House of Hur
Moist Ampoule Blusher
face
House of Hur
face
Added Last edited
Shade
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testThe House of Hur Moist Ampoule Blusher redefines the concept of blush with its lightweight and hydrating formula, akin to an essence, that effortlessly melds into the skin, imparting a watercolor-like pigmentation in a single stroke. Designed for all-day wear without any sticky residue, this blusher delivers a natural and radiant complexion.
Moist Ampoule Blusher is a lightweight skincare product from House of Hur. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 35 ingredients, each broken down in full below.
By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Butylene Glycol, Glycerin and Panthenol, humectants that pull water into the upper layers of skin rather than sealing it there.
It is a mineral sunscreen, filtering with Titanium Dioxide. Between them those filters cover UVB and UVA II. They stop short of UVA I (340–400 nm), the deepest ageing wavelengths, so this is not a broad-spectrum filter system by the strictest reading. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.
Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Butylene Glycol, Glycerin, Panthenol and Sodium Hyaluronate.
Soothing: Moderate. Ingredients aimed at visible redness and reactivity, and here that comes from Cetyl Ethylhexanoate, Isononyl Isononanoate, Panthenol and Sodium Hyaluronate.
On richness alone it suits Balanced skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on barrier support, antioxidant protection, oil control and brightening and tone. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is fragrance-free, essential-oil-free, paraben-free, sulfate-free, oil-free and no animal-derived ingredients. Those claims come from the ingredient list itself, not from the packaging. It does contain drying alcohol, worth knowing if your skin reacts to any of them.
It can be used morning and evening. In a routine it goes after serums. Seal in your serums with it; in the morning, sunscreen still goes on top. It carries UV filters, so it belongs in your morning routine.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Calms redness, irritation, and inflammation for sensitive skin
Brightens and balances complexion for a more uniform appearance
Regulates sebum production to reduce shine and greasiness
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
Mineral filter system · does not reach UVA I
Strong UVB and short-UVA protection, but it stops before UVA I — a mineral formula leaning on titanium dioxide alone needs zinc oxide beside it for deep UVA.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
1,1,1,3,5,5,5-Heptamethyl-3-(trimethylsilyloxy)trisiloxane
3rd on the list, which puts it at an estimated 5–20% of the formula.
Dimethicone
4th on the list, which puts it at an estimated 2–10% of the formula.
Hexadecyl 2-ethylhexanoate
9th on the list, which puts it at an estimated 1–5% of the formula.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
10th on the list, which puts it at an estimated 1–5% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
11th on the list, which puts it at an estimated 1–3% of the formula.
SilIcones and siloxanes, dimethyl, hydropoly(oxy-1,2-ethanediyl methyl, trimethylsilyl terminated (10 mol EO average molar ratio)
12th on the list, which puts it at an estimated 1–3% of the formula.
1,2-Dihydroxypentane
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium, salt
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Chlorella Vulgaris Extract is an extract of the Alga, Chlorella vulgaris, Oocystaceae
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
Every filter in this formula is photostable
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Alcohol Denat.
Methyl Trimethicone, Dimethicone, Polypropylsilsesquioxane, Peg-10 Dimethicone, Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer
Polybutene, Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer
Mica
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.
This product is the "Moisturise" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 35 ingredients on the label.
Sets the thickness, spread and stability of the formula
Draws water into the upper layers of skin
Dissolves and carries everything else
Softens and smooths by filling gaps between skin cells
Forms a film that slows water loss
Changes how skin behaves rather than how it feels
Neutralises free radicals from UV and pollution
Botanical material, usually for antioxidants or scent
Changes how the product smells or looks
Binds trace metals that would otherwise spoil the formula
Loosens or dissolves dead surface cells
Keeps the product free of microbial growth
Lifts oil and dirt, or holds oil and water together
Absorbs or scatters ultraviolet light
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
1,1,1,3,5,5,5-Heptamethyl-3-(trimethylsilyloxy)trisiloxane
3rd on the list, which puts it at an estimated 5–20% of the formula.
Dimethicone
4th on the list, which puts it at an estimated 2–10% of the formula.
Hexadecyl 2-ethylhexanoate
5th on the list, which puts it at an estimated 2–10% of the formula.
3,5,5-Trimethylhexyl 3,5,5-trimethylhexanoate
6th on the list, which puts it at an estimated 2–10% of the formula.
Alcohol Denat. is ethyl alcohol that is denatured with one or more denaturing agents in accordance with the national legislation of each European Community (EU) country.
7th on the list, which puts it at an estimated 1–5% of the formula.
Polybutene is the polymer formed by the polymerization of a mixture of iso- and normal butenes.
8th on the list, which puts it at an estimated 1–5% of the formula.
