innisfree
Green Tea Hyaluronic Glow Eye & Face Ball
face eyes serum
innisfree
face eyes serum
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testThe Innisfree Green Tea Hyaluronic Glow Eye & Face Ball is a refreshing, lightweight eye serum designed to hydrate, brighten, and revitalize tired skin. Infused with green tea extract, hyaluronic acid, and caffeine, it provides deep moisture while helping to reduce puffiness and dullness around the eyes. The formula features fine shimmer particles for a subtle glow, leaving your skin looking fresh and radiant. With an easy-to-use roll-on applicator, this serum gently massages the skin, enhancing absorption and soothing tired areas.
Green Tea Hyaluronic Glow Eye & Face Ball is a lightweight serum from innisfree, a brand based in Korea. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 38 ingredients, each broken down in full below.
By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Butylene Glycol, Glycerin and Propanediol, humectants that pull water into the upper layers of skin rather than sealing it there.
It is a mineral sunscreen, filtering with Titanium Dioxide. Between them those filters cover UVB and UVA II. They stop short of UVA I (340–400 nm), the deepest ageing wavelengths, so this is not a broad-spectrum filter system by the strictest reading. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.
Hydration: Very high. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Butylene Glycol, Glycerin, Propanediol and Ethylhexylglycerin.
Soothing: Moderate. Ingredients aimed at visible redness and reactivity, and here that comes from Niacinamide, Adenosine, Camellia Sinensis Leaf Extract and Sodium Hyaluronate.
Barrier support: Moderate. Lipids and repair signals that support skin barrier integrity, and here that comes from Niacinamide and Squalane.
Oil control: Moderate. Ingredients that moderate sebum or absorb shine, and here that comes from Niacinamide and Maltodextrin.
On richness alone it suits Balanced, Combination (oily) and Oily skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on cell renewal and firmness signalling. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is fragrance-free, essential-oil-free, no drying alcohol, paraben-free, microplastic-free and sulfate-free. Those claims come from the ingredient list itself, not from the packaging.
It can be used morning and evening. In a routine it goes before moisturiser. Tap along the orbital bone with your ring finger; product migrates upward on its own. It carries UV filters, so it belongs in your morning routine.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Calms redness, irritation, and inflammation for sensitive skin
Brightens and balances complexion for a more uniform appearance
Regulates sebum production to reduce shine and greasiness
Tightens and refines the look of enlarged pores
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
Mineral filter system · does not reach UVA I
Strong UVB and short-UVA protection, but it stops before UVA I — a mineral formula leaning on titanium dioxide alone needs zinc oxide beside it for deep UVA.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
3rd on the list, which puts it at an estimated 5–20% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
4th on the list, which puts it at an estimated 2–10% of the formula.
1,3-dihydroxypropane
5th on the list, which puts it at an estimated 2–10% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
6th on the list, which puts it at an estimated 2–10% of the formula.
Dimethicone
7th on the list, which puts it at an estimated 1–5% of the formula.
1,1,5,5,5-Hexamethyl-3-phenyl-3-[(trimethylsilyl)oxy]trisiloxane
8th on the list, which puts it at an estimated 1–5% of the formula.
1H-Purine-2,6-dione, 3,7-dihydro-1,3,7-trimethyl-
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,6,10,15,19,23-Hexamethyltetracosane
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3-(4-Carboxy-2-oxo-1-pyrrolidinyl)propyl methyl siloxane, polymer with dimethylsiloxane, trimethylsilyl-terminated
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Titanium dioxide (CI 77891)
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Poly[oxy(dimethylsilylane)], .alpha.-hydro-.omega.-hydroxy-
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
Every filter in this formula is photostable
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Dimethicone, Phenyl Trimethicone, Polysilicone-33, PCA Dimethicone, Dimethiconol
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.
This product is the "Eye" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 38 ingredients on the label.
Sets the thickness, spread and stability of the formula
Draws water into the upper layers of skin
Changes how skin behaves rather than how it feels
Softens and smooths by filling gaps between skin cells
Dissolves and carries everything else
Forms a film that slows water loss
Binds trace metals that would otherwise spoil the formula
Sets the acidity the formula needs to work
Neutralises free radicals from UV and pollution
Lifts oil and dirt, or holds oil and water together
Absorbs or scatters ultraviolet light
Loosens or dissolves dead surface cells
Botanical material, usually for antioxidants or scent
Keeps the product free of microbial growth
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
3rd on the list, which puts it at an estimated 5–20% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
4th on the list, which puts it at an estimated 2–10% of the formula.
1,3-dihydroxypropane
5th on the list, which puts it at an estimated 2–10% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
6th on the list, which puts it at an estimated 2–10% of the formula.
Dimethicone
7th on the list, which puts it at an estimated 1–5% of the formula.
1,1,5,5,5-Hexamethyl-3-phenyl-3-[(trimethylsilyl)oxy]trisiloxane
8th on the list, which puts it at an estimated 1–5% of the formula.
1H-Purine-2,6-dione, 3,7-dihydro-1,3,7-trimethyl-
9th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,6,10,15,19,23-Hexamethyltetracosane
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sorbitan, monododecanoate, poly(oxy-1,2-ethanediyl) derivs.
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polysilicone-33 is a polysilsesquioxane that also contains dimethyl siloxane groups. It is produced by the hydrolysis and condensation of dimethyldimethoxysilane, Methyltrimethoxysilane, propyltrimethoxysilane, Aminopropyl Triethoxysilane, octyltriethoxysilane, and phenyltrimethoxysilane
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Propenoic acid, polymer with 2,2-bis(hydroxymethyl)propane-1,3-diol 2-propenyl ether
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3-(4-Carboxy-2-oxo-1-pyrrolidinyl)propyl methyl siloxane, polymer with dimethylsiloxane, trimethylsilyl-terminated
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polyacrylate Crosspolymer-6 is a copolymer of ammonium acryloyldimethyltaurate, dimethylacrylamide, lauryl methacrylate and laureth-4 methacrylate, crosslinked with trimethylolpropane triacrylate
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,3-Propanediol, 2-amino-2-(hydroxymethyl)-
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Boron nitride
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,2-Dimethyl-2-(2'-propenamido)ethanesulfonic acid, sodium salt, homopolymer
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Titanium dioxide (CI 77891)
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Poly[oxy(dimethylsilylane)], .alpha.-hydro-.omega.-hydroxy-
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Fluorphlogopite, Mg3K[AlF2O(SiO3)3] (synthetic)
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octanoic acid, monoester with glycerol
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium metaphosphate
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
6-Amino-9-beta-D-ribofuranosyl-9H-purine
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Camellia Sinensis Leaf Extract is an extract of the leaves of the Tea, Camellia sinensis, Theaceae
27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
L-Arginine
28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Cycloheptapentylose
29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
.beta.-Cyclodextrin, 2-hydroxypropyl ethers
30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Maltodextrin
31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Hydroxy-1,2,3-propanetricarboxylic acid
32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium, salt
33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tin dioxide (CI 77861)
34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Hyaluronic Acid is the hydrolysate of Hyaluronic Acid derived by acid, enzyme or other method of hydrolysis
35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium salt, polymer with 1,1'-sulfonylbis[ethene]
36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid
37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium Acetylhyaluronate
Products in the same category that share this formula's distinguishing ingredients.
innisfree
Shares 17 key ingredients with Green Tea Hyaluronic Glow Eye & Face Ball: Butylene Glycol, Glycerin, Propanediol, Niacinamide, Dimethicone
Medicube
Shares 12 key ingredients with Green Tea Hyaluronic Glow Eye & Face Ball: Water, Glycerin, Propanediol, Niacinamide, Citric Acid
innisfree
Shares 12 key ingredients with Green Tea Hyaluronic Glow Eye & Face Ball: Water, Propanediol, Glycerin, Niacinamide, Butylene Glycol
Kundal
Shares 12 key ingredients with Green Tea Hyaluronic Glow Eye & Face Ball: Dimethicone, Dimethiconol, Water, Butylene Glycol, Squalane
Missha
Shares 12 key ingredients with Green Tea Hyaluronic Glow Eye & Face Ball: Water, Glycerin, Propanediol, Niacinamide, Butylene Glycol
Arencia
Shares 11 key ingredients with Green Tea Hyaluronic Glow Eye & Face Ball: Water, Butylene Glycol, Glycerin, Propanediol, Niacinamide
WATER, BUTYLENE GLYCOL, GLYCERIN, PROPANEDIOL, NIACINAMIDE, DIMETHICONE, PHENYL TRIMETHICONE, CAFFEINE, 1,2-HEXANEDIOL, SQUALANE, POLYSORBATE 20, POLYSILICONE-33, CARBOMER, PCA DIMETHICONE, POLYACRYLATE CROSSPOLYMER-6, TROMETHAMINE, BORON NITRIDE, SODIUM POLYACRYLOYLDIMETHYL TAURATE, TITANIUM DIOXIDE, DIMETHICONOL, SYNTHETIC FLUORPHLOGOPITE, GLYCERYL CAPRYLATE, SODIUM METAPHOSPHATE, ETHYLHEXYLGLYCERIN, ADENOSINE, CAMELLIA SINENSIS LEAF EXTRACT, ARGININE, CYCLODEXTRIN, HYDROXYPROPYL CYCLODEXTRIN, MALTODEXTRIN, CITRIC ACID, SODIUM HYALURONATE, TIN OXIDE, HYDROLYZED HYALURONIC ACID, SODIUM HYALURONATE CROSSPOLYMER, HYALURONIC ACID, TOCOPHEROL, SODIUM ACETYLATED HYALURONATE.
NIACINAMIDE, CITRIC ACID, SODIUM HYALURONATE, HYDROLYZED HYALURONIC ACID, SODIUM HYALURONATE CROSSPOLYMER, HYALURONIC ACID, SODIUM ACETYLATED HYALURONATE.
Pump once and gently massage around the eye area. Then softly pat to enhance the absorption. Can be used for both morning and evening.
Judged on how rich the formula reads from its ingredient list, it suits Balanced, Combination (oily), Oily skin best. It is the least natural fit for Dry, Combination (dry) skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
2 ingredients could feed malassezia: Polysorbate 20, Glyceryl Caprylate. That describes the yeast's food supply, not a prediction that they will cause a breakout.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
Yes. Reading the full ingredient list, this formula is fragrance-free.
No. Reading the full ingredient list, this formula is no drying alcohol.
No — it contains Dimethicone, Phenyl Trimethicone, Polysilicone-33, PCA Dimethicone, Dimethiconol.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.
Use it morning and evening, before moisturiser.
It lists 38 ingredients, of which 8 are recorded as actives.
innisfree, a brand based in Korea.
It filters UV with Titanium Dioxide (titanium dioxide).
Not in the strictest sense. Its filters stop short of UVA I (340–400 nm), the deepest ageing wavelengths.
Possibly. It filters with mineral UV filters, which sit on the surface and can leave a visible cast on deeper skin tones, especially at high SPF.
It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.
Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.
Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect