House of Hur
Weightless Sun Fluid
face body sunscreen
House of Hur
face body sunscreen
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testThe House of Hur Weightless Sun Fluid offers a creamy yet refreshing solution to sun protection. With a potent blend of 26% Jeju yuja extract and 19% pure New Zealand honey extract, this sunscreen provides effective benefits while maintaining a lightweight feel on the skin. Protecting your skin from prolonged UV exposure is crucial in preventing wrinkles, fine lines, and premature aging.
Weightless Sun Fluid is a lightweight sunscreen from House of Hur. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 26 ingredients, each broken down in full below.
By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Butylene Glycol, Methylpropanediol and Ethylhexylglycerin, humectants that pull water into the upper layers of skin rather than sealing it there.
It is a chemical (organic-filter) sunscreen, using Uvinul T 150, Mexoryl SX, Uvinul A Plus, Parsol SLX and Tinosorb S. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.
Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Butylene Glycol, Methylpropanediol, Ethylhexylglycerin and Water.
Soothing: Moderate. Ingredients aimed at visible redness and reactivity, and here that comes from Diethylamino Hydroxybenzoyl Hexyl Benzoate and Honey Extract.
On richness alone it suits Balanced skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on barrier support, antioxidant protection, brightening and tone and cell renewal. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is fragrance-free, essential-oil-free, no drying alcohol, paraben-free, microplastic-free and sulfate-free. Those claims come from the ingredient list itself, not from the packaging.
Use it in the morning. In a routine it goes final morning step, before makeup. Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms. Reapply every two hours of sun exposure, and after swimming or towelling off. Let it set for a couple of minutes before makeup so it does not pill.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Regulates sebum production to reduce shine and greasiness
Calms redness, irritation, and inflammation for sensitive skin
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
Chemical (organic) filter system · broad-spectrum through UVA I
The most efficient UVB absorber available by weight, which is why high-SPF formulas reach SPF 50+ without feeling heavy. Contributes nothing to UVA.
Water-soluble UVA filter, which is unusual — most UVA filters are oil-soluble.
A photostable replacement for avobenzone: it peaks at 354 nm, deep in UVA I, and does not need a stabiliser to survive the day.
A polymer, so it stays on the surface of skin rather than penetrating — low irritation potential and no measurable systemic absorption.
One of the most photostable filters in use, and it stabilises avobenzone and octinoxate alongside it. Oil-soluble, cosmetically light, no white cast.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
2nd on the list, which puts it at an estimated 5–20% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
3rd on the list, which puts it at an estimated 5–20% of the formula.
Mel Extract (EU)
4th on the list, which puts it at an estimated 2–10% of the formula.
Dibutyl adipate
5th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.
Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone
6th on the list, which puts it at an estimated 2–10% of the formula.
3,3'-(1,4-Phenylenedimethylene)bis[7,7-dimethyl-2-oxo-bicyclo[2.2.1]heptane-1-methanesulfonic acid]
7th on the list, which puts it at an estimated 1–5% of the formula.
Silicon dioxide
8th on the list, which puts it at an estimated 1–5% of the formula.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
9th on the list, which puts it at an estimated 1–5% of the formula.
2-Methyl-1,3-propanediol
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,1,1,3,5,5,5-Heptamethyl-3-octyl-trisiloxane
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polysilicone-15 is the siloxane polymer that conforms generally to the formula:
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ammonium Acryloyldimethyltaurate/VP Copolymer is a copolymer of ammonium acryloyldimethyltaurate and vinylpyrrolidone monomers
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
Every filter in this formula is photostable
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Caprylyl Methicone, Polysilicone-15
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.
This product is the "Protect" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 26 ingredients on the label.
Dissolves and carries everything else
Sets the thickness, spread and stability of the formula
Absorbs or scatters ultraviolet light
Lifts oil and dirt, or holds oil and water together
Softens and smooths by filling gaps between skin cells
Draws water into the upper layers of skin
Botanical material, usually for antioxidants or scent
Neutralises free radicals from UV and pollution
Binds trace metals that would otherwise spoil the formula
Loosens or dissolves dead surface cells
Forms a film that slows water loss
Sets the acidity the formula needs to work
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 10–40% of the formula.
Citrus Junos Fruit Extract is an extract of the fruits of Citrus junos, Rutaceae
2nd on the list, which puts it at an estimated 5–20% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
3rd on the list, which puts it at an estimated 5–20% of the formula.
Mel Extract (EU)
4th on the list, which puts it at an estimated 2–10% of the formula.
Dibutyl adipate
5th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.
Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone
6th on the list, which puts it at an estimated 2–10% of the formula.
3,3'-(1,4-Phenylenedimethylene)bis[7,7-dimethyl-2-oxo-bicyclo[2.2.1]heptane-1-methanesulfonic acid]
7th on the list, which puts it at an estimated 1–5% of the formula.
Silicon dioxide
8th on the list, which puts it at an estimated 1–5% of the formula.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
9th on the list, which puts it at an estimated 1–5% of the formula.
2-Methyl-1,3-propanediol
10th on the list, which puts it at an estimated 1–5% of the formula.
1,3-Propanediol, 2-amino-2-(hydroxymethyl)-
11th on the list, which puts it at an estimated 1–3% of the formula.
1,2,3-Propanetriol, homopolymer, octadecanoates (1:2) (2 mol glycerol average molar ratio)
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,1,1,3,5,5,5-Heptamethyl-3-octyl-trisiloxane
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polysilicone-15 is the siloxane polymer that conforms generally to the formula:
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ammonium Acryloyldimethyltaurate/VP Copolymer is a copolymer of ammonium acryloyldimethyltaurate and vinylpyrrolidone monomers
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1-hexadecanol, phosphate, potassium salt
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Stearic acid, monoester with glycerol
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Dihydroxypentane
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polyacrylate Crosspolymer-6 is a copolymer of ammonium acryloyldimethyltaurate, dimethylacrylamide, lauryl methacrylate and laureth-4 methacrylate, crosslinked with trimethylolpropane triacrylate
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ethanone, 1-(4-hydroxyphenyl)-,p-Hydroxyacetophenone
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Copolymer of PEG-180, dodoxynol-5, PEG-25 tristyrylphenol and tetramethoxymethylglycouril monomers
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2,3-Propanetricarboxylic acid, 2-hydroxy-, ester with 1,2,3-propanetriol monooctadecanoate
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Disodium dihydrogen ethylenediaminetetraacetate
Products in the same category that share this formula's distinguishing ingredients.
Haruharu Wonder
Shares 11 key ingredients with Weightless Sun Fluid: Water, Ethylhexyl Triazone, Dibutyl Adipate, Terephthalylidene Dicamphor Sulfonic Acid, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine
Haruharu Wonder
Shares 11 key ingredients with Weightless Sun Fluid: Water, Ethylhexyl Triazone, Dibutyl Adipate, Terephthalylidene Dicamphor Sulfonic Acid, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine
Haruharu Wonder
Shares 11 key ingredients with Weightless Sun Fluid: Water, Dibutyl Adipate, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid, Diethylamino Hydroxybenzoyl Hexyl Benzoate
Anua
Shares 11 key ingredients with Weightless Sun Fluid: Water, Dibutyl Adipate, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid, Caprylyl Methicone
ETUDE
Shares 11 key ingredients with Weightless Sun Fluid: Water, Dibutyl Adipate, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid, Diethylamino Hydroxybenzoyl Hexyl Benzoate
G9SKIN
Shares 11 key ingredients with Weightless Sun Fluid: Water, Dibutyl Adipate, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid, Diethylamino Hydroxybenzoyl Hexyl Benzoate
CITRUS JUNOS FRUIT EXTRACT, WATER, HONEY EXTRACT, DIBUTYL ADIPATE, ETHYLHEXYL TRIAZONE, TEREPHTHALYLIDENE DICAMPHOR SULFONIC ACID, SILICA, BUTYLENE GLYCOL, METHYLPROPANEDIOL, TROMETHAMINE, POLYGLYCERYL-3 DISTEARATE, 1,2-HEXANEDIOL, CAPRYLYL METHICONE, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE, POLYSILICONE-15, AMMONIUM ACRYLOYLDIMETHYLTAURATE/VP COPOLYMER, POTASSIUM CETYL PHOSPHATE, BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE, GLYCERYL STEARATE, PENTYLENE GLYCOL, POLYACRYLATE CROSSPOLYMER-6, HYDROXYACETOPHENONE, POLYETHER-1, GLYCERYL STEARATE CITRATE, ETHYLHEXYLGLYCERIN, DISODIUM EDTA.
Apply 15 minutes to sun exposed areas of the face/body before going out in the sun. Reapply every two hours for the optimal sun protection during the day.
Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry) skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
3 ingredients could feed malassezia: Polyglyceryl-3 Distearate, Glyceryl Stearate, Glyceryl Stearate Citrate. That describes the yeast's food supply, not a prediction that they will cause a breakout.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
Yes. Reading the full ingredient list, this formula is fragrance-free.
No. Reading the full ingredient list, this formula is no drying alcohol.
No — it contains Caprylyl Methicone, Polysilicone-15.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.
Use it in the morning, final morning step, before makeup.
It lists 26 ingredients, of which 5 are recorded as actives.
House of Hur.
It filters UV with Uvinul T 150 (ethylhexyl triazone), Mexoryl SX (terephthalylidene dicamphor sulfonic acid), Uvinul A Plus (diethylamino hydroxybenzoyl hexyl benzoate), Parsol SLX (polysilicone-15), Tinosorb S (bis-ethylhexyloxyphenol methoxyphenyl triazine).
Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.
Unlikely. It filters with organic (chemical) filters only, which dissolve into the formula rather than sitting on the surface, so they do not leave a white cast.
It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.
Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.
Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect