Dr. Ceuracle
Hyal Reyouth Moist Sun
face sunscreen
Dr. Ceuracle
face sunscreen
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testThe Dr. Ceuracle Hyal Reyouth Moist Sun is a great SPF50+ PA++++ organic sunscreen that goes beyond mere sun protection. Enriched with a powerful blend of fructan and ten types of hyaluronic acid, this sunscreen not only shields your skin from harmful UV rays but also works tirelessly to infuse your skin with deep, lasting moisture.
Hyal Reyouth Moist Sun is a lightweight sunscreen from Dr. Ceuracle, a brand based in Korea. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 42 ingredients, each broken down in full below.
By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Propanediol, Glycerin and Sodium Hyaluronate, humectants that pull water into the upper layers of skin rather than sealing it there.
It is a chemical (organic-filter) sunscreen, using Uvinul T 150, Mexoryl SX, Parsol SLX, Uvinul A Plus and Tinosorb S. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.
Hydration: Very high. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Propanediol, Glycerin, Sodium Hyaluronate and Ethylhexylglycerin.
Soothing: Moderate. Ingredients aimed at visible redness and reactivity, and here that comes from Diethylamino Hydroxybenzoyl Hexyl Benzoate, Panthenol, Niacinamide and Sodium Hyaluronate.
On richness alone it suits Balanced, Combination (oily) and Oily skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on antioxidant protection, cell renewal and firmness signalling. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is essential-oil-free, no drying alcohol, paraben-free, microplastic-free, sulfate-free and dye-free. Those claims come from the ingredient list itself, not from the packaging. It does contain fragrance, worth knowing if your skin reacts to any of them.
Use it in the morning. In a routine it goes final morning step, before makeup. Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms. Reapply every two hours of sun exposure, and after swimming or towelling off. Let it set for a couple of minutes before makeup so it does not pill.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Calms redness, irritation, and inflammation for sensitive skin
Brightens and balances complexion for a more uniform appearance
Tightens and refines the look of enlarged pores
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
Chemical (organic) filter system · broad-spectrum through UVA I
The most efficient UVB absorber available by weight, which is why high-SPF formulas reach SPF 50+ without feeling heavy. Contributes nothing to UVA.
Water-soluble UVA filter, which is unusual — most UVA filters are oil-soluble.
A polymer, so it stays on the surface of skin rather than penetrating — low irritation potential and no measurable systemic absorption.
A photostable replacement for avobenzone: it peaks at 354 nm, deep in UVA I, and does not need a stabiliser to survive the day.
One of the most photostable filters in use, and it stabilises avobenzone and octinoxate alongside it. Oil-soluble, cosmetically light, no white cast.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Dibutyl adipate
3rd on the list, which puts it at an estimated 5–20% of the formula.
1,3-dihydroxypropane
4th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.
Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone
5th on the list, which puts it at an estimated 2–10% of the formula.
3,3'-(1,4-Phenylenedimethylene)bis[7,7-dimethyl-2-oxo-bicyclo[2.2.1]heptane-1-methanesulfonic acid]
7th on the list, which puts it at an estimated 1–5% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Dihydroxypentane
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polysilicone-15 is the siloxane polymer that conforms generally to the formula:
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Alcohols, C16-18
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Stearic acid, monoester with glycerol
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
Every filter in this formula is photostable
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Parfum
Polysilicone-15
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.
This product is the "Protect" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 42 ingredients on the label.
Draws water into the upper layers of skin
Sets the thickness, spread and stability of the formula
Changes how skin behaves rather than how it feels
Dissolves and carries everything else
Lifts oil and dirt, or holds oil and water together
Absorbs or scatters ultraviolet light
Softens and smooths by filling gaps between skin cells
Forms a film that slows water loss
Changes how the product smells or looks
Neutralises free radicals from UV and pollution
Sets the acidity the formula needs to work
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Dibutyl adipate
3rd on the list, which puts it at an estimated 5–20% of the formula.
1,3-dihydroxypropane
4th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.
Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone
5th on the list, which puts it at an estimated 2–10% of the formula.
3,3'-(1,4-Phenylenedimethylene)bis[7,7-dimethyl-2-oxo-bicyclo[2.2.1]heptane-1-methanesulfonic acid]
6th on the list, which puts it at an estimated 2–10% of the formula.
1,2,3-Propanetriol, homopolymer, octadecanoates (1:2) (2 mol glycerol average molar ratio)
7th on the list, which puts it at an estimated 1–5% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
8th on the list, which puts it at an estimated 1–5% of the formula.
1,3-Propanediol, 2-amino-2-(hydroxymethyl)-
9th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Dihydroxypentane
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polysilicone-15 is the siloxane polymer that conforms generally to the formula:
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Alcohols, C16-18
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Stearic acid, monoester with glycerol
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Propenoic acid, polymer with 2,2-bis(hydroxymethyl)propane-1,3-diol 2-propenyl ether
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Parfum is a term for ingredient labelling used to identify that a product contains a material or a combination of materials normally added to a cosmetic to produce or to mask a particular odour. According to Article 19 of the Cosmetics Regulation, 'Perfume and aromatic compositions and their raw materials shall be referred to by the terms ‘parfum’ or ‘aroma’. '
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ammonium Acryloyldimethyltaurate/VP Copolymer is a copolymer of ammonium acryloyldimethyltaurate and vinylpyrrolidone monomers
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2,3-Propanetricarboxylic acid, 2-hydroxy-, ester with 1,2,3-propanetriol monooctadecanoate
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Inulin Lauryl Carbamate is the product formed by the reaction of lauryl isocyanate and Inulin
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
C10-30 alkyl propenoate, polymer with propenoic acid, butenoic acidand/or alkyl propenoates, product with propenyl sucrose ether or propenyl 2,2-dihydroxymethyl-1,3-propanediol
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium hydrogen N-(1-oxooctadecyl)-L-glutamate
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium, salt
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
6-Amino-9-beta-D-ribofuranosyl-9H-purine
27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Methyl-1,3-propanediol
28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Copolymer of PEG-180, dodoxynol-5, PEG-25 tristyrylphenol and tetramethoxymethylglycouril monomers
29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol
30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Biosaccharide Gum-1 is a fermentation gum derived from sorbitol. It is described as a polymer of α-L-fucose-1|->|3-α- D-galactose-1|->|3-α-D-galacturonic acid trisaccharides
32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Fructan is a homopolymer of fructose
33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Hyaluronic Acid is the hydrolysate of Hyaluronic Acid derived by acid, enzyme or other method of hydrolysis
35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Sodium Hyaluronate is the hydrolysate of Sodium Hyaluronate derived by acid, enzyme or other method of hydrolysis
36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Dimethylsilanol Hyaluronate is the ester of dimethylsilanol and hyaluronic acid.
37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid
38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, potassium salt
39th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, 2-hydroxy-3-(N,N,N-trimethylammonio)propyl chloride derivatives
40th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium salt, polymer with 1,1'-sulfonylbis[ethene]
41st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium Acetylhyaluronate
42nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium salt, compd. with dimethylsilanediol
Products in the same category that share this formula's distinguishing ingredients.
Dr. Ceuracle
Shares 19 key ingredients with Hyal Reyouth Moist Sun: Water, Dibutyl Adipate, Propanediol, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid
Haruharu Wonder
Shares 15 key ingredients with Hyal Reyouth Moist Sun: Water, Ethylhexyl Triazone, Dibutyl Adipate, Terephthalylidene Dicamphor Sulfonic Acid, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine
Haruharu Wonder
Shares 15 key ingredients with Hyal Reyouth Moist Sun: Water, Ethylhexyl Triazone, Dibutyl Adipate, Terephthalylidene Dicamphor Sulfonic Acid, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine
Torriden
Shares 14 key ingredients with Hyal Reyouth Moist Sun: Water, Dibutyl Adipate, Propanediol, Ethylhexyl Triazone, Diethylamino Hydroxybenzoyl Hexyl Benzoate
Missha
Shares 14 key ingredients with Hyal Reyouth Moist Sun: Water, Dibutyl Adipate, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine, Ethylhexyl Triazone
KAINE
Shares 13 key ingredients with Hyal Reyouth Moist Sun: Water, Dibutyl Adipate, Propanediol, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Panthenol
WATER, DIBUTYL ADIPATE, PROPANEDIOL, ETHYLHEXYL TRIAZONE, TEREPHTHALYLIDENE DICAMPHOR SULFONIC ACID, POLYGLYCERYL-3 DISTEARATE, NIACINAMIDE, TROMETHAMINE, 1,2-HEXANEDIOL, PENTYLENE GLYCOL, POLYSILICONE-15, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE, CETEARYL ALCOHOL, GLYCERYL STEARATE, BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE, GLYCERIN, CARBOMER, PARFUM, AMMONIUM ACRYLOYLDIMETHYLTAURATE/VP COPOLYMER, GLYCERYL STEARATE CITRATE, INULIN LAURYL CARBAMATE, ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER, SODIUM STEAROYL GLUTAMATE, SODIUM HYALURONATE, ETHYLHEXYLGLYCERIN, ADENOSINE, METHYLPROPANEDIOL, POLYETHER-1, PANTHENOL, TOCOPHEROL, BIOSACCHARIDE GUM-1, FRUCTAN, BUTYLENE GLYCOL, HYDROLYZED HYALURONIC ACID, HYDROLYZED SODIUM HYALURONATE, DIMETHYLSILANOL HYALURONATE, HYALURONIC ACID, POTASSIUM HYALURONATE, HYDROXYPROPYLTRIMONIUM HYALURONATE, SODIUM HYALURONATE CROSSPOLYMER, SODIUM ACETYLATED HYALURONATE, SODIUM HYALURONATE DIMETHYLSILANOL.
NIACINAMIDE, SODIUM HYALURONATE, PANTHENOL, HYDROLYZED HYALURONIC ACID, HYALURONIC ACID, POTASSIUM HYALURONATE, SODIUM HYALURONATE CROSSPOLYMER, SODIUM ACETYLATED HYALURONATE.
Apply at the last step of skin care, 15 minutes before sun exposure. Apply a finger-sized amount in 2 to 3 doses. Reapply frequently as needed.
Judged on how rich the formula reads from its ingredient list, it suits Balanced, Combination (oily), Oily skin best. It is the least natural fit for Dry, Combination (dry) skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
3 ingredients could feed malassezia: Polyglyceryl-3 Distearate, Glyceryl Stearate, Glyceryl Stearate Citrate. That describes the yeast's food supply, not a prediction that they will cause a breakout.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
No — it contains Parfum.
No. Reading the full ingredient list, this formula is no drying alcohol.
No — it contains Polysilicone-15.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.
Use it in the morning, final morning step, before makeup.
It lists 42 ingredients, of which 13 are recorded as actives.
Dr. Ceuracle, a brand based in Korea.
It filters UV with Uvinul T 150 (ethylhexyl triazone), Mexoryl SX (terephthalylidene dicamphor sulfonic acid), Parsol SLX (polysilicone-15), Uvinul A Plus (diethylamino hydroxybenzoyl hexyl benzoate), Tinosorb S (bis-ethylhexyloxyphenol methoxyphenyl triazine).
Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.
Unlikely. It filters with organic (chemical) filters only, which dissolve into the formula rather than sitting on the surface, so they do not leave a white cast.
It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.
Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.
Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect