Haruharu Wonder Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++

Haruharu Wonder

Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++

face sunscreen

Added Last edited

Fit by skin type

General, ingredient-based — not your personalized match.

Dry
65%
Combination (dry)
65%
Balanced
95%
Combination (oily)
75%
Oily
75%

See how this fits your skin

Take the skin test and I'll show you how suitable this product is for you.

Take the skin test
38
Ingredients
5
Benefits
2
Actives
Find Dupes

A feather-light, cooling sun stick with a semi-matte finish that provides SPF 50 broad-spectrum protection. It features Air Fence technology to mattify and refresh the skin while using antioxidant-rich bamboo shoot extract to hydrate, brighten, and protect against sun damage and aging.

Key Insights

Benefits

5
Anti-Aging
Evens Skin Tone
Hydration
Pore Minimizer
Soothing

Active Ingredients

2
Vitamin B3 (niacinamide) Vitamin B5 (panthenol)

Risks

2
Microplastic
Silicone

About Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++

Overview

Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ is a lightweight sunscreen from Haruharu Wonder, a brand based in Korea. It is rated SPF 50+ PA++++, meaning it is tested to the top of both the UVB and the UVA scales used in Asia. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 38 ingredients, each broken down in full below.

Texture and finish

By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. It contains both silicones and oils, a combination that usually finishes smooth and slightly satin and sits well under makeup. Hydration is handled by Butylene Glycol, Betaine and Panthenol, humectants that pull water into the upper layers of skin rather than sealing it there.

UV filter system

It is a chemical (organic-filter) sunscreen, using Uvinul A Plus, Tinosorb S, Uvinul T 150 and Parsol SLX. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.

What the formula does

Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Butylene Glycol, Betaine, Panthenol and Water.

Soothing: Moderate. Ingredients aimed at visible redness and reactivity, and here that comes from Diethylamino Hydroxybenzoyl Hexyl Benzoate, Ectoin, Panthenol and Niacinamide.

Who it suits

On richness alone it suits Balanced skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.

What it does not target

The formula contributes little or nothing on oil control, cell renewal and firmness signalling. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.

What is not in it

Reading the full list, the formula is fragrance-free, essential-oil-free, no drying alcohol, paraben-free, sulfate-free and dye-free. Those claims come from the ingredient list itself, not from the packaging.

Where it fits in a routine

Use it in the morning. In a routine it goes final morning step, before makeup. Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms. Reapply every two hours of sun exposure, and after swimming or towelling off. Let it set for a couple of minutes before makeup so it does not pill.

This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.

Pros and cons

Drawn purely from the ingredient list

Pros

  • Broad-spectrum coverage that reaches into UVA I
  • Every UV filter in it is photostable
  • No fragrance or declared allergens
  • No essential oils
  • No drying alcohol
  • Strong humectant content for hydration
  • No common irritants flagged in the list

Things to know

  • Contains a solid synthetic polymer (microplastic)
  • 5 ingredients could feed malassezia (fungal acne)

Which skin types it suits

Scored on how rich or light the formula reads from its INCI order.

Suitable for

  • Balanced skin

May suit

  • Combination (oily) skin
  • Oily skin

Less suitable for

  • Dry skin
  • Combination (dry) skin

Sensitive skin

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Skin concerns

Based on the curated benefits documented for this product's ingredients.

Helps with

  • Hydration 12 ingredients

    Attracts and locks in moisture to keep skin plump and dewy

  • Anti-Aging 8 ingredients

    Boosts collagen and cell turnover to reduce fine lines and wrinkles

  • Soothing 4 ingredients

    Calms redness, irritation, and inflammation for sensitive skin

  • Evens Skin Tone 3 ingredients

    Brightens and balances complexion for a more uniform appearance

  • Pore Minimizer 1 ingredient

    Tightens and refines the look of enlarged pores

Does not target

Anti-Acne Blackhead Reducing Dark Spot Fading Oil Control Smooths Bumpy Skin

None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.

UV filters

Chemical (organic) filter system · broad-spectrum through UVA I

Uvinul A Plus

diethylamino hydroxybenzoyl hexyl benzoate
Protects from
UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation UVA filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

A photostable replacement for avobenzone: it peaks at 354 nm, deep in UVA I, and does not need a stabiliser to survive the day.

Tinosorb S

bis-ethylhexyloxyphenol methoxyphenyl triazine
Protects from
UVB (290–320 nm), UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation broad-spectrum filter
Approved in
EU, UK, Korea, Japan, Australia — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

One of the most photostable filters in use, and it stabilises avobenzone and octinoxate alongside it. Oil-soluble, cosmetically light, no white cast.

Uvinul T 150

ethylhexyl triazone
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
Next-generation UVB filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 5% (EU)

The most efficient UVB absorber available by weight, which is why high-SPF formulas reach SPF 50+ without feeling heavy. Contributes nothing to UVA.

Parsol SLX

polysilicone-15
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
Polymeric UVB filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

A polymer, so it stays on the surface of skin rather than penetrating — low irritation potential and no measurable systemic absorption.

Key ingredients

The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.

1st on the list, which puts it at an estimated 30–80% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration

2nd on the list, which puts it at an estimated 5–20% of the formula.

Dibutyl adipate

Hydration

5th on the list, which puts it at an estimated 2–10% of the formula.

Benzoic acid, 2-hydroxy-, 2-butyloctyl ester

Hydration

7th on the list, which puts it at an estimated 1–5% of the formula.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration

12th on the list, which puts it at an estimated 1–3% of the formula.

1,1,1,3,5,5,5-Heptamethyl-3-octyl-trisiloxane

Hydration

13th on the list, which puts it at an estimated 1–3% of the formula.

Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone

Anti-Aging

14th on the list, which puts it at an estimated 1–3% of the formula.

Polysilicone-15 is the siloxane polymer that conforms generally to the formula:

Anti-Aging
Niacinamide Vitamin B3 (niacinamide)

18th on the list, which puts it at an estimated 1–3% of the formula.

Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**

Soothing Anti-Aging Pore Minimizer

27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Octanoic acid, monoester with glycerol

Hydration

Formula analysis

Each axis is scored from the ingredients present and how high up the list they sit.

Hydration High

Ingredients that pull and hold water in the upper layers of skin

Barrier support Low

Lipids and repair signals that support skin barrier integrity

Antioxidant support Low

Ingredients that mop up free radicals from UV and pollution

Oil control None

Ingredients that moderate sebum or absorb shine

Brightening Low

Ingredients that act on uneven tone and post-inflammatory marks

Soothing Moderate

Ingredients aimed at visible redness and reactivity

Cell renewal None

Retinoids, acids and enzymes that speed surface turnover

Firmness signalling None

Peptides and growth factors that signal for collagen support

Photostability Very high

Every filter in this formula is photostable

Active and supporting ingredients

"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.

Supporting ingredients (32)

Solvents, emollients, texture agents and preservatives — the formula that carries the actives.

Water Dibutyl Adipate Synthetic Wax Methyl Methacrylate Crosspolymer Butyloctyl Salicylate Caprylyl Trimethicone Butylene Glycol Propylheptyl Caprylate Isododecane Caprylyl Methicone Ceresin Camellia Japonica Seed Oil Diphenylsiloxy Phenyl Trimethicone Polyglyceryl-3 Polyricinoleate Lauryl Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone Dimethicone/vinyl Dimethicone Crosspolymer Sodium Chloride 1,2-hexanediol Polyglyceryl-4 Diisostearate/polyhydroxystearate/sebacate Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer Caprylyl Glycol Glyceryl Caprylate Phyllostachys Nigra Leaf Extract Phyllostachys Pubescens Shoot Bark Extract Adenosine Aspergillus Ferment Tocopherol Dipropylene Glycol Pentylene Glycol Bambusa Vulgaris Water Betaine Ectoin

What is and is not in it

Read from the full ingredient list. A brand's own claim may differ.

Free from

  • Fragrance-free
  • Essential-oil-free
  • No drying alcohol
  • Paraben-free
  • Sulfate-free
  • Dye-free
  • No animal-derived ingredients

Contains

  • Silicones

    Caprylyl Trimethicone, Caprylyl Methicone, Polysilicone-15, Diphenylsiloxy Phenyl Trimethicone, Lauryl Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone

  • Microplastics

    Methyl Methacrylate Crosspolymer, Vinyl Dimethicone/methicone Silsesquioxane Crosspolymer

  • Facial oils

    Camellia Japonica Seed Oil

What to layer it with

Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.

Compatible with

  • Vitamin C (L-ascorbic acid)
  • Retinoids (retinol, retinal)
  • AHAs (glycolic, lactic)
  • BHA (salicylic acid)
  • PHAs (gluconolactone)
  • Benzoyl peroxide
  • Azelaic acid
  • Copper peptides
  • Bakuchiol
  • Niacinamide
  • Hyaluronic acid
  • Ceramides
  • Signal peptides
  • Panthenol
  • Sunscreen

Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.

Where it fits in a routine

Morning
  1. Cleanse
  2. Toning
  3. Treat
  4. Moisturise
  5. Protect

This product is the "Protect" step.

  • Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms.
  • Reapply every two hours of sun exposure, and after swimming or towelling off.
  • Let it set for a couple of minutes before makeup so it does not pill.

Safety and suitability

Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.

Pregnancy and breastfeeding
Nothing in this formula is on the standard pregnancy-caution list. That is not clearance — ask your doctor about anything you use daily.
Fungal acne (malassezia)
5 ingredients could feed malassezia: Propylheptyl Caprylate, Camellia Japonica Seed Oil, Polyglyceryl-3 Polyricinoleate, Polyglyceryl-4 Diisostearate/polyhydroxystearate/sebacate, Glyceryl Caprylate. That is about the yeast's food supply, not a prediction that you will break out.
Sensitive and reactive skin
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Recorded ingredient risks
Microplastic, Silicone

Ingredients by function

Most ingredients do more than one job, so these counts add up to more than the 38 ingredients on the label.

10
Texture agent

Sets the thickness, spread and stability of the formula

8
Solvent

Dissolves and carries everything else

6
Emollient

Softens and smooths by filling gaps between skin cells

4
Surfactant

Lifts oil and dirt, or holds oil and water together

4
UV filter

Absorbs or scatters ultraviolet light

2
Active

Changes how skin behaves rather than how it feels

2
Humectant

Draws water into the upper layers of skin

2
Occlusive

Forms a film that slows water loss

2
Plant extract

Botanical material, usually for antioxidants or scent

1
Antioxidant

Neutralises free radicals from UV and pollution

1
Exfoliant

Loosens or dissolves dead surface cells

Ingredient breakdown

Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.

1 Water Solvent
Estimated level
30–80%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

1st on the list, which puts it at an estimated 30–80% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration
3 scientific references
  • Skin Research and Technology, May 2015, pages 131-136
  • Skin Pharmacology and Applied Skin Physiology, November-December 1999, pages 344-351
  • Journal of Cosmetic Science, September-October 1993, pages 249-262
2 Dibutyl Adipate Emollient
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Occlusive, Solvent

2nd on the list, which puts it at an estimated 5–20% of the formula.

Dibutyl adipate

Hydration
3 Synthetic Wax Exfoliant
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Exfoliant, Texture agent

3rd on the list, which puts it at an estimated 5–20% of the formula.

Synthetic Wax is a hydrocarbon wax derived generally through Fischer-Tropsch or ethylene polymerization processes.

Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Occlusive

4th on the list, which puts it at an estimated 2–10% of the formula.

2-Propenoic acid, 2-methyl-, 1,2-ethanediyl ester, polymer with methyl 2-methyl-2-propenoate

Microplastic
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

5th on the list, which puts it at an estimated 2–10% of the formula.

Benzoic acid, 2-hydroxy-, 2-butyloctyl ester

Hydration
4 scientific references
  • Cosmetic Ingredient Review, June 2019, pages 1-60
  • https://onlinepersonalcarecouncilorg/ctfa-static/online/lists/cir-pdfs/FR766pdf
  • International Journal of Toxicology, 2003, pages 1-108
  • https://wwwdeepdyvecom/lp/sage/safety-assessment-of-salicylic-acid-butyloctyl-salicylate-calcium-klHNmxZGsR?articleList=%2Fsearch%3Fquery%3Dbutyloctyl%2Bsalicylate
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line

6th on the list, which puts it at an estimated 2–10% of the formula.

Pentasiloxane, 1,1,1,9,9,9-hexamethyl-3,5,7-trioctyl-3,5,7-tris[(trimethylsilyl)oxy)]-

Silicone
7 Butylene Glycol Humectant
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Texture agent, Solvent

7th on the list, which puts it at an estimated 1–5% of the formula.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration
5 scientific references
  • CosmeticsInfoorg, Accessed March 2021, ePublication
  • US Food and Drug Administration Code of Federal Regulations</em>, Accessed March 2021, ePublication
  • International Journal of Toxicology, May 2011, pages 5S-16S
  • Skin Research and Technology, November 2007, pages 417-24
  • Journal of the American College of Toxicology, September 1985, pages 223-248
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

8th on the list, which puts it at an estimated 1–5% of the formula.

Hydration
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

9th on the list, which puts it at an estimated 1–5% of the formula.

Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester

Anti-Aging
10 Isododecane Emollient
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Solvent

10th on the list, which puts it at an estimated 1–5% of the formula.

2,2,4,6,6-Pentamethylheptane; Hydrocarbons, C4, 1,3-butadiene-free, polymd., triisobutylene fraction, hydrogenated

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

11th on the list, which puts it at an estimated 1–3% of the formula.

2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]

Anti-Aging
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line

12th on the list, which puts it at an estimated 1–3% of the formula.

1,1,1,3,5,5,5-Heptamethyl-3-octyl-trisiloxane

Hydration Silicone
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

13th on the list, which puts it at an estimated 1–3% of the formula.

Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone

Anti-Aging
14 Polysilicone-15 UV filter
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

14th on the list, which puts it at an estimated 1–3% of the formula.

Polysilicone-15 is the siloxane polymer that conforms generally to the formula:

Anti-Aging
15 Ceresin Texture agent
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

15th on the list, which puts it at an estimated 1–3% of the formula.

Ceresin. A complex combination of hydrocarbons produced by the purification of ozocerite with sulfuric acid and filtration through bone black to form waxy cakes

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

16th on the list, which puts it at an estimated 1–3% of the formula.

Camellia Japonica Seed Oil is the fixed oil expressed from the seeds of the Camellia, Camellia japonica L., Theaceae

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line

17th on the list, which puts it at an estimated 1–3% of the formula.

Silicones and siloxanes, diphenyl, trimethylsilyloxy phenyl, trimethylsilyl terminated

Silicone
18 Niacinamide Active
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Active

18th on the list, which puts it at an estimated 1–3% of the formula.

Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**

Soothing Anti-Aging Pore Minimizer
15 scientific references
  • International Journal of Dermatology, February 2021, pages 166-173
  • Biomolecules & Therapeutics, July 2019, pages 562-569
  • Experimental Dermatology, February 2019, pages 15-22
  • Dermatologic Therapy, September 2017, ePublication
  • Journal of Investigative Dermatology, May 2017, page S116
  • International Journal of Pharmaceutics, March 2017, pages 158-162
  • Facial Plastic Surgery Clinics of North America, May 2016, pages 145-152
  • Clinical, Cosmetic, and Investigational Dermatology, July 2015, pages 405-412
  • Skin Pharmacology and Physiology, June 2014, pages 311-315
  • International Journal of Pharmacy, January 2013, pages 192-201
  • Dermatoendrocrinology, July 2012, pages 308-319
  • International Journal of Toxicology, September 2005, pages 1-31
  • Dermatologic Surgery, July 2005, pages 860-865
  • International Journal of Cosmetic Science, October 2004, pages 231-238
  • Journal of Cosmetic Dermatology, April 2004, pages 88-93
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant, Texture agent

19th on the list, which puts it at an estimated 1–3% of the formula.

9-(Z)-Octadecanoic acid, 12-hydroxy- (9Z, 12R)-, homopolymer, ester with triglycerol

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant

20th on the list, which puts it at an estimated 1–3% of the formula.

Siloxanes and Silicones, dodecyl methyl, 3-(tri(oxy-2-hydroxypropylene))oxypropyl methyl, 2-trimethylsilylpoly(oxydimethylsilyl)ethyl methyl, dimethyl

Silicone
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

21st on the list, which puts it at an estimated 1–3% of the formula.

Dimethicone/Vinyl Dimethicone Crosspolymer is a crosslinked dimethyl siloxane polymer (silicone elastomer) that is formed by the reaction between Hydrogen Dimethicone or Bis-Hydrogen Dimethicone, and Vinyl Dimethicone or Bis-Vinyldimethicone.

Silicone
22 Sodium Chloride Texture agent
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

22nd on the list, which puts it at an estimated 1–3% of the formula.

Sodium chloride

23 1,2-hexanediol Solvent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Solvent

23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Surfactant, Texture agent

24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Polyglyceryl-4 Diisostearate/Polyhydroxystearate/Sebacate is a diester of a mixture of isostearic, polyhydroxystearic and sebacic acids with Polyglycerin-4

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer

Silicone Microplastic
26 Caprylyl Glycol Emollient
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient

26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Octane-1,2-diol

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Surfactant

27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Octanoic acid, monoester with glycerol

Hydration
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Phyllostachys Nigra Leaf Extract is the extract of the leaves of Phyllostachys nigra, Poaceae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Phyllostachys Pubescens Shoot Bark Extract is the extract of the shoot of the bark of Phyllostachys pubescens, Poaceae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

6-Amino-9-beta-D-ribofuranosyl-9H-purine

Soothing
8 scientific references
  • PubChem, Accessed May 2021, ePublication
  • Cosmetic Ingredient Review, September 2020, pages 1-38
  • Experimental Dermatology, August 2014, pages 553-554
  • Journal of Investigative Dermatology, August 2011, pages 526-546
  • International Journal of Cosmetic Science, December 2006, pages 447-451
  • British Journal of Pharmacology, October 2008, issue 4, pages 475-486
  • PloS One, May 2008 (ePublication)
  • >International Journal of Cosmetic Science, August 2006, pages 447-451
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Aspergillus Ferment is the product obtained by the fermentation of Aspergillus

Anti-Aging Evens Skin Tone Hydration
32 Tocopherol Antioxidant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Antioxidant

32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E

Anti-Aging Evens Skin Tone Soothing
4 scientific references
  • Journal or Agricultural and Food Chemistry, June 2010, pages 7013-7020
  • Journal of Investigative Dermatology, November 2001, pages 1212-1217
  • Canadian Family Physician, July 2006, pages 855-856
  • Dermatologic Surgery, April 1999, pages 311-315
33 Dipropylene Glycol Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent, Solvent

33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,1'-Oxydipropan-2-ol; Oxydipropan-2-ol; Hydroxypropyloxypropanol

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Solvent

34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Dihydroxypentane

Hydration
4 scientific references
  • https://thedermreviewcom/pentylene-glycol/
  • Regulatory Toxicology and Pharmacology, July 2017, pages 106-111
  • Prospector, June 2015, ePublication
  • International Journal of Toxicology, October 2012, pages 147S-168S
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Bambusa Vulgaris Water is an aqueous solution of the stem of distillate obtained from the Bamboo, Bambusa vulgaris, Poaceaea

36 Betaine Humectant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Texture agent

36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Methanaminium, 1-carboxy-N,N,N-trimethyl-, hydroxide, inner salt

Hydration
5 scientific references
  • International Journal of Toxicology, 2018, pages 28S-46S
  • Food Science and Biotechnology, October 2017, pages 1391-1397
  • The Journal of Chemical Physics, June 2015, ePublication
  • The American Journal of Clinical Nutrition, September 2004, pages 539-549
  • Skin Research and Technology, February 2003, pages 50-58
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

4-Pyrimidinecarboxylic Acid, 1,4,5,6,-Tetrahydro-2-Methyl-, (4S)-

Hydration Anti-Aging Evens Skin Tone
38 Panthenol Active
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Active

38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol

Hydration Soothing
7 scientific references
  • The Linus Pauling Institute, Oregon State University, Accessed April 2021, ePublication
  • International Journal of Cosmetic Science, December 2019, pages 534-547
  • Journal of Cosmetic Dermatology, January 2019, pages 346-354
  • Cosmetic Ingredient Review, March 2018, pages 1-51
  • The Journal of Dermatological Treatment, August 2017, pages 173-180
  • Journal of Cosmetic Science, August 2011, pages 361-370
  • American Journal of Clinical Dermatology, Volume 3, 2002, pages 427-433

People also compare

Products in the same category that share this formula's distinguishing ingredients.

Black Bamboo Top-to-Toe SPF Veil

Haruharu Wonder

Shares 11 key ingredients with Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++: Water, Butyloctyl Salicylate, Ethylhexyl Triazone, Dibutyl Adipate, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine

Black Bamboo Top-to-Toe SPF Veil SPF 50+ PA++++

Haruharu Wonder

Shares 11 key ingredients with Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++: Water, Butyloctyl Salicylate, Ethylhexyl Triazone, Dibutyl Adipate, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine

Oil Control Light Sunscreen

Celimax

Shares 11 key ingredients with Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++: Water, Dibutyl Adipate, Propylheptyl Caprylate, Butyloctyl Salicylate, Niacinamide

Oil Control Light Sunscreen SPF50+ PA++++

Celimax

Shares 11 key ingredients with Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++: Water, Dibutyl Adipate, Propylheptyl Caprylate, Butyloctyl Salicylate, Niacinamide

Heartleaf Silky Moisture Sun Cream

Anua

Shares 10 key ingredients with Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++: Water, Dibutyl Adipate, Ethylhexyl Triazone, Niacinamide, Caprylyl Methicone

Frequently asked questions

What ingredients are in Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++?

WATER, DIBUTYL ADIPATE, SYNTHETIC WAX, METHYL METHACRYLATE CROSSPOLYMER, BUTYLOCTYL SALICYLATE, CAPRYLYL TRIMETHICONE, BUTYLENE GLYCOL, PROPYLHEPTYL CAPRYLATE, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE, ISODODECANE, BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE, CAPRYLYL METHICONE, ETHYLHEXYL TRIAZONE, POLYSILICONE-15, CERESIN, CAMELLIA JAPONICA SEED OIL, DIPHENYLSILOXY PHENYL TRIMETHICONE, NIACINAMIDE, POLYGLYCERYL-3 POLYRICINOLEATE, LAURYL POLYGLYCERYL-3 POLYDIMETHYLSILOXYETHYL DIMETHICONE, DIMETHICONE/VINYL DIMETHICONE CROSSPOLYMER, SODIUM CHLORIDE, 1,2-HEXANEDIOL, POLYGLYCERYL-4 DIISOSTEARATE/POLYHYDROXYSTEARATE/SEBACATE, VINYL DIMETHICONE/METHICONE SILSESQUIOXANE CROSSPOLYMER, CAPRYLYL GLYCOL, GLYCERYL CAPRYLATE, PHYLLOSTACHYS NIGRA LEAF EXTRACT, PHYLLOSTACHYS PUBESCENS SHOOT BARK EXTRACT, ADENOSINE, ASPERGILLUS FERMENT, TOCOPHEROL, DIPROPYLENE GLYCOL, PENTYLENE GLYCOL, BAMBUSA VULGARIS WATER, BETAINE, ECTOIN, PANTHENOL.

What are the active ingredients in Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++?

NIACINAMIDE, PANTHENOL.

How do I use Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++?

At the last step of your skincare routine, twist the base to expose about 0.5cm of the stick and swipe it thoroughly across any exposed skin, like face, neck and shoulder. Carry around this portable sun stick with you and reapply every 2 hours for optimal protection.

What skin types is Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ good for?

Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry) skin.

Is Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ good for sensitive skin?

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Is Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ fungal acne safe?

5 ingredients could feed malassezia: Propylheptyl Caprylate, Camellia Japonica Seed Oil, Polyglyceryl-3 Polyricinoleate, Polyglyceryl-4 Diisostearate/polyhydroxystearate/sebacate, Glyceryl Caprylate. That describes the yeast's food supply, not a prediction that they will cause a breakout.

Can I use Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ while pregnant?

Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.

Is Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ fragrance free?

Yes. Reading the full ingredient list, this formula is fragrance-free.

Does Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ contain alcohol?

No. Reading the full ingredient list, this formula is no drying alcohol.

Is Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ silicone free?

No — it contains Caprylyl Trimethicone, Caprylyl Methicone, Polysilicone-15, Diphenylsiloxy Phenyl Trimethicone, Lauryl Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone.

Does Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ contain essential oils?

No. Reading the full ingredient list, this formula is essential-oil-free.

Is Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ paraben free?

Yes. Reading the full ingredient list, this formula is paraben-free.

What can I layer with Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++?

It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.

When should I apply Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++?

Use it in the morning, final morning step, before makeup.

How many ingredients does Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ have?

It lists 38 ingredients, of which 6 are recorded as actives.

Who makes Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++?

Haruharu Wonder, a brand based in Korea.

What UV filters are in Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++?

It filters UV with Uvinul A Plus (diethylamino hydroxybenzoyl hexyl benzoate), Tinosorb S (bis-ethylhexyloxyphenol methoxyphenyl triazine), Uvinul T 150 (ethylhexyl triazone), Parsol SLX (polysilicone-15).

Is Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ broad spectrum?

Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.

Does Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ leave a white cast?

Unlikely. It filters with organic (chemical) filters only, which dissolve into the formula rather than sitting on the surface, so they do not leave a white cast.

Is Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ reef safe?

It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.

Can I wear Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++ under makeup?

Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.

How often should I reapply Black Bamboo Daily Soothing Sun Shield SPF50+ PA++++?

Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.

Brand
Haruharu Wonder
Country
Korea

Reviews

0 total

Log in to leave a review.

No reviews yet. Be the first to share your thoughts.