House of Hur Moist Ampoule Blusher

House of Hur

Moist Ampoule Blusher

face

Added Last edited

Fit by skin type

General, ingredient-based — not your personalized match.

Dry
67%
Combination (dry)
67%
Balanced
97%
Combination (oily)
73%
Oily
73%

See how this fits your skin

Take the skin test and I'll show you how suitable this product is for you.

Take the skin test
33
Ingredients
5
Benefits
2
Actives
Find Dupes

The House of Hur Moist Ampoule Blusher redefines the concept of blush with its lightweight and hydrating formula, akin to an essence, that effortlessly melds into the skin, imparting a watercolor-like pigmentation in a single stroke. Designed for all-day wear without any sticky residue, this blusher delivers a natural and radiant complexion.

Key Insights

Benefits

5
Anti-Aging
Evens Skin Tone
Hydration
Oil Control
Soothing

Active Ingredients

2
Hyaluronic acid Vitamin B5 (panthenol)

Risks

4
Alcohol
Microplastic
Silicone
Sulfate

About Moist Ampoule Blusher

Overview

Moist Ampoule Blusher is a cushioning skincare product from House of Hur. Its job is UV protection, with the rest of the formula working on hydration and soothing. The ingredient list runs to 33 ingredients, each broken down in full below.

Texture and finish

By its ingredient list the formula reads as moderately cushioned — emollient enough to feel like a cream, without the heaviest occlusives near the top. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Butylene Glycol, Glycerin and Sodium Hyaluronate, humectants that pull water into the upper layers of skin rather than sealing it there.

UV filter system

It is a mineral sunscreen, filtering with Titanium Dioxide. Between them those filters cover UVB and UVA II. They stop short of UVA I (340–400 nm), the deepest ageing wavelengths, so this is not a broad-spectrum filter system by the strictest reading. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.

What the formula does

Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Butylene Glycol, Glycerin, Sodium Hyaluronate and Ethylhexylglycerin.

Soothing: High. Ingredients aimed at visible redness and reactivity, and here that comes from Cetyl Ethylhexanoate, Isononyl Isononanoate, Panthenol and Chlorella Vulgaris Extract.

Who it suits

On richness alone it suits Balanced skin best, and is the least natural fit for Dry, Combination (dry), Combination (oily) and Oily skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.

What it does not target

The formula contributes little or nothing on barrier support, antioxidant protection, oil control and brightening and tone. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.

What is not in it

Reading the full list, the formula is fragrance-free, essential-oil-free, paraben-free, sulfate-free, oil-free and no animal-derived ingredients. Those claims come from the ingredient list itself, not from the packaging. It does contain drying alcohol, worth knowing if your skin reacts to any of them.

Where it fits in a routine

It can be used morning and evening. In a routine it goes after serums. Seal in your serums with it; in the morning, sunscreen still goes on top. It carries UV filters, so it belongs in your morning routine.

This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.

Pros and cons

Drawn purely from the ingredient list

Pros

  • Every UV filter in it is photostable
  • No fragrance or declared allergens
  • No essential oils
  • Strong humectant content for hydration
  • Several soothing ingredients
  • No common irritants flagged in the list
  • No recognised malassezia (fungal acne) triggers

Things to know

  • Filter system does not reach UVA I
  • Contains drying alcohol high in the list
  • Contains a solid synthetic polymer (microplastic)

Which skin types it suits

Scored on how rich or light the formula reads from its INCI order.

Suitable for

  • Balanced skin

Less suitable for

  • Dry skin
  • Combination (dry) skin
  • Combination (oily) skin
  • Oily skin

Sensitive skin

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Skin concerns

Based on the curated benefits documented for this product's ingredients.

Helps with

  • Hydration 15 ingredients

    Attracts and locks in moisture to keep skin plump and dewy

  • Anti-Aging 4 ingredients

    Boosts collagen and cell turnover to reduce fine lines and wrinkles

  • Soothing 4 ingredients

    Calms redness, irritation, and inflammation for sensitive skin

  • Evens Skin Tone 1 ingredient

    Brightens and balances complexion for a more uniform appearance

  • Oil Control 1 ingredient

    Regulates sebum production to reduce shine and greasiness

Does not target

Anti-Acne Blackhead Reducing Dark Spot Fading Pore Minimizer Smooths Bumpy Skin

None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.

UV filters

Mineral filter system · does not reach UVA I

Titanium Dioxide

titanium dioxide
Protects from
UVB (290–320 nm), UVA II (320–340 nm)
Photostable
Yes — photostable
Generation
Mineral (inorganic) filter
Approved in
Approved worldwide
Maximum permitted level
Up to 25% (EU, US, KR)

Strong UVB and short-UVA protection, but it stops before UVA I — a mineral formula leaning on titanium dioxide alone needs zinc oxide beside it for deep UVA.

Key ingredients

The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.

1st on the list, which puts it at an estimated 10–40% of the formula.

1,1,1,3,5,5,5-Heptamethyl-3-(trimethylsilyloxy)trisiloxane

Hydration

2nd on the list, which puts it at an estimated 5–20% of the formula.

Dimethicone

Hydration

3rd on the list, which puts it at an estimated 5–20% of the formula.

Hexadecyl 2-ethylhexanoate

Hydration

7th on the list, which puts it at an estimated 1–5% of the formula.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration

8th on the list, which puts it at an estimated 1–5% of the formula.

Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane

Hydration Anti-Aging

9th on the list, which puts it at an estimated 1–5% of the formula.

SilIcones and siloxanes, dimethyl, hydropoly(oxy-1,2-ethanediyl methyl, trimethylsilyl terminated (10 mol EO average molar ratio)

Hydration

10th on the list, which puts it at an estimated 1–5% of the formula.

1,2-Dihydroxypentane

Hydration

13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Chlorella Vulgaris Extract is an extract of the Alga, Chlorella vulgaris, Oocystaceae

Soothing Hydration
Sodium Hyaluronate Hyaluronic acid

15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Hyaluronic acid, sodium, salt

Hydration Anti-Aging Soothing

18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Hexanedioic acid, 3-(2,3-dihydroxypropyloxy)-2-hydroxypropyl diester, esters from reaction with a mixture of octanoic, decanoic, isooctadecanoic, octadecanoic and 12-hydroxyoctadecanoic acids

Hydration

20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Glucose

Hydration

21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Fructooligosaccharides are oligosaccharides produced enzymatically from sugar beets and consist chiefly of kestose, nystose and fructosyl nystose

Hydration

Formula analysis

Each axis is scored from the ingredients present and how high up the list they sit.

Hydration High

Ingredients that pull and hold water in the upper layers of skin

Barrier support None

Lipids and repair signals that support skin barrier integrity

Antioxidant support None

Ingredients that mop up free radicals from UV and pollution

Oil control None

Ingredients that moderate sebum or absorb shine

Brightening None

Ingredients that act on uneven tone and post-inflammatory marks

Soothing High

Ingredients aimed at visible redness and reactivity

Cell renewal None

Retinoids, acids and enzymes that speed surface turnover

Firmness signalling None

Peptides and growth factors that signal for collagen support

Photostability Very high

Every filter in this formula is photostable

Active and supporting ingredients

"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.

Active ingredients (3)

Supporting ingredients (30)

Solvents, emollients, texture agents and preservatives — the formula that carries the actives.

Methyl Trimethicone Dimethicone Cetyl Ethylhexanoate Isononyl Isononanoate Alcohol Denat. Polypropylsilsesquioxane Butylene Glycol Glycerin Peg-10 Dimethicone Pentylene Glycol Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer 1,2-hexanediol Chlorella Vulgaris Extract Prunus Armeniaca Fruit Extract Disteardimonium Hectorite Magnesium Sulfate Bis-diglyceryl Polyacyladipate-2 Cetyl Peg/ppg-10/1 Dimethicone Glucose Fructooligosaccharides Fructose Ethylhexylglycerin Trisodium Ethylenediamine Disuccinate Triethoxycaprylylsilane Aluminum Hydroxide Pentaerythrityl Tetra-di-t-butyl Hydroxyhydrocinnamate Tocopherol Iron Powder Mica Ultramarines

What is and is not in it

Read from the full ingredient list. A brand's own claim may differ.

Free from

  • Fragrance-free
  • Essential-oil-free
  • Paraben-free
  • Sulfate-free
  • Oil-free
  • No animal-derived ingredients

Contains

  • Drying alcohol

    Alcohol Denat.

  • Silicones

    Methyl Trimethicone, Dimethicone, Polypropylsilsesquioxane, Peg-10 Dimethicone, Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer

  • Microplastics

    Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer

  • Added colour

    Mica

What to layer it with

Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.

Compatible with

  • Vitamin C (L-ascorbic acid)
  • Retinoids (retinol, retinal)
  • AHAs (glycolic, lactic)
  • BHA (salicylic acid)
  • PHAs (gluconolactone)
  • Benzoyl peroxide
  • Azelaic acid
  • Copper peptides
  • Bakuchiol
  • Niacinamide
  • Hyaluronic acid
  • Ceramides
  • Signal peptides
  • Panthenol
  • Sunscreen

Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.

Where it fits in a routine

Morning Evening
  1. Cleanse
  2. Toning
  3. Treat
  4. Moisturise
  5. Protect

This product is the "Moisturise" step.

  • Seal in your serums with it; in the morning, sunscreen still goes on top.
  • It carries UV filters, so it belongs in your morning routine.

Safety and suitability

Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.

Pregnancy and breastfeeding
Nothing in this formula is on the standard pregnancy-caution list. That is not clearance — ask your doctor about anything you use daily.
Fungal acne (malassezia)
No ingredient here is a recognised food source for malassezia.
Sensitive and reactive skin
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Recorded ingredient risks
Alcohol, Microplastic, Silicone, Sulfate

Ingredients by function

Most ingredients do more than one job, so these counts add up to more than the 33 ingredients on the label.

11
Texture agent

Sets the thickness, spread and stability of the formula

7
Humectant

Draws water into the upper layers of skin

6
Solvent

Dissolves and carries everything else

5
Emollient

Softens and smooths by filling gaps between skin cells

4
Occlusive

Forms a film that slows water loss

2
Active

Changes how skin behaves rather than how it feels

2
Antioxidant

Neutralises free radicals from UV and pollution

2
Plant extract

Botanical material, usually for antioxidants or scent

1
Fragrance / colour

Changes how the product smells or looks

1
Chelator

Binds trace metals that would otherwise spoil the formula

1
Preservative

Keeps the product free of microbial growth

1
Surfactant

Lifts oil and dirt, or holds oil and water together

1
UV filter

Absorbs or scatters ultraviolet light

Ingredient breakdown

Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.

Estimated level
10–40%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

1st on the list, which puts it at an estimated 10–40% of the formula.

1,1,1,3,5,5,5-Heptamethyl-3-(trimethylsilyloxy)trisiloxane

Hydration Silicone
8 scientific references
  • Supercharged Hydration
  • How Hyaluronic Acid Benefits Skin
  • What is Dehydrated Skin & How to Choose the Best Products
  • What Your Moisturizer Must Contain
  • Moisturizer Myths You Should Stop Believing Now
  • The Benefits of Glycerin in Skin Care
  • The Best Face Oils for Skin
  • How Facial Oils Help Skin
2 Dimethicone Emollient
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Occlusive

2nd on the list, which puts it at an estimated 5–20% of the formula.

Dimethicone

Hydration Silicone
7 scientific references
  • FDA Code of Federal Regulations, April 2020, ePublication
  • International Journal of Toxicology, May 2014, pages 65S-115S
  • The Journal of Clinical and Aesthetic Dermatology, May 2014, pages 36-44
  • Dermatologic Therapy, May 2012, pages 229-233
  • Clinics in Dermatology, May-June 2012, pages 345-348
  • International Journal of Cosmetic Science, January 2008, pages 19-33
  • Skin Research and Technology, May 2000, pages 77-80
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

3rd on the list, which puts it at an estimated 5–20% of the formula.

Hexadecyl 2-ethylhexanoate

Hydration
2 scientific references
  • Engineering in Life Sciences, March 2019, pages 370-388
  • International Journal of Toxicology, Nov-Dec 2015, pages 61S-73S
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

4th on the list, which puts it at an estimated 2–10% of the formula.

3,5,5-Trimethylhexyl 3,5,5-trimethylhexanoate

5 Alcohol Denat. Texture agent
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent, Solvent, Preservative

5th on the list, which puts it at an estimated 2–10% of the formula.

Alcohol Denat. is ethyl alcohol that is denatured with one or more denaturing agents in accordance with the national legislation of each European Community (EU) country.

Alcohol
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Occlusive

6th on the list, which puts it at an estimated 2–10% of the formula.

Polymer formed by hydrolysis and condensation of propyltrichlorosilane

7 Butylene Glycol Humectant
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Texture agent, Solvent

7th on the list, which puts it at an estimated 1–5% of the formula.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration
5 scientific references
  • CosmeticsInfoorg, Accessed March 2021, ePublication
  • US Food and Drug Administration Code of Federal Regulations</em>, Accessed March 2021, ePublication
  • International Journal of Toxicology, May 2011, pages 5S-16S
  • Skin Research and Technology, November 2007, pages 417-24
  • Journal of the American College of Toxicology, September 1985, pages 223-248
8 Glycerin Humectant
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Occlusive, Texture agent, Solvent

8th on the list, which puts it at an estimated 1–5% of the formula.

Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane

Hydration Anti-Aging
6 scientific references
  • Journal of Pharmaceutical Investigation, March 2021, pages 223-231
  • International Journal of Toxicology, November/December 2019, Volume 38, Supplement 3, pages 6S-22S
  • International Journal of Cosmetic Science, August 2016, ePublication
  • British Journal of Dermatology, July 2008, pages 23-34
  • Journal of Cosmetic Dermatology, June 2007, pages 75-82
  • Proceedings of the National Academy of Sciences, June 2003, pages 7, 360-7, 365
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line

9th on the list, which puts it at an estimated 1–5% of the formula.

SilIcones and siloxanes, dimethyl, hydropoly(oxy-1,2-ethanediyl methyl, trimethylsilyl terminated (10 mol EO average molar ratio)

Hydration Silicone
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

10th on the list, which puts it at an estimated 1–5% of the formula.

1,2-Dihydroxypentane

Hydration
4 scientific references
  • https://thedermreviewcom/pentylene-glycol/
  • Regulatory Toxicology and Pharmacology, July 2017, pages 106-111
  • Prospector, June 2015, ePublication
  • International Journal of Toxicology, October 2012, pages 147S-168S
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

11th on the list, which puts it at an estimated 1–3% of the formula.

Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer

Silicone Microplastic
12 1,2-hexanediol Solvent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Solvent

12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Chlorella Vulgaris Extract is an extract of the Alga, Chlorella vulgaris, Oocystaceae

Soothing Hydration
3 scientific references
  • Marine Drugs, August 2021, pages 1-16
  • IOP Conference Series: Materials Science and Engineering, January 2021, pages 1-9
  • Journal of Applied Phycology, June 2019, pages 3, 653-3, 663
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Prunus Armeniaca Fruit Extract is an extract of the fruits of the Apricot, Prunus armeniaca L., Rosaceae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Active

15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Hyaluronic acid, sodium, salt

Hydration Anti-Aging Soothing
5 scientific references
  • Der Hautarzt; Zeitschrift fur Dermatologie, Venerologie, und Verwandte Gebiete, December 2017, pages 987-993
  • Journal of Cosmetic Dermatology, July 2014, pages 277-287
  • Journal of Clinical and Aesthetic Dermatology, October 2012, pages 20-23
  • DermatoEndocrinology, July-December 2012, pages 253-258
  • Journal of Drugs in Dermatology, September 2011, pages 990-1000
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1-Octadecanaminium, N,N-dimethyl-N-octadecyl-, chloride, reaction products with hectorite

17 Magnesium Sulfate Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Magnesium sulphate

Sulfate
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient

18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Hexanedioic acid, 3-(2,3-dihydroxypropyloxy)-2-hydroxypropyl diester, esters from reaction with a mixture of octanoic, decanoic, isooctadecanoic, octadecanoic and 12-hydroxyoctadecanoic acids

Hydration
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Surfactant

19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Cetyl PEG/PPG-10/1 Dimethicone is the copolymer of Cetyl Dimethicone and an alkoxylated derivative of Dimethicone containing an average of 10 moles of ethylene oxide and 1 mole of propylene oxide

Silicone
20 Glucose Humectant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant

20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Glucose

Hydration
4 scientific references
  • International Journal of Molecular Sciences, March 2020, pages 1–13
  • Foods, March 2019, pages 1–27
  • Nature Medicine, May 2018, pages 617–627
  • Clinical Chemistry and Laboratory Medicine, September 2003, pages 1, 224–1, 228
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant

21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Fructooligosaccharides are oligosaccharides produced enzymatically from sugar beets and consist chiefly of kestose, nystose and fructosyl nystose

Hydration
22 Fructose Humectant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant

22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Fructose

Hydration
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Propanediol, 3-(2-ethylhexyloxy)

Hydration
5 scientific references
  • PLoS One, October 2016, ePublication
  • Contact Dermatitis, May 2016, pages 281-288
  • International Journal of Toxicology, September 2013, pages 5S-21S
  • Personal Care, 2008, pages 1-4
  • Cosmetic Science Technology, 2006, pages 1-11
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Chelator

24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

L-Aspartic acid, N,N'-1,2-ethanediylbis-, trisodium salt

25 Triethoxycaprylylsilane Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Silane, triethoxyoctyl-

26 Panthenol Active
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Active

26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol

Hydration Soothing
7 scientific references
  • The Linus Pauling Institute, Oregon State University, Accessed April 2021, ePublication
  • International Journal of Cosmetic Science, December 2019, pages 534-547
  • Journal of Cosmetic Dermatology, January 2019, pages 346-354
  • Cosmetic Ingredient Review, March 2018, pages 1-51
  • The Journal of Dermatological Treatment, August 2017, pages 173-180
  • Journal of Cosmetic Science, August 2011, pages 361-370
  • American Journal of Clinical Dermatology, Volume 3, 2002, pages 427-433
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Emollient, Occlusive, Texture agent

27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Aluminium hydroxide

Oil Control
8 scientific references
  • Oil-Absorbing Ingredients
  • Help for Oily Skin
  • Salicylic Acid for Skin
  • How BHA Exfoliants Work
  • Which BHA Exfoliant is Right for Me?
  • Niacinamide Benefits: What Does Niacinamide Do for Skin?
  • The Best Toners for Oily Skin
  • The Best Moisturizers for Oily, Acne-Prone Skin
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Antioxidant

28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-, 2,2-bis[[3-[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy] methyl]-1,3-propanediyl ester

29 Tocopherol Antioxidant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Antioxidant

29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E

Anti-Aging Evens Skin Tone Soothing
4 scientific references
  • Journal or Agricultural and Food Chemistry, June 2010, pages 7013-7020
  • Journal of Investigative Dermatology, November 2001, pages 1212-1217
  • Canadian Family Physician, July 2006, pages 855-856
  • Dermatologic Surgery, April 1999, pages 311-315
30 Titanium Dioxide UV filter
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
UV filter, Texture agent

30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Titanium dioxide (CI 77891)

Anti-Aging
10 scientific references
  • Journal of Cosmetic Dermatology, February 2021, pages 532-537
  • Frontiers in Bioengineering and Biotechnology, June 2020
  • Journal of Nanoparticle Research, March 2020
  • Journal of the European Academy of Dermatology and Venereology, November 2019, pages 34-46
  • Photodermatology, Photoimmunology and Photomedicine, November 2019, pages 442-446
  • Journal of Cosmetic Science, September 2019, pages 223-234
  • Materials, July 2019, pages 1-24
  • Photodermatology, Photoimmunology, and Photomedicine, April 2011, pages 58-67
  • Skin Therapy Letter, July-August 2008, pages 5-7
  • Environmental and Health Perspectives, July 2008, pages 893
31 Iron Powder Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Iron Powder is the element consisting of powdered metallic iron

32 Mica Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent, Fragrance / colour

32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Mica is a series of silicate minerals of varying chemical composition but with similar physical properties. Mica may have well-defined cleavage and split into very thin sheets.

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Ultramarines (blue, green, pink, red and violet) are synthetic pigments composed of complex sodium aluminum sulfosilicates having a typical formula Na(AlSiO)S with proportions of each element varying with each colour. To identify the colorant allowed for use in the European Union (EU), the INCI Name CI 77007 must be used.

Frequently asked questions

What ingredients are in Moist Ampoule Blusher?

METHYL TRIMETHICONE, DIMETHICONE, CETYL ETHYLHEXANOATE, ISONONYL ISONONANOATE, ALCOHOL DENAT., POLYPROPYLSILSESQUIOXANE, BUTYLENE GLYCOL, GLYCERIN, PEG-10 DIMETHICONE, PENTYLENE GLYCOL, VINYL DIMETHICONE/METHICONE SILSESQUIOXANE CROSSPOLYMER, 1,2-HEXANEDIOL, CHLORELLA VULGARIS EXTRACT, PRUNUS ARMENIACA FRUIT EXTRACT, SODIUM HYALURONATE, DISTEARDIMONIUM HECTORITE, MAGNESIUM SULFATE, BIS-DIGLYCERYL POLYACYLADIPATE-2, CETYL PEG/PPG-10/1 DIMETHICONE, GLUCOSE, FRUCTOOLIGOSACCHARIDES, FRUCTOSE, ETHYLHEXYLGLYCERIN, TRISODIUM ETHYLENEDIAMINE DISUCCINATE, TRIETHOXYCAPRYLYLSILANE, PANTHENOL, ALUMINUM HYDROXIDE, PENTAERYTHRITYL TETRA-DI-T-BUTYL HYDROXYHYDROCINNAMATE, TOCOPHEROL, TITANIUM DIOXIDE, IRON POWDER, MICA, ULTRAMARINES.

What are the active ingredients in Moist Ampoule Blusher?

SODIUM HYALURONATE, PANTHENOL.

How do I use Moist Ampoule Blusher?

Apply a small amount 1-2 times and layer as needed. You can freely adjust the concentration, making various makeup expressions possible. The more you layer it, the more luminous the glow you will achieve.

What skin types is Moist Ampoule Blusher good for?

Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry), Combination (oily), Oily skin.

Is Moist Ampoule Blusher good for sensitive skin?

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Is Moist Ampoule Blusher fungal acne safe?

No ingredient in this formula is a recognised food source for malassezia, the yeast behind fungal acne.

Can I use Moist Ampoule Blusher while pregnant?

Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.

Is Moist Ampoule Blusher fragrance free?

Yes. Reading the full ingredient list, this formula is fragrance-free.

Does Moist Ampoule Blusher contain alcohol?

Yes — it contains Alcohol Denat..

Is Moist Ampoule Blusher silicone free?

No — it contains Methyl Trimethicone, Dimethicone, Polypropylsilsesquioxane, Peg-10 Dimethicone, Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer.

Does Moist Ampoule Blusher contain essential oils?

No. Reading the full ingredient list, this formula is essential-oil-free.

Is Moist Ampoule Blusher paraben free?

Yes. Reading the full ingredient list, this formula is paraben-free.

What can I layer with Moist Ampoule Blusher?

It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.

When should I apply Moist Ampoule Blusher?

Use it morning and evening, after serums.

How many ingredients does Moist Ampoule Blusher have?

It lists 33 ingredients, of which 3 are recorded as actives.

Who makes Moist Ampoule Blusher?

House of Hur.

What UV filters are in Moist Ampoule Blusher?

It filters UV with Titanium Dioxide (titanium dioxide).

Is Moist Ampoule Blusher broad spectrum?

Not in the strictest sense. Its filters stop short of UVA I (340–400 nm), the deepest ageing wavelengths.

Does Moist Ampoule Blusher leave a white cast?

Possibly. It filters with mineral UV filters, which sit on the surface and can leave a visible cast on deeper skin tones, especially at high SPF.

Is Moist Ampoule Blusher reef safe?

It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.

Can I wear Moist Ampoule Blusher under makeup?

Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.

How often should I reapply Moist Ampoule Blusher?

Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.

Brand
House of Hur

Reviews

0 total

Log in to leave a review.

No reviews yet. Be the first to share your thoughts.