G9SKIN White In Milk Sun PLUS SPF50+ PA++++

G9SKIN

White In Milk Sun PLUS SPF50+ PA++++

face body sunscreen

Added Last edited

Fit by skin type

General, ingredient-based — not your personalized match.

Dry
61%
Combination (dry)
61%
Balanced
91%
Combination (oily)
79%
Oily
79%

See how this fits your skin

Take the skin test and I'll show you how suitable this product is for you.

Take the skin test
46
Ingredients
7
Benefits
3
Actives
Find Dupes

The G9SKIN White In Milk Sun PLUS SPF50+ PA++++ is a moisturizing and brightening sun cream for daily care that absorbs well. Formulated with niacinamide, glutathione, and ascorbic acid to help brighten the skin when used regularly.

Key Insights

Benefits

7
Anti-Aging
Dark Spot Fading
Evens Skin Tone
Hydration
Oil Control
Pore Minimizer
Soothing

Active Ingredients

3
Hyaluronic acid Vitamin B3 (niacinamide) Vitamin C

Risks

4
Alcohol
Microplastic
Silicone
Synthetic polymer

About White In Milk Sun PLUS SPF50+ PA++++

Overview

White In Milk Sun PLUS SPF50+ PA++++ is a lightweight sunscreen from G9SKIN. It is rated SPF 50+ PA++++, meaning it is tested to the top of both the UVB and the UVA scales used in Asia. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 46 ingredients, each broken down in full below.

Texture and finish

By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. It contains both silicones and oils, a combination that usually finishes smooth and slightly satin and sits well under makeup. Hydration is handled by Propanediol, Glycerin and Raspberry Seed Oil/tocopheryl Succinate Aminopropanediol Esters, humectants that pull water into the upper layers of skin rather than sealing it there.

UV filter system

It is a chemical (organic-filter) sunscreen, using Uvinul T 150, Mexoryl SX, Uvinul A Plus, Parsol SLX and Tinosorb S. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.

What the formula does

Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Propanediol, Glycerin, Raspberry Seed Oil/tocopheryl Succinate Aminopropanediol Esters and Sodium Hyaluronate.

Soothing: Moderate. Ingredients aimed at visible redness and reactivity, and here that comes from Diethylamino Hydroxybenzoyl Hexyl Benzoate, Niacinamide, Sodium Hyaluronate and Adenosine.

Who it suits

On richness alone it suits Balanced skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.

What it does not target

The formula contributes little or nothing on cell renewal and firmness signalling. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.

What is not in it

Reading the full list, the formula is essential-oil-free, no drying alcohol, paraben-free, sulfate-free, dye-free and no animal-derived ingredients. Those claims come from the ingredient list itself, not from the packaging. It does contain fragrance, worth knowing if your skin reacts to any of them.

Where it fits in a routine

Use it in the morning. In a routine it goes final morning step, before makeup. Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms. Reapply every two hours of sun exposure, and after swimming or towelling off. Let it set for a couple of minutes before makeup so it does not pill.

This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.

Pros and cons

Drawn purely from the ingredient list

Pros

  • Broad-spectrum coverage that reaches into UVA I
  • Every UV filter in it is photostable
  • No essential oils
  • No drying alcohol
  • Strong humectant content for hydration
  • No common irritants flagged in the list

Things to know

  • Contains fragrance or declared fragrance allergens
  • Contains a solid synthetic polymer (microplastic)
  • 4 ingredients could feed malassezia (fungal acne)

Which skin types it suits

Scored on how rich or light the formula reads from its INCI order.

Suitable for

  • Balanced skin

May suit

  • Combination (oily) skin
  • Oily skin

Less suitable for

  • Dry skin
  • Combination (dry) skin

Sensitive skin

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Skin concerns

Based on the curated benefits documented for this product's ingredients.

Helps with

  • Hydration 17 ingredients

    Attracts and locks in moisture to keep skin plump and dewy

  • Anti-Aging 11 ingredients

    Boosts collagen and cell turnover to reduce fine lines and wrinkles

  • Soothing 5 ingredients

    Calms redness, irritation, and inflammation for sensitive skin

  • Evens Skin Tone 2 ingredients

    Brightens and balances complexion for a more uniform appearance

  • Dark Spot Fading 1 ingredient

    Fades hyperpigmentation and evens out dark spots over time

  • Oil Control 1 ingredient

    Regulates sebum production to reduce shine and greasiness

  • Pore Minimizer 1 ingredient

    Tightens and refines the look of enlarged pores

Does not target

Anti-Acne Blackhead Reducing Smooths Bumpy Skin

None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.

UV filters

Chemical (organic) filter system · broad-spectrum through UVA I

Uvinul T 150

ethylhexyl triazone
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
Next-generation UVB filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 5% (EU)

The most efficient UVB absorber available by weight, which is why high-SPF formulas reach SPF 50+ without feeling heavy. Contributes nothing to UVA.

Mexoryl SX

terephthalylidene dicamphor sulfonic acid
Protects from
UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation UVA filter
Approved in
EU, UK, Korea, Japan — US approval limited to specific products
Maximum permitted level
Up to 10% (EU)

Water-soluble UVA filter, which is unusual — most UVA filters are oil-soluble.

Uvinul A Plus

diethylamino hydroxybenzoyl hexyl benzoate
Protects from
UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation UVA filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

A photostable replacement for avobenzone: it peaks at 354 nm, deep in UVA I, and does not need a stabiliser to survive the day.

Parsol SLX

polysilicone-15
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
Polymeric UVB filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

A polymer, so it stays on the surface of skin rather than penetrating — low irritation potential and no measurable systemic absorption.

Tinosorb S

bis-ethylhexyloxyphenol methoxyphenyl triazine
Protects from
UVB (290–320 nm), UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation broad-spectrum filter
Approved in
EU, UK, Korea, Japan, Australia — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

One of the most photostable filters in use, and it stabilises avobenzone and octinoxate alongside it. Oil-soluble, cosmetically light, no white cast.

Key ingredients

The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.

1st on the list, which puts it at an estimated 30–80% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration

2nd on the list, which puts it at an estimated 5–20% of the formula.

Dibutyl adipate

Hydration

3rd on the list, which puts it at an estimated 5–20% of the formula.

1,3-dihydroxypropane

Hydration

4th on the list, which puts it at an estimated 2–10% of the formula.

Diisopropyl sebacate

Hydration

5th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.

Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone

Anti-Aging

6th on the list, which puts it at an estimated 2–10% of the formula.

3,3'-(1,4-Phenylenedimethylene)bis[7,7-dimethyl-2-oxo-bicyclo[2.2.1]heptane-1-methanesulfonic acid]

Anti-Aging
Niacinamide Vitamin B3 (niacinamide)

8th on the list, which puts it at an estimated 1–5% of the formula.

Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**

Soothing Anti-Aging Pore Minimizer

11th on the list, which puts it at an estimated 1–3% of the formula.

Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane

Hydration Anti-Aging

12th on the list, which puts it at an estimated 1–3% of the formula.

Alcohols, C16-18

Hydration

14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Dihydroxypentane

Hydration

15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester

Anti-Aging

16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,1,1,3,5,5,5-Heptamethyl-3-octyl-trisiloxane

Hydration

Formula analysis

Each axis is scored from the ingredients present and how high up the list they sit.

Hydration High

Ingredients that pull and hold water in the upper layers of skin

Barrier support Low

Lipids and repair signals that support skin barrier integrity

Antioxidant support Low

Ingredients that mop up free radicals from UV and pollution

Oil control Low

Ingredients that moderate sebum or absorb shine

Brightening Low

Ingredients that act on uneven tone and post-inflammatory marks

Soothing Moderate

Ingredients aimed at visible redness and reactivity

Cell renewal None

Retinoids, acids and enzymes that speed surface turnover

Firmness signalling None

Peptides and growth factors that signal for collagen support

Photostability Very high

Every filter in this formula is photostable

Active and supporting ingredients

"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.

Supporting ingredients (38)

Solvents, emollients, texture agents and preservatives — the formula that carries the actives.

Water Dibutyl Adipate Propanediol Diisopropyl Sebacate 2-dimethylbicyclohept-2-ylidene Ethanol Polyglyceryl-3 Distearate Tromethamine Glycerin Cetearyl Alcohol 1,2-hexanediol Pentylene Glycol Caprylyl Methicone Hydrolyzed Cranberry Fruit/leaf Extract Raspberry Seed Oil/tocopheryl Succinate Aminopropanediol Esters Vaccinium Corymbosum (blueberry) Fruit Water Hydrolyzed Mulberry Fruit Hydrolyzed Strawberry Fruit Polymethylsilsesquioxane Caprylic/capric/succinic Triglyceride Glyceryl Stearate Potassium Cetyl Phosphate Methylpropanediol Ammonium Acryloyldimethyltaurate/vp Copolymer Ammonium Polyacryloyldimethyl Taurate Glyceryl Stearate Citrate Carbomer Ethylhexylglycerin Adenosine Acrylates/c10-30 Alkyl Acrylate Crosspolymer Sodium Polyacrylate Polyether-1 T-butyl Alcohol Biosaccharide Gum-1 Milk Protein Tocopherol Butylene Glycol Glutathione Parfum

What is and is not in it

Read from the full ingredient list. A brand's own claim may differ.

Free from

  • Essential-oil-free
  • No drying alcohol
  • Paraben-free
  • Sulfate-free
  • Dye-free
  • No animal-derived ingredients

Contains

  • Fragrance

    Parfum

  • Silicones

    Caprylyl Methicone, Polysilicone-15, Polymethylsilsesquioxane

  • Microplastics

    Polymethylsilsesquioxane

  • Facial oils

    Raspberry Seed Oil/tocopheryl Succinate Aminopropanediol Esters

What to layer it with

Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.

Compatible with

  • Vitamin C (L-ascorbic acid)
  • PHAs (gluconolactone)
  • Azelaic acid
  • Copper peptides
  • Bakuchiol
  • Niacinamide
  • Hyaluronic acid
  • Ceramides
  • Signal peptides
  • Panthenol
  • Sunscreen

Use with caution

  • Benzoyl peroxide

    Best kept to separate routines — one in the morning, one at night, or on alternate days.

  • Retinoids (retinol, retinal)

    Can be layered, but the combination raises the irritation risk. Go slowly.

  • AHAs (glycolic, lactic)

    Can be layered, but the combination raises the irritation risk. Go slowly.

  • BHA (salicylic acid)

    Can be layered, but the combination raises the irritation risk. Go slowly.

Where it fits in a routine

Morning
  1. Cleanse
  2. Toning
  3. Treat
  4. Moisturise
  5. Protect

This product is the "Protect" step.

  • Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms.
  • Reapply every two hours of sun exposure, and after swimming or towelling off.
  • Let it set for a couple of minutes before makeup so it does not pill.

Safety and suitability

Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.

Pregnancy and breastfeeding
Nothing in this formula is on the standard pregnancy-caution list. That is not clearance — ask your doctor about anything you use daily.
Fungal acne (malassezia)
4 ingredients could feed malassezia: Polyglyceryl-3 Distearate, Raspberry Seed Oil/tocopheryl Succinate Aminopropanediol Esters, Glyceryl Stearate, Glyceryl Stearate Citrate. That is about the yeast's food supply, not a prediction that you will break out.
Sensitive and reactive skin
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Recorded ingredient risks
Alcohol, Microplastic, Silicone, Synthetic polymer

Ingredients by function

Most ingredients do more than one job, so these counts add up to more than the 46 ingredients on the label.

11
Texture agent

Sets the thickness, spread and stability of the formula

10
Solvent

Dissolves and carries everything else

7
Emollient

Softens and smooths by filling gaps between skin cells

7
Occlusive

Forms a film that slows water loss

6
Surfactant

Lifts oil and dirt, or holds oil and water together

5
UV filter

Absorbs or scatters ultraviolet light

3
Active

Changes how skin behaves rather than how it feels

3
Humectant

Draws water into the upper layers of skin

2
Antioxidant

Neutralises free radicals from UV and pollution

2
pH adjuster

Sets the acidity the formula needs to work

1
Fragrance / colour

Changes how the product smells or looks

1
Plant extract

Botanical material, usually for antioxidants or scent

Ingredient breakdown

Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.

1 Water Solvent
Estimated level
30–80%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

1st on the list, which puts it at an estimated 30–80% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration
3 scientific references
  • Skin Research and Technology, May 2015, pages 131-136
  • Skin Pharmacology and Applied Skin Physiology, November-December 1999, pages 344-351
  • Journal of Cosmetic Science, September-October 1993, pages 249-262
2 Dibutyl Adipate Emollient
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Occlusive, Solvent

2nd on the list, which puts it at an estimated 5–20% of the formula.

Dibutyl adipate

Hydration
3 Propanediol Texture agent
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent, Solvent

3rd on the list, which puts it at an estimated 5–20% of the formula.

1,3-dihydroxypropane

Hydration
4 scientific references
  • PubChem Compound Summary, April 2021, ePublication
  • SpecialChem, Accessed April 2021, ePublication
  • Cosmetic Ingredient Review, June 2018, pages 1-73
  • Cosmetics & Toiletries, May 2013, pages 81-86
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Solvent

4th on the list, which puts it at an estimated 2–10% of the formula.

Diisopropyl sebacate

Hydration
8 scientific references
  • Supercharged Hydration
  • How Hyaluronic Acid Benefits Skin
  • What is Dehydrated Skin & How to Choose the Best Products
  • What Your Moisturizer Must Contain
  • Moisturizer Myths You Should Stop Believing Now
  • The Benefits of Glycerin in Skin Care
  • The Best Face Oils for Skin
  • How Facial Oils Help Skin
Estimated level
2–5%
Confidence
High — bounded by a regulatory limit
Roles
UV filter

5th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.

Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone

Anti-Aging
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

6th on the list, which puts it at an estimated 2–10% of the formula.

3,3'-(1,4-Phenylenedimethylene)bis[7,7-dimethyl-2-oxo-bicyclo[2.2.1]heptane-1-methanesulfonic acid]

Anti-Aging
8 scientific references
  • 5 Super Anti-Aging Antioxidants Your Skin Needs
  • How to Keep Your Neck & Chest Looking Young
  • Acne & Aging Skin
  • How to Diminish Uneven Skin Tone and Get Your Glow Back
  • What Are Peptides and What Do They Do for Skin?
  • The Truth About Firming Creams
  • Top 5 Reasons to Add Antioxidants to Your Skin Care Routine
  • Anti-Aging Superstars
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line

7th on the list, which puts it at an estimated 1–5% of the formula.

2-(3,3-Dimethylbicyclo[2.2.1]hept-2-ylidene) ethanol

8 Niacinamide Active
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Active

8th on the list, which puts it at an estimated 1–5% of the formula.

Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**

Soothing Anti-Aging Pore Minimizer
15 scientific references
  • International Journal of Dermatology, February 2021, pages 166-173
  • Biomolecules & Therapeutics, July 2019, pages 562-569
  • Experimental Dermatology, February 2019, pages 15-22
  • Dermatologic Therapy, September 2017, ePublication
  • Journal of Investigative Dermatology, May 2017, page S116
  • International Journal of Pharmaceutics, March 2017, pages 158-162
  • Facial Plastic Surgery Clinics of North America, May 2016, pages 145-152
  • Clinical, Cosmetic, and Investigational Dermatology, July 2015, pages 405-412
  • Skin Pharmacology and Physiology, June 2014, pages 311-315
  • International Journal of Pharmacy, January 2013, pages 192-201
  • Dermatoendrocrinology, July 2012, pages 308-319
  • International Journal of Toxicology, September 2005, pages 1-31
  • Dermatologic Surgery, July 2005, pages 860-865
  • International Journal of Cosmetic Science, October 2004, pages 231-238
  • Journal of Cosmetic Dermatology, April 2004, pages 88-93
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant

9th on the list, which puts it at an estimated 1–5% of the formula.

1,2,3-Propanetriol, homopolymer, octadecanoates (1:2) (2 mol glycerol average molar ratio)

10 Tromethamine pH adjuster
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
pH adjuster

10th on the list, which puts it at an estimated 1–5% of the formula.

1,3-Propanediol, 2-amino-2-(hydroxymethyl)-

11 Glycerin Humectant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Occlusive, Texture agent, Solvent

11th on the list, which puts it at an estimated 1–3% of the formula.

Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane

Hydration Anti-Aging
6 scientific references
  • Journal of Pharmaceutical Investigation, March 2021, pages 223-231
  • International Journal of Toxicology, November/December 2019, Volume 38, Supplement 3, pages 6S-22S
  • International Journal of Cosmetic Science, August 2016, ePublication
  • British Journal of Dermatology, July 2008, pages 23-34
  • Journal of Cosmetic Dermatology, June 2007, pages 75-82
  • Proceedings of the National Academy of Sciences, June 2003, pages 7, 360-7, 365
12 Cetearyl Alcohol Emollient
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Surfactant, Texture agent

12th on the list, which puts it at an estimated 1–3% of the formula.

Alcohols, C16-18

Hydration
4 scientific references
  • CosmeticsInfoorg, Accessed March 2021, ePublication
  • FDA Cosmetic Labeling Claims, August 2020, ePublication
  • Journal of the Society of Cosmetic Scientists of Korea, June 2009, pages 103-110
  • Journal of the American College of Toxicology, 1988, pages 359-413
13 1,2-hexanediol Solvent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Solvent

13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Solvent

14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Dihydroxypentane

Hydration
4 scientific references
  • https://thedermreviewcom/pentylene-glycol/
  • Regulatory Toxicology and Pharmacology, July 2017, pages 106-111
  • Prospector, June 2015, ePublication
  • International Journal of Toxicology, October 2012, pages 147S-168S
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
UV filter

15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester

Anti-Aging
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,1,1,3,5,5,5-Heptamethyl-3-octyl-trisiloxane

Hydration Silicone
17 Polysilicone-15 UV filter
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
UV filter

17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Polysilicone-15 is the siloxane polymer that conforms generally to the formula:

Anti-Aging
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Occlusive, Plant extract

18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Hydrolyzed Cranberry Fruit/Leaf Extract is the hydrolysate of an extract of the leaves and fruit of the Myrtille, Vacciniium vitis-idaea, Ericaceae, obtained by acid, enzyme or other method of hydrolysis

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Raspberry Seed Oil/Tocopheryl Succinate Aminopropanediol Esters is the product obtained by the transesterification of Aminopropanediol with with Rubus Idaeus (Raspberry) Seed Oil and Tocopheryl Succinate

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Vaccinium Corymbosum (Blueberry) Fruit Water is the aqueous solution of the steam distillates obtained from the fruit of Vaccinium corymbosum.

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Occlusive

21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Hydrolyzed Mulberry Fruit is the hydrolysate of the fruit of Morus nigra derived by acid, enzyme or other method of hydrolysis

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Occlusive

22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Hydrolyzed Strawberry Fruit is the hydrolysate of the fruit of Fragaria vesca L., derived by acid, enzyme or other method of hydrolysis

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Active

23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Hyaluronic acid, sodium, salt

Hydration Anti-Aging Soothing
5 scientific references
  • Der Hautarzt; Zeitschrift fur Dermatologie, Venerologie, und Verwandte Gebiete, December 2017, pages 987-993
  • Journal of Cosmetic Dermatology, July 2014, pages 277-287
  • Journal of Clinical and Aesthetic Dermatology, October 2012, pages 20-23
  • DermatoEndocrinology, July-December 2012, pages 253-258
  • Journal of Drugs in Dermatology, September 2011, pages 990-1000
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Polymer formed by hydrolysis and condensation of methyltrimethoxysilane

Microplastic
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Surfactant

25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2,3-Propanetriol, triesters with decanoic, octanoic and butanedioic acids

26 Glyceryl Stearate Emollient
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Surfactant

26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Stearic acid, monoester with glycerol

Hydration
3 scientific references
  • Cosmeticsinfoorg, Accessed November 2021, ePublication
  • Drugs in Context, April 2018, pages 1-14
  • International Journal of Toxicology, May 2007, pages 1–30
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
UV filter

27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]

Anti-Aging
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Surfactant

28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1-hexadecanol, phosphate, potassium salt

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Solvent

29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2-Methyl-1,3-propanediol

Hydration
3 scientific references
  • PubChem, Accessed April 2021, ePublication
  • Cosmetic Ingredient Review, June 2018, pages 1-73
  • Contact Dermatitis, September 2017, pages 159-162
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Ammonium Acryloyldimethyltaurate/VP Copolymer is a copolymer of ammonium acryloyldimethyltaurate and vinylpyrrolidone monomers

Hydration
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1-Propanesulfonic acid, 2-methyl-2-[(1-oxo-2-propenyl)amino]-, monoammonium salt, homopolymer

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Surfactant

32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2,3-Propanetricarboxylic acid, 2-hydroxy-, ester with 1,2,3-propanetriol monooctadecanoate

Hydration
33 Carbomer Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2-Propenoic acid, polymer with 2,2-bis(hydroxymethyl)propane-1,3-diol 2-propenyl ether

Synthetic polymer
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Propanediol, 3-(2-ethylhexyloxy)

Hydration
5 scientific references
  • PLoS One, October 2016, ePublication
  • Contact Dermatitis, May 2016, pages 281-288
  • International Journal of Toxicology, September 2013, pages 5S-21S
  • Personal Care, 2008, pages 1-4
  • Cosmetic Science Technology, 2006, pages 1-11
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

6-Amino-9-beta-D-ribofuranosyl-9H-purine

Soothing
8 scientific references
  • PubChem, Accessed May 2021, ePublication
  • Cosmetic Ingredient Review, September 2020, pages 1-38
  • Experimental Dermatology, August 2014, pages 553-554
  • Journal of Investigative Dermatology, August 2011, pages 526-546
  • International Journal of Cosmetic Science, December 2006, pages 447-451
  • British Journal of Pharmacology, October 2008, issue 4, pages 475-486
  • PloS One, May 2008 (ePublication)
  • >International Journal of Cosmetic Science, August 2006, pages 447-451
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Occlusive, Texture agent

36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

C10-30 alkyl propenoate, polymer with propenoic acid, butenoic acidand/or alkyl propenoates, product with propenyl sucrose ether or propenyl 2,2-dihydroxymethyl-1,3-propanediol

Synthetic polymer
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Occlusive, Texture agent

37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2-Propenoic acid, homopolymer, sodium salt

Oil Control Synthetic polymer
7 scientific references
  • International Food Research Journal, February 2021, pages 44 - 55
  • Journal of Nanoscience and Nanotechnology, March 2018, pages 1, 611-1, 614
  • Industrial & Engineering Chemistry Research, November 2014, pages 18, 346-18, 351
  • Journal of Applied Polymer Science, November 2001, pages 1, 515-1, 520
  • United States Patent, April 2000, ePublication
  • https://wwwsocochemcom/is-sodium-polyacrylate-safehtml
  • https://wwwcir-safetyorg/sites/default/files/acryco092018TARpdf
38 Polyether-1 Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Copolymer of PEG-180, dodoxynol-5, PEG-25 tristyrylphenol and tetramethoxymethylglycouril monomers

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Solvent

39th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2-Methylpropan-2-ol

Alcohol
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

40th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Biosaccharide Gum-1 is a fermentation gum derived from sorbitol. It is described as a polymer of α-L-fucose-1|->|3-α- D-galactose-1|->|3-α-D-galacturonic acid trisaccharides

Hydration Soothing
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

41st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Lactis Proteinum (EU),Proteins, Milk

Hydration
8 scientific references
  • Supercharged Hydration
  • How Hyaluronic Acid Benefits Skin
  • What is Dehydrated Skin & How to Choose the Best Products
  • What Your Moisturizer Must Contain
  • Moisturizer Myths You Should Stop Believing Now
  • The Benefits of Glycerin in Skin Care
  • The Best Face Oils for Skin
  • How Facial Oils Help Skin
42 Tocopherol Antioxidant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Antioxidant

42nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E

Anti-Aging Evens Skin Tone Soothing
4 scientific references
  • Journal or Agricultural and Food Chemistry, June 2010, pages 7013-7020
  • Journal of Investigative Dermatology, November 2001, pages 1212-1217
  • Canadian Family Physician, July 2006, pages 855-856
  • Dermatologic Surgery, April 1999, pages 311-315
43 Butylene Glycol Humectant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Texture agent, Solvent

43rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration
5 scientific references
  • CosmeticsInfoorg, Accessed March 2021, ePublication
  • US Food and Drug Administration Code of Federal Regulations</em>, Accessed March 2021, ePublication
  • International Journal of Toxicology, May 2011, pages 5S-16S
  • Skin Research and Technology, November 2007, pages 417-24
  • Journal of the American College of Toxicology, September 1985, pages 223-248
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

44th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Glycine, N-(N-L-.gamma.-glutamyl-L-cysteinyl)-

Anti-Aging
8 scientific references
  • Journal of Cosmetic Dermatology, June 2019, pages 728–737
  • Clinical Cosmetic and Investigative Dermatology, April 2017, pages 147-153 and October 2014, pages 267-274
  • Nutrients, August 2017, pages 1-27
  • DermatoEndocrinology, July 2012, pages 308-319
  • Journal of Agricultural and Food Chemistry, 2011, pages 3, 940-3, 949
  • The Dermatologist, October 2011, volume 19, issue 10
  • Journal of Dermatologic Science, May 2010, pages 85-90
  • Free Radical Biology and Medicine, October 1994, pages 333-349
45 Ascorbic Acid Active
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Active, Antioxidant, pH adjuster

45th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Ascorbic acid

Anti-Aging Dark Spot Fading Evens Skin Tone
12 scientific references
  • Drug Delivery, February 2021, pages 445-453
  • Journal of Cosmetic Dermatology, December 2020, pages 3, 262-3, 269
  • Journal of Oral and Maxillofacial Pathology, May-August 2020, pages 374-382
  • Journal of Cosmetic Dermatology, March 2020, pages 671-676
  • Journal of Clinical and Aesthetic Dermatology, July 2017 pages 14-17
  • Journal of Drugs in Dermatology, July 2016, pages 863-867
  • Clinical, Cosmetic, and Investigational Dermatology, September 2015, pages 463-470
  • Indian Dermatology Online Journal, April-June 2013, pages 143-146
  • AAPS PharmSciTech, July 2011, pages 917-923
  • Journal of Drugs in Dermatology, July 2008, Supplement, pages s2-s6
  • International Journal of Toxicology, Supplement 2, March 2005, pages 51-111
  • Skin Pharmacology and Physiology, July-August 2004, pages 200-206
46 Parfum Fragrance / colour
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Fragrance / colour

46th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Parfum is a term for ingredient labelling used to identify that a product contains a material or a combination of materials normally added to a cosmetic to produce or to mask a particular odour. According to Article 19 of the Cosmetics Regulation, 'Perfume and aromatic compositions and their raw materials shall be referred to by the terms ‘parfum’ or ‘aroma’. '

People also compare

Products in the same category that share this formula's distinguishing ingredients.

Black Bamboo Top-to-Toe SPF Veil

Haruharu Wonder

Shares 15 key ingredients with White In Milk Sun PLUS SPF50+ PA++++: Water, Ethylhexyl Triazone, Dibutyl Adipate, Terephthalylidene Dicamphor Sulfonic Acid, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine

Black Bamboo Top-to-Toe SPF Veil SPF 50+ PA++++

Haruharu Wonder

Shares 15 key ingredients with White In Milk Sun PLUS SPF50+ PA++++: Water, Ethylhexyl Triazone, Dibutyl Adipate, Terephthalylidene Dicamphor Sulfonic Acid, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine

Cica Regen Vegan Sun SPF50 PA++++

Dr. Ceuracle

Shares 13 key ingredients with White In Milk Sun PLUS SPF50+ PA++++: Water, Dibutyl Adipate, Propanediol, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid

Cica Regen Vegan Sun SPF50+

Dr. Ceuracle

Shares 13 key ingredients with White In Milk Sun PLUS SPF50+ PA++++: Water, Dibutyl Adipate, Propanediol, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid

Frequently asked questions

What ingredients are in White In Milk Sun PLUS SPF50+ PA++++?

WATER, DIBUTYL ADIPATE, PROPANEDIOL, DIISOPROPYL SEBACATE, ETHYLHEXYL TRIAZONE, TEREPHTHALYLIDENE DICAMPHOR SULFONIC ACID, 2-DIMETHYLBICYCLOHEPT-2-YLIDENE ETHANOL, NIACINAMIDE, POLYGLYCERYL-3 DISTEARATE, TROMETHAMINE, GLYCERIN, CETEARYL ALCOHOL, 1,2-HEXANEDIOL, PENTYLENE GLYCOL, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE, CAPRYLYL METHICONE, POLYSILICONE-15, HYDROLYZED CRANBERRY FRUIT/LEAF EXTRACT, RASPBERRY SEED OIL/TOCOPHERYL SUCCINATE AMINOPROPANEDIOL ESTERS, VACCINIUM CORYMBOSUM (BLUEBERRY) FRUIT WATER, HYDROLYZED MULBERRY FRUIT, HYDROLYZED STRAWBERRY FRUIT, SODIUM HYALURONATE, POLYMETHYLSILSESQUIOXANE, CAPRYLIC/CAPRIC/SUCCINIC TRIGLYCERIDE, GLYCERYL STEARATE, BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE, POTASSIUM CETYL PHOSPHATE, METHYLPROPANEDIOL, AMMONIUM ACRYLOYLDIMETHYLTAURATE/VP COPOLYMER, AMMONIUM POLYACRYLOYLDIMETHYL TAURATE, GLYCERYL STEARATE CITRATE, CARBOMER, ETHYLHEXYLGLYCERIN, ADENOSINE, ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER, SODIUM POLYACRYLATE, POLYETHER-1, T-BUTYL ALCOHOL, BIOSACCHARIDE GUM-1, MILK PROTEIN, TOCOPHEROL, BUTYLENE GLYCOL, GLUTATHIONE, ASCORBIC ACID, PARFUM.

What are the active ingredients in White In Milk Sun PLUS SPF50+ PA++++?

NIACINAMIDE, SODIUM HYALURONATE, ASCORBIC ACID.

How do I use White In Milk Sun PLUS SPF50+ PA++++?

Apply 30 minutes to sun-exposed areas of the face/body before going out in the sun. Reapply every two hours for the perfect sun protection during the day

What skin types is White In Milk Sun PLUS SPF50+ PA++++ good for?

Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry) skin.

Is White In Milk Sun PLUS SPF50+ PA++++ good for sensitive skin?

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Is White In Milk Sun PLUS SPF50+ PA++++ fungal acne safe?

4 ingredients could feed malassezia: Polyglyceryl-3 Distearate, Raspberry Seed Oil/tocopheryl Succinate Aminopropanediol Esters, Glyceryl Stearate, Glyceryl Stearate Citrate. That describes the yeast's food supply, not a prediction that they will cause a breakout.

Can I use White In Milk Sun PLUS SPF50+ PA++++ while pregnant?

Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.

Is White In Milk Sun PLUS SPF50+ PA++++ fragrance free?

No — it contains Parfum.

Does White In Milk Sun PLUS SPF50+ PA++++ contain alcohol?

No. Reading the full ingredient list, this formula is no drying alcohol.

Is White In Milk Sun PLUS SPF50+ PA++++ silicone free?

No — it contains Caprylyl Methicone, Polysilicone-15, Polymethylsilsesquioxane.

Does White In Milk Sun PLUS SPF50+ PA++++ contain essential oils?

No. Reading the full ingredient list, this formula is essential-oil-free.

Is White In Milk Sun PLUS SPF50+ PA++++ paraben free?

Yes. Reading the full ingredient list, this formula is paraben-free.

What can I layer with White In Milk Sun PLUS SPF50+ PA++++?

It layers well with Vitamin C (L-ascorbic acid), PHAs (gluconolactone), Azelaic acid, Copper peptides, Bakuchiol, Niacinamide. Take more care combining it with Benzoyl peroxide, Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid) — use them in separate routines or on alternate days.

When should I apply White In Milk Sun PLUS SPF50+ PA++++?

Use it in the morning, final morning step, before makeup.

How many ingredients does White In Milk Sun PLUS SPF50+ PA++++ have?

It lists 46 ingredients, of which 8 are recorded as actives.

Who makes White In Milk Sun PLUS SPF50+ PA++++?

G9SKIN.

What UV filters are in White In Milk Sun PLUS SPF50+ PA++++?

It filters UV with Uvinul T 150 (ethylhexyl triazone), Mexoryl SX (terephthalylidene dicamphor sulfonic acid), Uvinul A Plus (diethylamino hydroxybenzoyl hexyl benzoate), Parsol SLX (polysilicone-15), Tinosorb S (bis-ethylhexyloxyphenol methoxyphenyl triazine).

Is White In Milk Sun PLUS SPF50+ PA++++ broad spectrum?

Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.

Does White In Milk Sun PLUS SPF50+ PA++++ leave a white cast?

Unlikely. It filters with organic (chemical) filters only, which dissolve into the formula rather than sitting on the surface, so they do not leave a white cast.

Is White In Milk Sun PLUS SPF50+ PA++++ reef safe?

It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.

Can I wear White In Milk Sun PLUS SPF50+ PA++++ under makeup?

Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.

How often should I reapply White In Milk Sun PLUS SPF50+ PA++++?

Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.

Brand
G9SKIN

Reviews

0 total

Log in to leave a review.

No reviews yet. Be the first to share your thoughts.