MIXSOON Centella Sun Cream SPF50+ PA++++

MIXSOON

Centella Sun Cream SPF50+ PA++++

face sunscreen

Added Last edited

Fit by skin type

General, ingredient-based — not your personalized match.

Dry
63%
Combination (dry)
63%
Balanced
93%
Combination (oily)
77%
Oily
77%

See how this fits your skin

Take the skin test and I'll show you how suitable this product is for you.

Take the skin test
31
Ingredients
3
Benefits
0
Actives
Find Dupes

The MIXSOON Centella Sun Cream SPF 50+ PA++++ is a lightweight and quick-absorbing formula that offers broad-spectrum protection against UVA and UVB rays. Infused with centella asiatica, and adenosine, this cream nourishes, brightens, and hydrates your skin. Perfect for all skin types, including sensitive and acne-prone skin, it leaves no white cast or sticky residue. With its high SPF rating, it helps prevent sun damage, premature aging, and dark spots. Try The MIXSOON Centella Sun Cream today for radiant and protected skin.

Key Insights

Benefits

3
Anti-Aging
Hydration
Soothing

Risks

5
Alcohol
Allergen
Microplastic
Silicone
Synthetic polymer

About Centella Sun Cream SPF50+ PA++++

Overview

Centella Sun Cream SPF50+ PA++++ is a lightweight sunscreen from MIXSOON. It is rated SPF 50+ PA++++, meaning it is tested to the top of both the UVB and the UVA scales used in Asia. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 31 ingredients, each broken down in full below.

Texture and finish

By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Methylpropanediol, Glycerin and Ethylhexylglycerin, humectants that pull water into the upper layers of skin rather than sealing it there.

UV filter system

It is a chemical (organic-filter) sunscreen, using Mexoryl SX, Uvinul T 150, Parsol SLX, Uvinul A Plus and Tinosorb S. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.

What the formula does

Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Methylpropanediol, Glycerin, Ethylhexylglycerin and Water.

Who it suits

On richness alone it suits Balanced skin best, and is the least natural fit for Dry and Combination (dry) skin. Several ingredients carry irritation flags. If your skin is reactive, this is one to patch test carefully or approach slowly.

What it does not target

The formula contributes little or nothing on barrier support, antioxidant protection, oil control and brightening and tone. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.

What is not in it

Reading the full list, the formula is paraben-free, sulfate-free, dye-free, oil-free and no animal-derived ingredients. Those claims come from the ingredient list itself, not from the packaging. It does contain fragrance, essential oils and drying alcohol, worth knowing if your skin reacts to any of them.

Where it fits in a routine

Use it in the morning. In a routine it goes final morning step, before makeup. Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms. Reapply every two hours of sun exposure, and after swimming or towelling off. Let it set for a couple of minutes before makeup so it does not pill.

This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.

Pros and cons

Drawn purely from the ingredient list

Pros

  • Broad-spectrum coverage that reaches into UVA I
  • Every UV filter in it is photostable
  • Strong humectant content for hydration

Things to know

  • Contains fragrance or declared fragrance allergens
  • Contains essential oils, a common source of reactivity
  • Contains drying alcohol high in the list
  • Contains a solid synthetic polymer (microplastic)
  • 3 ingredients could feed malassezia (fungal acne)
  • Several ingredients carry irritation flags

Which skin types it suits

Scored on how rich or light the formula reads from its INCI order.

Suitable for

  • Balanced skin

May suit

  • Combination (oily) skin
  • Oily skin

Less suitable for

  • Dry skin
  • Combination (dry) skin

Sensitive skin

Several ingredients here carry irritation flags. If your skin is reactive or you have rosacea, introduce this slowly, or ask a dermatologist first.

Skin concerns

Based on the curated benefits documented for this product's ingredients.

Helps with

  • Hydration 12 ingredients

    Attracts and locks in moisture to keep skin plump and dewy

  • Anti-Aging 7 ingredients

    Boosts collagen and cell turnover to reduce fine lines and wrinkles

  • Soothing 1 ingredient

    Calms redness, irritation, and inflammation for sensitive skin

Does not target

Anti-Acne Blackhead Reducing Dark Spot Fading Evens Skin Tone Oil Control Pore Minimizer Smooths Bumpy Skin

None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.

UV filters

Chemical (organic) filter system · broad-spectrum through UVA I

Mexoryl SX

terephthalylidene dicamphor sulfonic acid
Protects from
UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation UVA filter
Approved in
EU, UK, Korea, Japan — US approval limited to specific products
Maximum permitted level
Up to 10% (EU)

Water-soluble UVA filter, which is unusual — most UVA filters are oil-soluble.

Uvinul T 150

ethylhexyl triazone
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
Next-generation UVB filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 5% (EU)

The most efficient UVB absorber available by weight, which is why high-SPF formulas reach SPF 50+ without feeling heavy. Contributes nothing to UVA.

Parsol SLX

polysilicone-15
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
Polymeric UVB filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

A polymer, so it stays on the surface of skin rather than penetrating — low irritation potential and no measurable systemic absorption.

Uvinul A Plus

diethylamino hydroxybenzoyl hexyl benzoate
Protects from
UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation UVA filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

A photostable replacement for avobenzone: it peaks at 354 nm, deep in UVA I, and does not need a stabiliser to survive the day.

Tinosorb S

bis-ethylhexyloxyphenol methoxyphenyl triazine
Protects from
UVB (290–320 nm), UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation broad-spectrum filter
Approved in
EU, UK, Korea, Japan, Australia — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

One of the most photostable filters in use, and it stabilises avobenzone and octinoxate alongside it. Oil-soluble, cosmetically light, no white cast.

Key ingredients

The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.

1st on the list, which puts it at an estimated 30–80% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration

2nd on the list, which puts it at an estimated 5–20% of the formula.

Dibutyl adipate

Hydration

3rd on the list, which puts it at an estimated 5–20% of the formula.

2-Methyl-1,3-propanediol

Hydration

5th on the list, which puts it at an estimated 2–10% of the formula.

3,3'-(1,4-Phenylenedimethylene)bis[7,7-dimethyl-2-oxo-bicyclo[2.2.1]heptane-1-methanesulfonic acid]

Anti-Aging

7th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone

Anti-Aging

8th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane

Hydration Anti-Aging

9th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Polysilicone-15 is the siloxane polymer that conforms generally to the formula:

Anti-Aging

11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2,3-Propanetriol, homopolymer, isodecanoates (1:2) (3 mol glycerol average molar ratio)

Hydration

12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,1,1,3,5,5,5-Heptamethyl-3-octyl-trisiloxane

Hydration

13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Alcohols, C16-18

Hydration

14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester

Anti-Aging

18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Stearic acid

Hydration

Formula analysis

Each axis is scored from the ingredients present and how high up the list they sit.

Hydration High

Ingredients that pull and hold water in the upper layers of skin

Barrier support None

Lipids and repair signals that support skin barrier integrity

Antioxidant support None

Ingredients that mop up free radicals from UV and pollution

Oil control None

Ingredients that moderate sebum or absorb shine

Brightening None

Ingredients that act on uneven tone and post-inflammatory marks

Soothing Low

Ingredients aimed at visible redness and reactivity

Cell renewal None

Retinoids, acids and enzymes that speed surface turnover

Firmness signalling None

Peptides and growth factors that signal for collagen support

Photostability Very high

Every filter in this formula is photostable

Active and supporting ingredients

"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.

Supporting ingredients (26)

Solvents, emollients, texture agents and preservatives — the formula that carries the actives.