Polymer formed by hydrolysis and condensation of propyltrichlorosilane
9th on the list, which puts it at an estimated 1–5% of the formula.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
10th on the list, which puts it at an estimated 1–5% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
11th on the list, which puts it at an estimated 1–3% of the formula.
SilIcones and siloxanes, dimethyl, hydropoly(oxy-1,2-ethanediyl methyl, trimethylsilyl terminated (10 mol EO average molar ratio)
12th on the list, which puts it at an estimated 1–3% of the formula.
1,2-Dihydroxypentane
13th on the list, which puts it at an estimated 1–3% of the formula.
Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Prunus Persica Fruit Extract is an extract of the fruit of the Peach, Prunus persica, Rosaceae
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium, salt
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Chlorella Vulgaris Extract is an extract of the Alga, Chlorella vulgaris, Oocystaceae
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Aluminium hydroxide
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Glucose
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-, 2,2-bis[[3-[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy] methyl]-1,3-propanediyl ester
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Fructooligosaccharides are oligosaccharides produced enzymatically from sugar beets and consist chiefly of kestose, nystose and fructosyl nystose
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Fructose
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
L-Aspartic acid, N,N'-1,2-ethanediylbis-, trisodium salt
27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Silane, triethoxyoctyl-
28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1-Octadecanaminium, N,N-dimethyl-N-octadecyl-, chloride, reaction products with hectorite
29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Magnesium sulphate
30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hexanedioic acid, 3-(2,3-dihydroxypropyloxy)-2-hydroxypropyl diester, esters from reaction with a mixture of octanoic, decanoic, isooctadecanoic, octadecanoic and 12-hydroxyoctadecanoic acids
31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Cetyl PEG/PPG-10/1 Dimethicone is the copolymer of Cetyl Dimethicone and an alkoxylated derivative of Dimethicone containing an average of 10 moles of ethylene oxide and 1 mole of propylene oxide
32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Mica is a series of silicate minerals of varying chemical composition but with similar physical properties. Mica may have well-defined cleavage and split into very thin sheets.
33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3',6'-Dihydroxy-4',5'-diiodospiro[isobenzofuran-1(3H),9'-[9H]xanthene]-3-one (CI 45425)
34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Iron Powder is the element consisting of powdered metallic iron
35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Titanium dioxide (CI 77891)
WATER, METHYL TRIMETHICONE, DIMETHICONE, CETYL ETHYLHEXANOATE, ISONONYL ISONONANOATE, ALCOHOL DENAT., POLYBUTENE, POLYPROPYLSILSESQUIOXANE, BUTYLENE GLYCOL, GLYCERIN, PEG-10 DIMETHICONE, PENTYLENE GLYCOL, VINYL DIMETHICONE/METHICONE SILSESQUIOXANE CROSSPOLYMER, 1,2-HEXANEDIOL, PRUNUS PERSICA FRUIT EXTRACT, PANTHENOL, SODIUM HYALURONATE, CHLORELLA VULGARIS EXTRACT, TOCOPHEROL, ALUMINUM HYDROXIDE, GLUCOSE, PENTAERYTHRITYL TETRA-DI-T-BUTYL HYDROXYHYDROCINNAMATE, FRUCTOOLIGOSACCHARIDES, FRUCTOSE, ETHYLHEXYLGLYCERIN, TRISODIUM ETHYLENEDIAMINE DISUCCINATE, TRIETHOXYCAPRYLYLSILANE, DISTEARDIMONIUM HECTORITE, MAGNESIUM SULFATE, BIS-DIGLYCERYL POLYACYLADIPATE-2, CETYL PEG/PPG-10/1 DIMETHICONE, MICA, SOLVENT RED 73, IRON POWDER, TITANIUM DIOXIDE.
PANTHENOL, SODIUM HYALURONATE.
Apply a small amount 1-2 times and layer as needed. You can freely adjust the concentration, making various makeup expressions possible. The more you layer it, the more luminous the glow you will achieve.
Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry) skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
No ingredient in this formula is a recognised food source for malassezia, the yeast behind fungal acne.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
Yes. Reading the full ingredient list, this formula is fragrance-free.
Yes — it contains Alcohol Denat..
No — it contains Methyl Trimethicone, Dimethicone, Polypropylsilsesquioxane, Peg-10 Dimethicone, Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.
Use it morning and evening, after serums.
It lists 35 ingredients, of which 3 are recorded as actives.
House of Hur.
It filters UV with Titanium Dioxide (titanium dioxide).
Not in the strictest sense. Its filters stop short of UVA I (340–400 nm), the deepest ageing wavelengths.
Possibly. It filters with mineral UV filters, which sit on the surface and can leave a visible cast on deeper skin tones, especially at high SPF.
It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.
Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.
Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect