed malassezia: Butylene Glycol Dicaprylate/dicaprate, Dextrin Palmitate, Camellia Japonica Seed Oil, Butyrospermum Parkii, Glyceryl Caprylate. That describes the yeast's food supply, not a prediction that they will cause a breakout.

Can I use Inout Smooth Mineral Sun Stick SPF50 PA++++ while pregnant?

Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.

Is Inout Smooth Mineral Sun Stick SPF50 PA++++ fragrance free?

Yes. Reading the full ingredient list, this formula is fragrance-free.

Does Inout Smooth Mineral Sun Stick SPF50 PA++++ contain alcohol?

No. Reading the full ingredient list, this formula is no drying alcohol.

Is Inout Smooth Mineral Sun Stick SPF50 PA++++ silicone free?

No — it contains Diphenylsiloxy Phenyl Trimethicone, Polymethylsilsesquioxane, Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer, Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone.

Does Inout Smooth Mineral Sun Stick SPF50 PA++++ contain essential oils?

No. Reading the full ingredient list, this formula is essential-oil-free.

Is Inout Smooth Mineral Sun Stick SPF50 PA++++ paraben free?

Yes. Reading the full ingredient list, this formula is paraben-free.

What can I layer with Inout Smooth Mineral Sun Stick SPF50 PA++++?

It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.

When should I apply Inout Smooth Mineral Sun Stick SPF50 PA++++?

Use it in the morning, final morning step, before makeup.

How many ingredients does Inout Smooth Mineral Sun Stick SPF50 PA++++ have?

It lists 31 ingredients, of which 2 are recorded as actives.

Who makes Inout Smooth Mineral Sun Stick SPF50 PA++++?

Mizon.

What UV filters are in Inout Smooth Mineral Sun Stick SPF50 PA++++?

It filters UV with Zinc Oxide (zinc oxide).

Is Inout Smooth Mineral Sun Stick SPF50 PA++++ broad spectrum?

Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.

Does Inout Smooth Mineral Sun Stick SPF50 PA++++ leave a white cast?

Possibly. It filters with mineral UV filters, which sit on the surface and can leave a visible cast on deeper skin tones, especially at high SPF.

Is Inout Smooth Mineral Sun Stick SPF50 PA++++ reef safe?

It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.

Can I wear Inout Smooth Mineral Sun Stick SPF50 PA++++ under makeup?

Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.

How often should I reapply Inout Smooth Mineral Sun Stick SPF50 PA++++?

Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.

Brand
Mizon

Reviews

0 total

Log in to leave a review.

No reviews yet. Be the first to share your thoughts.