Water Dibutyl Adipate Methylpropanediol Alcohol Denat. 1,2-hexanediol Glycerin Tromethamine Polyglyceryl-3 Diisostearate Caprylyl Methicone Cetearyl Alcohol Dipropylene Glycol Polymethylsilsesquioxane Palmitic Acid Stearic Acid Glyceryl Stearate Potassium Cetyl Phosphate Polyether-1 Carbomer Ammonium Acryloyldimethyltaurate/vp Copolymer Glyceryl Stearate Citrate Acrylates/c10-30 Alkyl Acrylate Crosspolymer Lavandula Angustifolia Oil Centella Asiatica Extract Linalool Ethylhexylglycerin Geraniol

What is and is not in it

Read from the full ingredient list. A brand's own claim may differ.

Free from

  • Paraben-free
  • Sulfate-free
  • Dye-free
  • Oil-free
  • No animal-derived ingredients

Contains

  • Fragrance

    Linalool, Geraniol

  • Essential oils

    Lavandula Angustifolia Oil, Linalool, Geraniol

  • Drying alcohol

    Alcohol Denat.

  • Silicones

    Polysilicone-15, Caprylyl Methicone, Polymethylsilsesquioxane

  • Microplastics

    Polymethylsilsesquioxane

What to layer it with

Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.

Compatible with

  • Vitamin C (L-ascorbic acid)
  • Retinoids (retinol, retinal)
  • AHAs (glycolic, lactic)
  • BHA (salicylic acid)
  • PHAs (gluconolactone)
  • Benzoyl peroxide
  • Azelaic acid
  • Copper peptides
  • Bakuchiol
  • Niacinamide
  • Hyaluronic acid
  • Ceramides
  • Signal peptides
  • Panthenol
  • Sunscreen

Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.

Where it fits in a routine

Morning
  1. Cleanse
  2. Toning
  3. Treat
  4. Moisturise
  5. Protect

This product is the "Protect" step.

  • Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms.
  • Reapply every two hours of sun exposure, and after swimming or towelling off.
  • Let it set for a couple of minutes before makeup so it does not pill.

Safety and suitability

Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.

Pregnancy and breastfeeding
Nothing in this formula is on the standard pregnancy-caution list. That is not clearance — ask your doctor about anything you use daily.
Fungal acne (malassezia)
3 ingredients could feed malassezia: Polyglyceryl-3 Diisostearate, Glyceryl Stearate, Glyceryl Stearate Citrate. That is about the yeast's food supply, not a prediction that you will break out.
Sensitive and reactive skin
Several ingredients here carry irritation flags. If your skin is reactive or you have rosacea, introduce this slowly, or ask a dermatologist first.
Recorded ingredient risks
Alcohol, Allergen, Microplastic, Silicone, Synthetic polymer

Ingredients by function

Most ingredients do more than one job, so these counts add up to more than the 31 ingredients on the label.

10
Texture agent

Sets the thickness, spread and stability of the formula

8
Surfactant

Lifts oil and dirt, or holds oil and water together

7
Solvent

Dissolves and carries everything else

6
Emollient

Softens and smooths by filling gaps between skin cells

5
UV filter

Absorbs or scatters ultraviolet light

3
Occlusive

Forms a film that slows water loss

2
Fragrance / colour

Changes how the product smells or looks

1
Soothing

Calms visible redness and irritation

1
Humectant

Draws water into the upper layers of skin

1
pH adjuster

Sets the acidity the formula needs to work

1
Plant extract

Botanical material, usually for antioxidants or scent

1
Preservative

Keeps the product free of microbial growth

Ingredient breakdown

Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.

1 Water Solvent
Estimated level
30–80%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

1st on the list, which puts it at an estimated 30–80% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration
3 scientific references
  • Skin Research and Technology, May 2015, pages 131-136
  • Skin Pharmacology and Applied Skin Physiology, November-December 1999, pages 344-351
  • Journal of Cosmetic Science, September-October 1993, pages 249-262
2 Dibutyl Adipate Emollient
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Occlusive, Solvent

2nd on the list, which puts it at an estimated 5–20% of the formula.

Dibutyl adipate

Hydration
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

3rd on the list, which puts it at an estimated 5–20% of the formula.

2-Methyl-1,3-propanediol

Hydration
3 scientific references
  • PubChem, Accessed April 2021, ePublication
  • Cosmetic Ingredient Review, June 2018, pages 1-73
  • Contact Dermatitis, September 2017, pages 159-162
4 Alcohol Denat. Texture agent
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent, Solvent, Preservative

4th on the list, which puts it at an estimated 2–10% of the formula.

Alcohol Denat. is ethyl alcohol that is denatured with one or more denaturing agents in accordance with the national legislation of each European Community (EU) country.

Alcohol
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

5th on the list, which puts it at an estimated 2–10% of the formula.

3,3'-(1,4-Phenylenedimethylene)bis[7,7-dimethyl-2-oxo-bicyclo[2.2.1]heptane-1-methanesulfonic acid]

Anti-Aging
8 scientific references
  • 5 Super Anti-Aging Antioxidants Your Skin Needs
  • How to Keep Your Neck & Chest Looking Young
  • Acne & Aging Skin
  • How to Diminish Uneven Skin Tone and Get Your Glow Back
  • What Are Peptides and What Do They Do for Skin?
  • The Truth About Firming Creams
  • Top 5 Reasons to Add Antioxidants to Your Skin Care Routine
  • Anti-Aging Superstars
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Solvent

6th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
UV filter

7th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone

Anti-Aging
8 Glycerin Humectant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Occlusive, Texture agent, Solvent

8th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane

Hydration Anti-Aging
6 scientific references
  • Journal of Pharmaceutical Investigation, March 2021, pages 223-231
  • International Journal of Toxicology, November/December 2019, Volume 38, Supplement 3, pages 6S-22S
  • International Journal of Cosmetic Science, August 2016, ePublication
  • British Journal of Dermatology, July 2008, pages 23-34
  • Journal of Cosmetic Dermatology, June 2007, pages 75-82
  • Proceedings of the National Academy of Sciences, June 2003, pages 7, 360-7, 365
9 Polysilicone-15 UV filter
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
UV filter

9th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Polysilicone-15 is the siloxane polymer that conforms generally to the formula:

Anti-Aging
10 Tromethamine pH adjuster
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
pH adjuster

10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,3-Propanediol, 2-amino-2-(hydroxymethyl)-

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Surfactant

11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2,3-Propanetriol, homopolymer, isodecanoates (1:2) (3 mol glycerol average molar ratio)

Hydration
3 scientific references
  • Colloids and Surfaces, June 2017, pages 279–286
  • International Journal of Toxicology, August 2023, pages 5S–101S
  • Scientific Reports, March 2023, pages 1–14
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,1,1,3,5,5,5-Heptamethyl-3-octyl-trisiloxane

Hydration Silicone
13 Cetearyl Alcohol Emollient
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Surfactant, Texture agent

13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Alcohols, C16-18

Hydration
4 scientific references
  • CosmeticsInfoorg, Accessed March 2021, ePublication
  • FDA Cosmetic Labeling Claims, August 2020, ePublication
  • Journal of the Society of Cosmetic Scientists of Korea, June 2009, pages 103-110
  • Journal of the American College of Toxicology, 1988, pages 359-413
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
UV filter

14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester

Anti-Aging
15 Dipropylene Glycol Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent, Solvent

15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,1'-Oxydipropan-2-ol; Oxydipropan-2-ol; Hydroxypropyloxypropanol

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Polymer formed by hydrolysis and condensation of methyltrimethoxysilane

Microplastic
17 Palmitic Acid Emollient
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Surfactant

17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Hexadecanoic acid

18 Stearic Acid Emollient
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Surfactant, Texture agent

18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Stearic acid

Hydration
4 scientific references
  • Cosmetic Ingredient Review, May 2019, pages 1-61
  • International Journal of Cosmetic Science, August 2008, page 310
  • Therapeutics for the Clinician, May 2005, pages 317-324
  • Journal of Cosmetic Science, December 2003, pages 559-568
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
UV filter

19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]

Anti-Aging
20 Glyceryl Stearate Emollient
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Surfactant

20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Stearic acid, monoester with glycerol

Hydration
3 scientific references
  • Cosmeticsinfoorg, Accessed November 2021, ePublication
  • Drugs in Context, April 2018, pages 1-14
  • International Journal of Toxicology, May 2007, pages 1–30
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Surfactant

21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1-hexadecanol, phosphate, potassium salt

22 Polyether-1 Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Copolymer of PEG-180, dodoxynol-5, PEG-25 tristyrylphenol and tetramethoxymethylglycouril monomers

23 Carbomer Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2-Propenoic acid, polymer with 2,2-bis(hydroxymethyl)propane-1,3-diol 2-propenyl ether

Synthetic polymer
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Ammonium Acryloyldimethyltaurate/VP Copolymer is a copolymer of ammonium acryloyldimethyltaurate and vinylpyrrolidone monomers

Hydration
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Surfactant

25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2,3-Propanetricarboxylic acid, 2-hydroxy-, ester with 1,2,3-propanetriol monooctadecanoate

Hydration
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Occlusive, Texture agent

26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

C10-30 alkyl propenoate, polymer with propenoic acid, butenoic acidand/or alkyl propenoates, product with propenyl sucrose ether or propenyl 2,2-dihydroxymethyl-1,3-propanediol

Synthetic polymer
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Lavandula Angustifolia Oil is the volatile oil obtained from the flowers of the Lavender, Lavandula angustifolia, Labiatae. ISO 8902:2009

Allergen
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Soothing, Surfactant, Plant extract

28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Centella Asiatica Extract is the extract of the whole plant Hydrocotyl, Centella asiatica L., Apiaceae

Soothing Anti-Aging
6 scientific references
  • Phytomedicine, April 2018, pages 110–119
  • Clinical, Cosmetic, and Investigational Dermatology, August 2017, pages 311–315
  • Indian Journal of Pharmaceutical Sciences, Jan-Feb 2016, pages 27–33
  • Postepy Dermatologii I, February 2013, pages 46–49
  • Indian Journal of Pharmaceutical Sciences, 2010, pages 546–556
  • Scientific Reports, June 2021, ePublication
29 Linalool Fragrance / colour
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Fragrance / colour

29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

3,7-Dimethyl octa-1,6-diene-3-ol

Allergen
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Propanediol, 3-(2-ethylhexyloxy)

Hydration
5 scientific references
  • PLoS One, October 2016, ePublication
  • Contact Dermatitis, May 2016, pages 281-288
  • International Journal of Toxicology, September 2013, pages 5S-21S
  • Personal Care, 2008, pages 1-4
  • Cosmetic Science Technology, 2006, pages 1-11
31 Geraniol Fragrance / colour
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Fragrance / colour

31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2,6-Octadien-1-ol, 3,7-dimethyl-, (2E)-

Allergen

People also compare

Products in the same category that share this formula's distinguishing ingredients.

Cica Regen Vegan Sun SPF50 PA++++

Dr. Ceuracle

Shares 12 key ingredients with Centella Sun Cream SPF50+ PA++++: Water, Dibutyl Adipate, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid, Glycerin

Cica Regen Vegan Sun SPF50+

Dr. Ceuracle

Shares 12 key ingredients with Centella Sun Cream SPF50+ PA++++: Water, Dibutyl Adipate, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid, Glycerin

Heartleaf Silky Moisture Sun Cream

Anua

Shares 11 key ingredients with Centella Sun Cream SPF50+ PA++++: Water, Dibutyl Adipate, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid, Glycerin

Sunprise Mild Watery Light SPF50 PA+++

ETUDE

Shares 11 key ingredients with Centella Sun Cream SPF50+ PA++++: Water, Dibutyl Adipate, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid, Glycerin

White In Milk Sun PLUS SPF50+ PA++++

G9SKIN

Shares 11 key ingredients with Centella Sun Cream SPF50+ PA++++: Water, Dibutyl Adipate, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid, Glycerin

Frequently asked questions

What ingredients are in Centella Sun Cream SPF50+ PA++++?

WATER, DIBUTYL ADIPATE, METHYLPROPANEDIOL, ALCOHOL DENAT., TEREPHTHALYLIDENE DICAMPHOR SULFONIC ACID, 1,2-HEXANEDIOL, ETHYLHEXYL TRIAZONE, GLYCERIN, POLYSILICONE-15, TROMETHAMINE, POLYGLYCERYL-3 DIISOSTEARATE, CAPRYLYL METHICONE, CETEARYL ALCOHOL, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE, DIPROPYLENE GLYCOL, POLYMETHYLSILSESQUIOXANE, PALMITIC ACID, STEARIC ACID, BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE, GLYCERYL STEARATE, POTASSIUM CETYL PHOSPHATE, POLYETHER-1, CARBOMER, AMMONIUM ACRYLOYLDIMETHYLTAURATE/VP COPOLYMER, GLYCERYL STEARATE CITRATE, ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER, LAVANDULA ANGUSTIFOLIA OIL, CENTELLA ASIATICA EXTRACT, LINALOOL, ETHYLHEXYLGLYCERIN, GERANIOL.

How do I use Centella Sun Cream SPF50+ PA++++?

At the last step of skincare routine, take a moderate amount and spread evenly on exposed areas.

What skin types is Centella Sun Cream SPF50+ PA++++ good for?

Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry) skin.

Is Centella Sun Cream SPF50+ PA++++ good for sensitive skin?

Some ingredients here carry irritation flags, so sensitive skin should patch test on the jawline for a few days before applying it to the whole face.

Is Centella Sun Cream SPF50+ PA++++ fungal acne safe?

3 ingredients could feed malassezia: Polyglyceryl-3 Diisostearate, Glyceryl Stearate, Glyceryl Stearate Citrate. That describes the yeast's food supply, not a prediction that they will cause a breakout.

Can I use Centella Sun Cream SPF50+ PA++++ while pregnant?

Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.

Is Centella Sun Cream SPF50+ PA++++ fragrance free?

No — it contains Linalool, Geraniol.

Does Centella Sun Cream SPF50+ PA++++ contain alcohol?

Yes — it contains Alcohol Denat..

Is Centella Sun Cream SPF50+ PA++++ silicone free?

No — it contains Polysilicone-15, Caprylyl Methicone, Polymethylsilsesquioxane.

Does Centella Sun Cream SPF50+ PA++++ contain essential oils?

Yes — it contains Lavandula Angustifolia Oil, Linalool, Geraniol.

Is Centella Sun Cream SPF50+ PA++++ paraben free?

Yes. Reading the full ingredient list, this formula is paraben-free.

What can I layer with Centella Sun Cream SPF50+ PA++++?

It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.

When should I apply Centella Sun Cream SPF50+ PA++++?

Use it in the morning, final morning step, before makeup.

How many ingredients does Centella Sun Cream SPF50+ PA++++ have?

It lists 31 ingredients, of which 5 are recorded as actives.

Who makes Centella Sun Cream SPF50+ PA++++?

MIXSOON.

What UV filters are in Centella Sun Cream SPF50+ PA++++?

It filters UV with Mexoryl SX (terephthalylidene dicamphor sulfonic acid), Uvinul T 150 (ethylhexyl triazone), Parsol SLX (polysilicone-15), Uvinul A Plus (diethylamino hydroxybenzoyl hexyl benzoate), Tinosorb S (bis-ethylhexyloxyphenol methoxyphenyl triazine).

Is Centella Sun Cream SPF50+ PA++++ broad spectrum?

Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.

Does Centella Sun Cream SPF50+ PA++++ leave a white cast?

Unlikely. It filters with organic (chemical) filters only, which dissolve into the formula rather than sitting on the surface, so they do not leave a white cast.

Is Centella Sun Cream SPF50+ PA++++ reef safe?

It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.

Can I wear Centella Sun Cream SPF50+ PA++++ under makeup?

Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.

How often should I reapply Centella Sun Cream SPF50+ PA++++?

Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.

Brand
MIXSOON

Reviews

0 total

Log in to leave a review.

No reviews yet. Be the first to share your thoughts.