JUMISO Waterfull Hyaluronic Sunscreen SPF50+ PA++++

JUMISO

Waterfull Hyaluronic Sunscreen SPF50+ PA++++

face sunscreen

Added Last edited

Fit by skin type

General, ingredient-based — not your personalized match.

Dry
52%
Combination (dry)
52%
Balanced
82%
Combination (oily)
88%
Oily
88%

See how this fits your skin

Take the skin test and I'll show you how suitable this product is for you.

Take the skin test
34
Ingredients
5
Benefits
2
Actives
Find Dupes

The JUMISO Waterfull Hyaluronic Sunscreen SPF50+ PA++++ is a moisturizing hybrid sunscreen that blocks both UVA/UVB rays and evens skin tone. Formulated as a water-based sunscreen for all skin types. This formulation is vegan certificated.

Key Insights

Benefits

5
Anti-Aging
Hydration
Oil Control
Pore Minimizer
Soothing

Active Ingredients

2
Hyaluronic acid Vitamin B3 (niacinamide)

Risks

3
Alcohol
Microplastic
Synthetic polymer

About Waterfull Hyaluronic Sunscreen SPF50+ PA++++

Overview

Waterfull Hyaluronic Sunscreen SPF50+ PA++++ is a lightweight sunscreen from JUMISO. It is rated SPF 50+ PA++++, meaning it is tested to the top of both the UVB and the UVA scales used in Asia. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 34 ingredients, each broken down in full below.

Texture and finish

By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Glycerin, Butylene Glycol and Hyaluronic Acid, humectants that pull water into the upper layers of skin rather than sealing it there.

UV filter system

It uses a hybrid filter system — Titanium Dioxide, Uvinul A Plus, Tinosorb S, Uvinul T 150, Parsol SLX and Mexoryl SX — combining mineral and organic filters. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.

What the formula does

Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Glycerin, Butylene Glycol, Hyaluronic Acid and Ethylhexylglycerin.

Soothing: Moderate. Ingredients aimed at visible redness and reactivity, and here that comes from Phenethyl Benzoate, Isononyl Isononanoate, Diethylamino Hydroxybenzoyl Hexyl Benzoate and Niacinamide.

Who it suits

On richness alone it suits Balanced, Combination (oily) and Oily skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.

What it does not target

The formula contributes little or nothing on barrier support, antioxidant protection, brightening and tone and cell renewal. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.

What is not in it

Reading the full list, the formula is fragrance-free, essential-oil-free, no drying alcohol, paraben-free, sulfate-free and dye-free. Those claims come from the ingredient list itself, not from the packaging.

Where it fits in a routine

Use it in the morning. In a routine it goes final morning step, before makeup. Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms. Reapply every two hours of sun exposure, and after swimming or towelling off. Let it set for a couple of minutes before makeup so it does not pill.

This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.

Pros and cons

Drawn purely from the ingredient list

Pros

  • Broad-spectrum coverage that reaches into UVA I
  • Every UV filter in it is photostable
  • No fragrance or declared allergens
  • No essential oils
  • No drying alcohol
  • Strong humectant content for hydration
  • No common irritants flagged in the list

Things to know

  • Contains a solid synthetic polymer (microplastic)
  • 2 ingredients could feed malassezia (fungal acne)

Which skin types it suits

Scored on how rich or light the formula reads from its INCI order.

Suitable for

  • Balanced skin
  • Combination (oily) skin
  • Oily skin

Less suitable for

  • Dry skin
  • Combination (dry) skin

Sensitive skin

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Skin concerns

Based on the curated benefits documented for this product's ingredients.

Helps with

  • Anti-Aging 11 ingredients

    Boosts collagen and cell turnover to reduce fine lines and wrinkles

  • Hydration 10 ingredients

    Attracts and locks in moisture to keep skin plump and dewy

  • Oil Control 3 ingredients

    Regulates sebum production to reduce shine and greasiness

  • Soothing 2 ingredients

    Calms redness, irritation, and inflammation for sensitive skin

  • Pore Minimizer 1 ingredient

    Tightens and refines the look of enlarged pores

Does not target

Anti-Acne Blackhead Reducing Dark Spot Fading Evens Skin Tone Smooths Bumpy Skin

None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.

UV filters

Hybrid mineral and organic filter system · broad-spectrum through UVA I

Titanium Dioxide

titanium dioxide
Protects from
UVB (290–320 nm), UVA II (320–340 nm)
Photostable
Yes — photostable
Generation
Mineral (inorganic) filter
Approved in
Approved worldwide
Maximum permitted level
Up to 25% (EU, US, KR)

Strong UVB and short-UVA protection, but it stops before UVA I — a mineral formula leaning on titanium dioxide alone needs zinc oxide beside it for deep UVA.

Uvinul A Plus

diethylamino hydroxybenzoyl hexyl benzoate
Protects from
UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation UVA filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

A photostable replacement for avobenzone: it peaks at 354 nm, deep in UVA I, and does not need a stabiliser to survive the day.

Tinosorb S

bis-ethylhexyloxyphenol methoxyphenyl triazine
Protects from
UVB (290–320 nm), UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation broad-spectrum filter
Approved in
EU, UK, Korea, Japan, Australia — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

One of the most photostable filters in use, and it stabilises avobenzone and octinoxate alongside it. Oil-soluble, cosmetically light, no white cast.

Uvinul T 150

ethylhexyl triazone
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
Next-generation UVB filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 5% (EU)

The most efficient UVB absorber available by weight, which is why high-SPF formulas reach SPF 50+ without feeling heavy. Contributes nothing to UVA.

Parsol SLX

polysilicone-15
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
Polymeric UVB filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

A polymer, so it stays on the surface of skin rather than penetrating — low irritation potential and no measurable systemic absorption.

Mexoryl SX

terephthalylidene dicamphor sulfonic acid
Protects from
UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation UVA filter
Approved in
EU, UK, Korea, Japan — US approval limited to specific products
Maximum permitted level
Up to 10% (EU)

Water-soluble UVA filter, which is unusual — most UVA filters are oil-soluble.

Key ingredients

The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.

1st on the list, which puts it at an estimated 30–80% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration

3rd on the list, which puts it at an estimated 5–20% of the formula.

Dibutyl adipate

Hydration

5th on the list, which puts it at an estimated 2–10% of the formula.

Titanium dioxide (CI 77891)

Anti-Aging

9th on the list, which puts it at an estimated 1–5% of the formula.

Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane

Hydration Anti-Aging
Niacinamide Vitamin B3 (niacinamide)

10th on the list, which puts it at an estimated 1–5% of the formula.

Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**

Soothing Anti-Aging Pore Minimizer

12th on the list, which puts it at an estimated 1–3% of the formula.

Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone

Anti-Aging

13th on the list, which puts it at an estimated 1–3% of the formula.

Azacyclotridecan-2-one, homopolymer

Oil Control

14th on the list, which puts it at an estimated 1–3% of the formula.

Polysilicone-15 is the siloxane polymer that conforms generally to the formula:

Anti-Aging

15th on the list, which puts it at an estimated 1–3% of the formula.

3,3'-(1,4-Phenylenedimethylene)bis[7,7-dimethyl-2-oxo-bicyclo[2.2.1]heptane-1-methanesulfonic acid]

Anti-Aging

18th on the list, which puts it at an estimated 1–3% of the formula.

Silicon dioxide

Oil Control

Formula analysis

Each axis is scored from the ingredients present and how high up the list they sit.

Hydration High

Ingredients that pull and hold water in the upper layers of skin

Barrier support None

Lipids and repair signals that support skin barrier integrity

Antioxidant support None

Ingredients that mop up free radicals from UV and pollution

Oil control Low

Ingredients that moderate sebum or absorb shine

Brightening None

Ingredients that act on uneven tone and post-inflammatory marks

Soothing Moderate

Ingredients aimed at visible redness and reactivity

Cell renewal None

Retinoids, acids and enzymes that speed surface turnover

Firmness signalling None

Peptides and growth factors that signal for collagen support

Photostability Very high

Every filter in this formula is photostable

Active and supporting ingredients

"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.

Supporting ingredients (24)

Solvents, emollients, texture agents and preservatives — the formula that carries the actives.

Water Dipropylene Glycol Dibutyl Adipate Phenethyl Benzoate Isononyl Isononanoate Coco-caprylate/caprate Glycerin Nylon-12 Polyglyceryl-3 Methylglucose Distearate Polyhydroxystearic Acid Silica Tromethamine Sodium Acrylates Crosspolymer-2 Hydroxyethyl Acrylate/sodium Acryloyldimethyl Taurate Copolymer Aluminum Hydroxide Hydroxyacetophenone Stearic Acid Sodium Polyacryloyldimethyl Taurate Polyacrylate Crosspolymer-6 Polyglyceryl-2 Dipolyhydroxystearate Disodium Edta-copper T-butyl Alcohol Butylene Glycol Ethylhexylglycerin

What is and is not in it

Read from the full ingredient list. A brand's own claim may differ.

Free from

  • Fragrance-free
  • Essential-oil-free
  • No drying alcohol
  • Paraben-free
  • Sulfate-free
  • Dye-free
  • Oil-free
  • No animal-derived ingredients

Contains

  • Silicones

    Polysilicone-15

  • Microplastics

    Nylon-12

What to layer it with

Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.

Compatible with

  • Vitamin C (L-ascorbic acid)
  • Retinoids (retinol, retinal)
  • AHAs (glycolic, lactic)
  • BHA (salicylic acid)
  • PHAs (gluconolactone)
  • Benzoyl peroxide
  • Azelaic acid
  • Copper peptides
  • Bakuchiol
  • Niacinamide
  • Hyaluronic acid
  • Ceramides
  • Signal peptides
  • Panthenol
  • Sunscreen

Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.

Where it fits in a routine

Morning
  1. Cleanse
  2. Toning
  3. Treat
  4. Moisturise
  5. Protect

This product is the "Protect" step.

  • Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms.
  • Reapply every two hours of sun exposure, and after swimming or towelling off.
  • Let it set for a couple of minutes before makeup so it does not pill.

Safety and suitability

Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.

Pregnancy and breastfeeding
Nothing in this formula is on the standard pregnancy-caution list. That is not clearance — ask your doctor about anything you use daily.
Fungal acne (malassezia)
2 ingredients could feed malassezia: Polyglyceryl-3 Methylglucose Distearate, Polyglyceryl-2 Dipolyhydroxystearate. That is about the yeast's food supply, not a prediction that you will break out.
Sensitive and reactive skin
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Recorded ingredient risks
Alcohol, Microplastic, Synthetic polymer

Ingredients by function

Most ingredients do more than one job, so these counts add up to more than the 34 ingredients on the label.

11
Texture agent

Sets the thickness, spread and stability of the formula

6
Humectant

Draws water into the upper layers of skin

6
Emollient

Softens and smooths by filling gaps between skin cells

6
Solvent

Dissolves and carries everything else

6
UV filter

Absorbs or scatters ultraviolet light

4
Active

Changes how skin behaves rather than how it feels

3
Occlusive

Forms a film that slows water loss

3
Surfactant

Lifts oil and dirt, or holds oil and water together

1
Antioxidant

Neutralises free radicals from UV and pollution

1
Chelator

Binds trace metals that would otherwise spoil the formula

1
Exfoliant

Loosens or dissolves dead surface cells

1
pH adjuster

Sets the acidity the formula needs to work

Ingredient breakdown

Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.

1 Water Solvent
Estimated level
30–80%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

1st on the list, which puts it at an estimated 30–80% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration
3 scientific references
  • Skin Research and Technology, May 2015, pages 131-136
  • Skin Pharmacology and Applied Skin Physiology, November-December 1999, pages 344-351
  • Journal of Cosmetic Science, September-October 1993, pages 249-262
2 Dipropylene Glycol Texture agent
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent, Solvent

2nd on the list, which puts it at an estimated 5–20% of the formula.

1,1'-Oxydipropan-2-ol; Oxydipropan-2-ol; Hydroxypropyloxypropanol

3 Dibutyl Adipate Emollient
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Occlusive, Solvent

3rd on the list, which puts it at an estimated 5–20% of the formula.

Dibutyl adipate

Hydration
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

4th on the list, which puts it at an estimated 2–10% of the formula.

Benzoic acid, 2-phenylethyl ester

5 Titanium Dioxide UV filter
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter, Texture agent

5th on the list, which puts it at an estimated 2–10% of the formula.

Titanium dioxide (CI 77891)

Anti-Aging
10 scientific references
  • Journal of Cosmetic Dermatology, February 2021, pages 532-537
  • Frontiers in Bioengineering and Biotechnology, June 2020
  • Journal of Nanoparticle Research, March 2020
  • Journal of the European Academy of Dermatology and Venereology, November 2019, pages 34-46
  • Photodermatology, Photoimmunology and Photomedicine, November 2019, pages 442-446
  • Journal of Cosmetic Science, September 2019, pages 223-234
  • Materials, July 2019, pages 1-24
  • Photodermatology, Photoimmunology, and Photomedicine, April 2011, pages 58-67
  • Skin Therapy Letter, July-August 2008, pages 5-7
  • Environmental and Health Perspectives, July 2008, pages 893
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

6th on the list, which puts it at an estimated 2–10% of the formula.

3,5,5-Trimethylhexyl 3,5,5-trimethylhexanoate

Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

7th on the list, which puts it at an estimated 1–5% of the formula.

Alcohols, coco, mixed esters with octanoic and decanoic acids

Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

8th on the list, which puts it at an estimated 1–5% of the formula.

Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester

Anti-Aging
9 Glycerin Humectant
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Occlusive, Texture agent, Solvent

9th on the list, which puts it at an estimated 1–5% of the formula.

Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane

Hydration Anti-Aging
6 scientific references
  • Journal of Pharmaceutical Investigation, March 2021, pages 223-231
  • International Journal of Toxicology, November/December 2019, Volume 38, Supplement 3, pages 6S-22S
  • International Journal of Cosmetic Science, August 2016, ePublication
  • British Journal of Dermatology, July 2008, pages 23-34
  • Journal of Cosmetic Dermatology, June 2007, pages 75-82
  • Proceedings of the National Academy of Sciences, June 2003, pages 7, 360-7, 365
10 Niacinamide Active
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Active

10th on the list, which puts it at an estimated 1–5% of the formula.

Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**

Soothing Anti-Aging Pore Minimizer
15 scientific references
  • International Journal of Dermatology, February 2021, pages 166-173
  • Biomolecules & Therapeutics, July 2019, pages 562-569
  • Experimental Dermatology, February 2019, pages 15-22
  • Dermatologic Therapy, September 2017, ePublication
  • Journal of Investigative Dermatology, May 2017, page S116
  • International Journal of Pharmaceutics, March 2017, pages 158-162
  • Facial Plastic Surgery Clinics of North America, May 2016, pages 145-152
  • Clinical, Cosmetic, and Investigational Dermatology, July 2015, pages 405-412
  • Skin Pharmacology and Physiology, June 2014, pages 311-315
  • International Journal of Pharmacy, January 2013, pages 192-201
  • Dermatoendrocrinology, July 2012, pages 308-319
  • International Journal of Toxicology, September 2005, pages 1-31
  • Dermatologic Surgery, July 2005, pages 860-865
  • International Journal of Cosmetic Science, October 2004, pages 231-238
  • Journal of Cosmetic Dermatology, April 2004, pages 88-93
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

11th on the list, which puts it at an estimated 1–3% of the formula.

2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]

Anti-Aging
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

12th on the list, which puts it at an estimated 1–3% of the formula.

Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone

Anti-Aging
13 Nylon-12 Texture agent
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

13th on the list, which puts it at an estimated 1–3% of the formula.

Azacyclotridecan-2-one, homopolymer

Oil Control Microplastic
14 Polysilicone-15 UV filter
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

14th on the list, which puts it at an estimated 1–3% of the formula.

Polysilicone-15 is the siloxane polymer that conforms generally to the formula:

Anti-Aging
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

15th on the list, which puts it at an estimated 1–3% of the formula.

3,3'-(1,4-Phenylenedimethylene)bis[7,7-dimethyl-2-oxo-bicyclo[2.2.1]heptane-1-methanesulfonic acid]

Anti-Aging
8 scientific references
  • 5 Super Anti-Aging Antioxidants Your Skin Needs
  • How to Keep Your Neck & Chest Looking Young
  • Acne & Aging Skin
  • How to Diminish Uneven Skin Tone and Get Your Glow Back
  • What Are Peptides and What Do They Do for Skin?
  • The Truth About Firming Creams
  • Top 5 Reasons to Add Antioxidants to Your Skin Care Routine
  • Anti-Aging Superstars
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant

16th on the list, which puts it at an estimated 1–3% of the formula.

Methyl-D-glucopyranoside, ethers with 1,2,3-propanetriol homopolymer, octadecanoates (1:1:2) (3 mol glycerol average molar ratio)

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant

17th on the list, which puts it at an estimated 1–3% of the formula.

12-Hydroxyoctadecanoic acid, homopolymer

18 Silica Exfoliant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Exfoliant, Texture agent

18th on the list, which puts it at an estimated 1–3% of the formula.

Silicon dioxide

Oil Control
6 scientific references
  • Advances in Colloid and Interface Science, July 2021, page 10, 2437
  • Cosmetic Ingredient Review, October 2019, pages 1-34
  • Nanomedicine, August 2019, pages 2, 243-2, 267
  • Biological and Pharmaceutical Bulletin, 2016, pages 1, 201-1, 205
  • European Journal of Pharmaceutics and Biopharmaceutics, January 2015, pages 116-125
  • Cosmetics & Toiletries, April 2015, pages 36-45
19 Tromethamine pH adjuster
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
pH adjuster

19th on the list, which puts it at an estimated 1–3% of the formula.

1,3-Propanediol, 2-amino-2-(hydroxymethyl)-

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line

20th on the list, which puts it at an estimated 1–3% of the formula.

Sodium Acrylates Crosspolymer-2 is the sodium salt of a copolymer of acrylic acid, methacrylic acid or one or more of its simple esters crosslinked with ethylene diglycidyl ether

Synthetic polymer
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

21st on the list, which puts it at an estimated 1–3% of the formula.

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer is a copolymer of sodium hydroxyethyl acrylate and acryloyldimethyl taurate monomers

Synthetic polymer
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Emollient, Occlusive, Texture agent

22nd on the list, which puts it at an estimated 1–3% of the formula.

Aluminium hydroxide

Oil Control
8 scientific references
  • Oil-Absorbing Ingredients
  • Help for Oily Skin
  • Salicylic Acid for Skin
  • How BHA Exfoliants Work
  • Which BHA Exfoliant is Right for Me?
  • Niacinamide Benefits: What Does Niacinamide Do for Skin?
  • The Best Toners for Oily Skin
  • The Best Moisturizers for Oily, Acne-Prone Skin
23 Hydroxyacetophenone Antioxidant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Antioxidant

23rd on the list, which puts it at an estimated 1–3% of the formula.

Ethanone, 1-(4-hydroxyphenyl)-,p-Hydroxyacetophenone

Anti-Aging Hydration
4 scientific references
  • Journal of Oleo Science, February 2019, pages 183-191
  • Applied Environmental Microbiology, June 2018, ePublication
  • Journal of Biosciences, May-June 2004, pages 345-353
  • Scientific Reports, April 2021, pages 1–7
24 Stearic Acid Emollient
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Surfactant, Texture agent

24th on the list, which puts it at an estimated 1–3% of the formula.

Stearic acid

Hydration
4 scientific references
  • Cosmetic Ingredient Review, May 2019, pages 1-61
  • International Journal of Cosmetic Science, August 2008, page 310
  • Therapeutics for the Clinician, May 2005, pages 317-324
  • Journal of Cosmetic Science, December 2003, pages 559-568
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

25th on the list, which puts it at an estimated 1–3% of the formula.

2,2-Dimethyl-2-(2'-propenamido)ethanesulfonic acid, sodium salt, homopolymer

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

26th on the list, which puts it at an estimated 1–3% of the formula.

Polyacrylate Crosspolymer-6 is a copolymer of ammonium acryloyldimethyltaurate, dimethylacrylamide, lauryl methacrylate and laureth-4 methacrylate, crosslinked with trimethylolpropane triacrylate

Synthetic polymer
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line

27th on the list, which puts it at an estimated 1–3% of the formula.

Octadecanoic acid, 12-hydroxy-, homopolymer, ester with oxybis(propanediol)

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Chelator

28th on the list, which puts it at an estimated 1–3% of the formula.

Disodium [[N,N'-ethylenebis[N-(carboxymethyl)glycinato]](4-)-N,N',O,O',ON,ON']cuprate(2-)

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

29th on the list, which puts it at an estimated 1–3% of the formula.

2-Methylpropan-2-ol

Alcohol
30 Butylene Glycol Humectant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Texture agent, Solvent

30th on the list, which puts it at an estimated 1–3% of the formula.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration
5 scientific references
  • CosmeticsInfoorg, Accessed March 2021, ePublication
  • US Food and Drug Administration Code of Federal Regulations</em>, Accessed March 2021, ePublication
  • International Journal of Toxicology, May 2011, pages 5S-16S
  • Skin Research and Technology, November 2007, pages 417-24
  • Journal of the American College of Toxicology, September 1985, pages 223-248
31 Hyaluronic Acid Humectant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Active

31st on the list, which puts it at an estimated 1–3% of the formula.

Hyaluronic acid

Anti-Aging Hydration
5 scientific references
  • Journal of Evidence-Based, Complementary and Alternative Medicine, October 2017, pages 816-823
  • Journal of Medicinal Food, October 2016, pages 1, 172-1, 179
  • Nutrition Journal, July 2013, ePublication
  • Journal of Drugs in Dermatology, 2011, issue 9, pages 990-1000
  • Journal of Clinical and Aesthetic Dermatology, March 2009, pages 38-43
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Propanediol, 3-(2-ethylhexyloxy)

Hydration
5 scientific references
  • PLoS One, October 2016, ePublication
  • Contact Dermatitis, May 2016, pages 281-288
  • International Journal of Toxicology, September 2013, pages 5S-21S
  • Personal Care, 2008, pages 1-4
  • Cosmetic Science Technology, 2006, pages 1-11
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Active

33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Hydrolyzed Hyaluronic Acid is the hydrolysate of Hyaluronic Acid derived by acid, enzyme or other method of hydrolysis

Hydration
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Active

34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Hyaluronic acid, sodium, salt

Hydration Anti-Aging Soothing
5 scientific references
  • Der Hautarzt; Zeitschrift fur Dermatologie, Venerologie, und Verwandte Gebiete, December 2017, pages 987-993
  • Journal of Cosmetic Dermatology, July 2014, pages 277-287
  • Journal of Clinical and Aesthetic Dermatology, October 2012, pages 20-23
  • DermatoEndocrinology, July-December 2012, pages 253-258
  • Journal of Drugs in Dermatology, September 2011, pages 990-1000

People also compare

Products in the same category that share this formula's distinguishing ingredients.

Black Bamboo Top-to-Toe SPF Veil

Haruharu Wonder

Shares 12 key ingredients with Waterfull Hyaluronic Sunscreen SPF50+ PA++++: Water, Ethylhexyl Triazone, Dibutyl Adipate, Terephthalylidene Dicamphor Sulfonic Acid, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine

Black Bamboo Top-to-Toe SPF Veil SPF 50+ PA++++

Haruharu Wonder

Shares 12 key ingredients with Waterfull Hyaluronic Sunscreen SPF50+ PA++++: Water, Ethylhexyl Triazone, Dibutyl Adipate, Terephthalylidene Dicamphor Sulfonic Acid, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine

Hyal Reyouth Moist Sun

Dr. Ceuracle

Shares 12 key ingredients with Waterfull Hyaluronic Sunscreen SPF50+ PA++++: Water, Dibutyl Adipate, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid, Niacinamide

Hyal Reyouth Moist Sun SPF50+ PA++++

Dr. Ceuracle

Shares 12 key ingredients with Waterfull Hyaluronic Sunscreen SPF50+ PA++++: Water, Dibutyl Adipate, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid, Niacinamide

Frequently asked questions

What ingredients are in Waterfull Hyaluronic Sunscreen SPF50+ PA++++?

WATER, DIPROPYLENE GLYCOL, DIBUTYL ADIPATE, PHENETHYL BENZOATE, TITANIUM DIOXIDE, ISONONYL ISONONANOATE, COCO-CAPRYLATE/CAPRATE, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE, GLYCERIN, NIACINAMIDE, BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE, ETHYLHEXYL TRIAZONE, NYLON-12, POLYSILICONE-15, TEREPHTHALYLIDENE DICAMPHOR SULFONIC ACID, POLYGLYCERYL-3 METHYLGLUCOSE DISTEARATE, POLYHYDROXYSTEARIC ACID, SILICA, TROMETHAMINE, SODIUM ACRYLATES CROSSPOLYMER-2, HYDROXYETHYL ACRYLATE/SODIUM ACRYLOYLDIMETHYL TAURATE COPOLYMER, ALUMINUM HYDROXIDE, HYDROXYACETOPHENONE, STEARIC ACID, SODIUM POLYACRYLOYLDIMETHYL TAURATE, POLYACRYLATE CROSSPOLYMER-6, POLYGLYCERYL-2 DIPOLYHYDROXYSTEARATE, DISODIUM EDTA-COPPER, T-BUTYL ALCOHOL, BUTYLENE GLYCOL, HYALURONIC ACID, ETHYLHEXYLGLYCERIN, HYDROLYZED HYALURONIC ACID, SODIUM HYALURONATE.

What are the active ingredients in Waterfull Hyaluronic Sunscreen SPF50+ PA++++?

NIACINAMIDE, HYALURONIC ACID, HYDROLYZED HYALURONIC ACID, SODIUM HYALURONATE.

How do I use Waterfull Hyaluronic Sunscreen SPF50+ PA++++?

At the last stage of skin care, apply a suitable amount onto the face and gently tap it. Reapply every two hours for optimum sun protection.

What skin types is Waterfull Hyaluronic Sunscreen SPF50+ PA++++ good for?

Judged on how rich the formula reads from its ingredient list, it suits Balanced, Combination (oily), Oily skin best. It is the least natural fit for Dry, Combination (dry) skin.

Is Waterfull Hyaluronic Sunscreen SPF50+ PA++++ good for sensitive skin?

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Is Waterfull Hyaluronic Sunscreen SPF50+ PA++++ fungal acne safe?

2 ingredients could feed malassezia: Polyglyceryl-3 Methylglucose Distearate, Polyglyceryl-2 Dipolyhydroxystearate. That describes the yeast's food supply, not a prediction that they will cause a breakout.

Can I use Waterfull Hyaluronic Sunscreen SPF50+ PA++++ while pregnant?

Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.

Is Waterfull Hyaluronic Sunscreen SPF50+ PA++++ fragrance free?

Yes. Reading the full ingredient list, this formula is fragrance-free.

Does Waterfull Hyaluronic Sunscreen SPF50+ PA++++ contain alcohol?

No. Reading the full ingredient list, this formula is no drying alcohol.

Is Waterfull Hyaluronic Sunscreen SPF50+ PA++++ silicone free?

No — it contains Polysilicone-15.

Does Waterfull Hyaluronic Sunscreen SPF50+ PA++++ contain essential oils?

No. Reading the full ingredient list, this formula is essential-oil-free.

Is Waterfull Hyaluronic Sunscreen SPF50+ PA++++ paraben free?

Yes. Reading the full ingredient list, this formula is paraben-free.

What can I layer with Waterfull Hyaluronic Sunscreen SPF50+ PA++++?

It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.

When should I apply Waterfull Hyaluronic Sunscreen SPF50+ PA++++?

Use it in the morning, final morning step, before makeup.

How many ingredients does Waterfull Hyaluronic Sunscreen SPF50+ PA++++ have?

It lists 34 ingredients, of which 10 are recorded as actives.

Who makes Waterfull Hyaluronic Sunscreen SPF50+ PA++++?

JUMISO.

What UV filters are in Waterfull Hyaluronic Sunscreen SPF50+ PA++++?

It filters UV with Titanium Dioxide (titanium dioxide), Uvinul A Plus (diethylamino hydroxybenzoyl hexyl benzoate), Tinosorb S (bis-ethylhexyloxyphenol methoxyphenyl triazine), Uvinul T 150 (ethylhexyl triazone), Parsol SLX (polysilicone-15), Mexoryl SX (terephthalylidene dicamphor sulfonic acid).

Is Waterfull Hyaluronic Sunscreen SPF50+ PA++++ broad spectrum?

Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.

Does Waterfull Hyaluronic Sunscreen SPF50+ PA++++ leave a white cast?

It may leave a slight cast. The formula mixes mineral and organic filters, so any cast is usually lighter than a fully mineral sunscreen's.

Is Waterfull Hyaluronic Sunscreen SPF50+ PA++++ reef safe?

It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.

Can I wear Waterfull Hyaluronic Sunscreen SPF50+ PA++++ under makeup?

Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.

How often should I reapply Waterfull Hyaluronic Sunscreen SPF50+ PA++++?

Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.

Brand
JUMISO

Reviews

0 total

Log in to leave a review.

No reviews yet. Be the first to share your thoughts.