innisfree
Cherry Blossom Glow Tone-Up Cream
face neck cream
innisfree
face neck cream
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testThe INNISFREE Cherry Blossom Glow Tone-Up Cream is a lightweight, hydrating cream that brightens your skin and gives it a fresh, radiant glow. Enriched with cherry blossom extract, it helps even out your skin tone while keeping it soft and moisturized. The creamy formula blends smoothly, leaving your skin looking luminous and healthy, with a subtle, dewy finish. Perfect for achieving a natural, glowing look. Formulated with niacinamide and skin-loving ingredients like glycerin and betaine, this tone-up cream also supports skin barrier health while providing lasting hydration. Its gentle, alcohol-free, and paraben-free formula makes it suitable for all skin types, including sensitive skin. Whether used alone or as a makeup base, it enhances your complexion with a soft-focus effect, making your skin appear smooth, even, and effortlessly radiant.
Cherry Blossom Glow Tone-Up Cream is a lightweight cream from innisfree, a brand based in Korea. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 38 ingredients, each broken down in full below.
By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Propanediol, Glycerin and Betaine, humectants that pull water into the upper layers of skin rather than sealing it there.
It is a mineral sunscreen, filtering with Titanium Dioxide. Between them those filters cover UVB and UVA II. They stop short of UVA I (340–400 nm), the deepest ageing wavelengths, so this is not a broad-spectrum filter system by the strictest reading. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.
Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Propanediol, Glycerin, Betaine and Ethylhexylglycerin.
On richness alone it suits Balanced skin best, and is the least natural fit for Dry and Combination (dry) skin. A few ingredients carry irritation flags, so reactive skin should patch test before using it on the whole face.
The formula contributes little or nothing on antioxidant protection, cell renewal and firmness signalling. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is no drying alcohol, paraben-free, microplastic-free, sulfate-free, oil-free and no animal-derived ingredients. Those claims come from the ingredient list itself, not from the packaging. It does contain fragrance and essential oils, worth knowing if your skin reacts to any of them.
It can be used morning and evening. In a routine it goes after serums. Seal in your serums with it; in the morning, sunscreen still goes on top. It carries UV filters, so it belongs in your morning routine.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
A few ingredients here carry irritation flags. Reactive skin should patch test on the jawline for a few days before using it on the whole face.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Regulates sebum production to reduce shine and greasiness
Calms redness, irritation, and inflammation for sensitive skin
Brightens and balances complexion for a more uniform appearance
Tightens and refines the look of enlarged pores
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
Mineral filter system · does not reach UVA I
Strong UVB and short-UVA protection, but it stops before UVA I — a mineral formula leaning on titanium dioxide alone needs zinc oxide beside it for deep UVA.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Dimethicone
3rd on the list, which puts it at an estimated 5–20% of the formula.
1,3-dihydroxypropane
4th on the list, which puts it at an estimated 2–10% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
5th on the list, which puts it at an estimated 2–10% of the formula.
Carbonic Acid, Dicaprylyl Ester
6th on the list, which puts it at an estimated 2–10% of the formula.
Titanium dioxide (CI 77891)
9th on the list, which puts it at an estimated 1–5% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Methanaminium, 1-carboxy-N,N,N-trimethyl-, hydroxide, inner salt
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Bis(16-methylheptadecyl) malate
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Trisiloxane, Octamethyl-
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octanoic acid, monoester with glycerol
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Aluminium hydroxide
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
Every filter in this formula is photostable
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Parfum, Geraniol, Limonene
Geraniol, Limonene
Dimethicone, Trisiloxane, Dimethicone/phenyl Vinyl Dimethicone Crosspolymer
CI 77891, CI 77491
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.
This product is the "Moisturise" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 38 ingredients on the label.
Sets the thickness, spread and stability of the formula
Forms a film that slows water loss
Lifts oil and dirt, or holds oil and water together
Changes how the product smells or looks
Softens and smooths by filling gaps between skin cells
Dissolves and carries everything else
Draws water into the upper layers of skin
Loosens or dissolves dead surface cells
Absorbs or scatters ultraviolet light
Changes how skin behaves rather than how it feels
Neutralises free radicals from UV and pollution
Binds trace metals that would otherwise spoil the formula
Botanical material, usually for antioxidants or scent
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Dimethicone
3rd on the list, which puts it at an estimated 5–20% of the formula.
1,3-dihydroxypropane
4th on the list, which puts it at an estimated 2–10% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
5th on the list, which puts it at an estimated 2–10% of the formula.
Carbonic Acid, Dicaprylyl Ester
6th on the list, which puts it at an estimated 2–10% of the formula.
Titanium dioxide (CI 77891)
7th on the list, which puts it at an estimated 1–5% of the formula.
CI 77891 is classed chemically as an inorganic colour (see also INCI: Titanium dioxide). It conforms to the formula
8th on the list, which puts it at an estimated 1–5% of the formula.
Sorbitan, mono-9-octadecenoate, poly(oxy-1,2-ethanediyl) derivs., (Z)-
9th on the list, which puts it at an estimated 1–5% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Methanaminium, 1-carboxy-N,N,N-trimethyl-, hydroxide, inner salt
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Bis(16-methylheptadecyl) malate
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Trisiloxane, Octamethyl-
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ammonium Acryloyldimethyltaurate Crosspolymer is a polymer of Ammonium AMPS crosslinked with Trimethylolpropane Triacrylate.
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1-Ethenyl-2-pyrrolidinone, polymer with 1-ethenylhexahydro-2H-azepin-2-one, N-(3-dimethylaminopropyl)-2-propenamide, 2-propenoic acid and methyl 2-propenoate
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Parfum is a term for ingredient labelling used to identify that a product contains a material or a combination of materials normally added to a cosmetic to produce or to mask a particular odour. According to Article 19 of the Cosmetics Regulation, 'Perfume and aromatic compositions and their raw materials shall be referred to by the terms ‘parfum’ or ‘aroma’. '
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Copolymer of acrylic acid, acrylamide, sodium acrylate, sodium acryloyldimethyltaurate monomers
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydroxyethyl Acrylate/Methoxyethyl Acrylate Copolymer is the copolymer of Hydroxyethyl Acrylate and Methoxyethyl Acrylate
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer is a copolymer of sodium acrylate and sodium acryloyldimethyl taurate monomers
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Siloxanes and silicones, dimethyl, polymers with [(dimethylphenylsilyl)oxy]- and [(ethenyldimethylsilyl)oxy]-terminated dimethyl siloxanes
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Fluorphlogopite, Mg3K[AlF2O(SiO3)3] (synthetic)
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Homopolymer of 2-methyl-1 propene
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octanoic acid, monoester with glycerol
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Aluminium hydroxide
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Silane, triethoxyoctyl-
27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sorbitan, isooctadecanoate
28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sorbitan, monododecanoate, poly(oxy-1,2-ethanediyl) derivs.
29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Disodium dihydrogen ethylenediaminetetraacetate
30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sorbitan, monooctadecanoate, poly(oxy-1,2-ethanediyl) derivs.
31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Prunus Yedoensis Leaf Extract is an extract obtained from the leaves of Prunus yedoensis, Rosaceae
32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Iron Powder is the element consisting of powdered metallic iron
33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Diiron trioxide; Ferric oxide
34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tin dioxide (CI 77861)
35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,6-Octadien-1-ol, 3,7-dimethyl-, (2E)-
36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1-Methyl-4-Isopropenylcyclohexene; dipentene
37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Silicon dioxide
Products in the same category that share this formula's distinguishing ingredients.
Heimish
Shares 7 key ingredients with Cherry Blossom Glow Tone-Up Cream: Water, Glycerin, Propanediol, Dimethicone, Niacinamide
Missha
Shares 7 key ingredients with Cherry Blossom Glow Tone-Up Cream: Water, Glycerin, Propanediol, Diisostearyl Malate, Niacinamide
Aestura
Shares 7 key ingredients with Cherry Blossom Glow Tone-Up Cream: Water, Glycerin, Dimethicone, Propanediol, Niacinamide
Dr. Ceuracle
Shares 7 key ingredients with Cherry Blossom Glow Tone-Up Cream: Water, Propanediol, Glycerin, Betaine, Dicaprylyl Carbonate
Dr.Melaxin
Shares 6 key ingredients with Cherry Blossom Glow Tone-Up Cream: Water, Glycerin, Niacinamide, Dicaprylyl Carbonate, Betaine
Aestura
Shares 6 key ingredients with Cherry Blossom Glow Tone-Up Cream: Water, Dicaprylyl Carbonate, Dimethicone, Betaine, Niacinamide
WATER, DIMETHICONE, PROPANEDIOL, GLYCERIN, DICAPRYLYL CARBONATE, TITANIUM DIOXIDE, CI 77891, POLYSORBATE 80, NIACINAMIDE, 1,2-HEXANEDIOL, BETAINE, DIISOSTEARYL MALATE, TRISILOXANE, AMMONIUM ACRYLOYLDIMETHYLTAURATE CROSSPOLYMER, VP/VINYL CAPROLACTAM/DMAPA ACRYLATES COPOLYMER, PARFUM, POLYACRYLATE-13, HYDROXYETHYL ACRYLATE/METHOXYETHYL ACRYLATE COPOLYMER, SODIUM ACRYLATE/SODIUM ACRYLOYLDIMETHYL TAURATE COPOLYMER, DIMETHICONE/PHENYL VINYL DIMETHICONE CROSSPOLYMER, SYNTHETIC FLUORPHLOGOPITE, POLYISOBUTENE, GLYCERYL CAPRYLATE, ALUMINUM HYDROXIDE, ETHYLHEXYLGLYCERIN, TRIETHOXYCAPRYLYLSILANE, SORBITAN ISOSTEARATE, POLYSORBATE 20, DISODIUM EDTA, POLYSORBATE 60, PRUNUS YEDOENSIS LEAF EXTRACT, IRON POWDER, CI 77491, TIN OXIDE, GERANIOL, LIMONENE, TOCOPHEROL, SILICA.
NIACINAMIDE.
Apply at the last stage of your skin care routine. Spread a generous amount of cream on the face, neck, and upper chest area. Massage gently into the skin for better absorption.
Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry) skin.
Some ingredients here carry irritation flags, so sensitive skin should patch test on the jawline for a few days before applying it to the whole face.
5 ingredients could feed malassezia: Polysorbate 80, Glyceryl Caprylate, Sorbitan Isostearate, Polysorbate 20, Polysorbate 60. That describes the yeast's food supply, not a prediction that they will cause a breakout.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
No — it contains Parfum, Geraniol, Limonene.
No. Reading the full ingredient list, this formula is no drying alcohol.
No — it contains Dimethicone, Trisiloxane, Dimethicone/phenyl Vinyl Dimethicone Crosspolymer.
Yes — it contains Geraniol, Limonene.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.
Use it morning and evening, after serums.
It lists 38 ingredients, of which 2 are recorded as actives.
innisfree, a brand based in Korea.
It filters UV with Titanium Dioxide (titanium dioxide).
Not in the strictest sense. Its filters stop short of UVA I (340–400 nm), the deepest ageing wavelengths.
Possibly. It filters with mineral UV filters, which sit on the surface and can leave a visible cast on deeper skin tones, especially at high SPF.
It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.
Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.
Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect