1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
Torriden
DIVE-IN Low Molecular Hyaluronic Acid Serum
face serum
Torriden
face serum
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testUnlock the gateway to a realm of unparalleled skin hydration and rejuvenation with Torriden's DIVE-IN Low Molecular Hyaluronic Acid Serum. This serum is more than just a skincare product; it's a transformative elixir designed to elevate your daily routine into a ritual of self-indulgence and skin bliss. Its secret weapon? The groundbreaking 5D-Complex Hyaluronic Acid that swiftly quenches your skin's thirst for moisture, delivering an instant boost of hydration. Enriched with D-panthenol, allantoin, and madecassoside, it goes beyond hydration, soothing irritations and breathing new life into your complexion.
DIVE-IN Low Molecular Hyaluronic Acid Serum is a watery-light serum from Torriden, a brand based in Korea. The formula is built mainly around hydration. The ingredient list runs to 32 ingredients, each broken down in full below.
By its ingredient list the formula reads as very light — essentially a water-and-humectant base with little emollient weight. With almost no emollient load it should absorb quickly and finish close to matte. Hydration is handled by Butylene Glycol, Glycerin and Panthenol, humectants that pull water into the upper layers of skin rather than sealing it there.
Hydration: Very high. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Butylene Glycol, Glycerin, Panthenol and Sodium Hyaluronate.
Soothing: Moderate. Ingredients aimed at visible redness and reactivity, and here that comes from Panthenol, Allantoin, Madecassoside and Beta-glucan.
Barrier support: Moderate. Lipids and repair signals that support skin barrier integrity, and here that comes from Panthenol, Madecassoside, Ceramide NP and Cholesterol.
On richness alone it suits Combination (oily) and Oily skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on antioxidant protection, oil control, brightening and tone and cell renewal. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is fragrance-free, essential-oil-free, no drying alcohol, paraben-free, silicone-free and microplastic-free. Those claims come from the ingredient list itself, not from the packaging.
It can be used morning and evening. In a routine it goes after toner, before moisturiser. Apply to clean, dry skin and give it a minute to absorb before the next layer. Introduce one new treatment at a time so you can identify what is working.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Calms redness, irritation, and inflammation for sensitive skin
Brightens and balances complexion for a more uniform appearance
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
3rd on the list, which puts it at an estimated 5–20% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
6th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol
7th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium, salt
8th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Hyaluronic Acid is the hydrolysate of Hyaluronic Acid derived by acid, enzyme or other method of hydrolysis
9th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium Acetylhyaluronate
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium salt, polymer with 1,1'-sulfonylbis[ethene]
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Sodium Hyaluronate is the hydrolysate of Sodium Hyaluronate derived by acid, enzyme or other method of hydrolysis
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Urea, (2,5-dioxo-4-imidazolidinyl)-
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
alpha-D-Glucopyranoside, alpha-D-glucopyranosyl
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Methanaminium, 1-carboxy-N,N,N-trimethyl-, hydroxide, inner salt
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.
This product is the "Treat" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 32 ingredients on the label.
Draws water into the upper layers of skin
Sets the thickness, spread and stability of the formula
Dissolves and carries everything else
Changes how skin behaves rather than how it feels
Botanical material, usually for antioxidants or scent
Forms a film that slows water loss
Neutralises free radicals from UV and pollution
Calms visible redness and irritation
Lifts oil and dirt, or holds oil and water together
Softens and smooths by filling gaps between skin cells
Sets the acidity the formula needs to work
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
3rd on the list, which puts it at an estimated 5–20% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
4th on the list, which puts it at an estimated 2–10% of the formula.
1,1'-Oxydipropan-2-ol; Oxydipropan-2-ol; Hydroxypropyloxypropanol
5th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
6th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol
7th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium, salt
8th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Hyaluronic Acid is the hydrolysate of Hyaluronic Acid derived by acid, enzyme or other method of hydrolysis
9th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium Acetylhyaluronate
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium salt, polymer with 1,1'-sulfonylbis[ethene]
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Sodium Hyaluronate is the hydrolysate of Sodium Hyaluronate derived by acid, enzyme or other method of hydrolysis
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Urea, (2,5-dioxo-4-imidazolidinyl)-
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
alpha-D-Glucopyranoside, alpha-D-glucopyranosyl
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Methanaminium, 1-carboxy-N,N,N-trimethyl-, hydroxide, inner salt
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,3-dihydroxypropane
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Portulaca Oleracea Extract is an extract of the whole plant of the Purselane, Portulaca oleracea L., Portulacaceae
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hamamelis Virginiana Extract is the extract of the whole plant, Hamamelis virginiana, Hamamelidaceae.
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
O-6-Deoxy-α-L-mannopyranosyl-(1→4)-O-β-D-glucopyranosyl-(1→6)-β-D-glucopyranosyl (2α,3β,4α,6β)-2,3,6,23-tetrahydroxyurs-12-en-28-oate
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Urs-12-en-28-oic acid, 2,3,6,23-tetrahydroxy-, (2alpha,3beta,4alpha,6beta)-
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ceramide NP,1,3,4-Octadecanetriol, 2-Octadecanamide,Stearoyl-C18-Phytosphingosine,Stearoyl-4-Hydroxysphinganine
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
beta-Glucan is a polysaccharide consisting of b(1-3) linked glucose chains carrying b(1-6) linked glucose sidechains
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Malachite Extract is an extract of Malachite obtained by grinding the stone, subsequent solubilization by hydrochloric acid and neutralization by sodium bicarbonate
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Cholest-5-en-3-ol (beta)-
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Dihydroxypentane
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,5-Furandione, polymer with methoxyethene; copolymer of methyl vinyl ether and maleic anhydride
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2,3-Propanetriol, homopolymer, dodecanoates (1:1) (10 mol glycerol average molar ratio)
27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Xanthan gum
28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,3-Propanediol, 2-amino-2-(hydroxymethyl)-
29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Propenoic acid, polymer with 2,2-bis(hydroxymethyl)propane-1,3-diol 2-propenyl ether
30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Scutellaria Baicalensis Root Extract is an extract of the roots of the Scutellaria baicalensis, Lamiaceae
32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Paeonia Suffruticosa Root Extract is an extract of the roots of the Chinese Peony, Paeonia suffruticosa, Ranunculaceae
Products in the same category that share this formula's distinguishing ingredients.
Eqqualberry
Shares 12 key ingredients with DIVE-IN Low Molecular Hyaluronic Acid Serum: Water, Butylene Glycol, Glycerin, Betaine, Ceramide NP
Eqqualberry
Shares 12 key ingredients with DIVE-IN Low Molecular Hyaluronic Acid Serum: Water, Butylene Glycol, Glycerin, Betaine, Ceramide NP
Anua
Shares 12 key ingredients with DIVE-IN Low Molecular Hyaluronic Acid Serum: Water, Butylene Glycol, Glycerin, Trehalose, Allantoin
Torriden
Shares 12 key ingredients with DIVE-IN Low Molecular Hyaluronic Acid Serum: Water, Butylene Glycol, Glycerin, Ceramide NP, Allantoin
Eqqualberry
Shares 12 key ingredients with DIVE-IN Low Molecular Hyaluronic Acid Serum: Water, Butylene Glycol, Glycerin, Betaine, Sodium Hyaluronate
Missha
Shares 12 key ingredients with DIVE-IN Low Molecular Hyaluronic Acid Serum: Water, Glycerin, Butylene Glycol, Betaine, Trehalose
WATER, BUTYLENE GLYCOL, GLYCERIN, DIPROPYLENE GLYCOL, 1,2-HEXANEDIOL, PANTHENOL, SODIUM HYALURONATE, HYDROLYZED HYALURONIC ACID, SODIUM ACETYLATED HYALURONATE, SODIUM HYALURONATE CROSSPOLYMER, HYDROLYZED SODIUM HYALURONATE, ALLANTOIN, TREHALOSE, BETAINE, PROPANEDIOL, PORTULACA OLERACEA EXTRACT, HAMAMELIS VIRGINIANA EXTRACT, MADECASSOSIDE, MADECASSIC ACID, CERAMIDE NP, BETA-GLUCAN, MALACHITE EXTRACT, CHOLESTEROL, PENTYLENE GLYCOL, PVM/MA COPOLYMER, POLYGLYCERYL-10 LAURATE, XANTHAN GUM, TROMETHAMINE, CARBOMER, ETHYLHEXYLGLYCERIN, SCUTELLARIA BAICALENSIS ROOT EXTRACT, PAEONIA SUFFRUTICOSA ROOT EXTRACT.
PANTHENOL, SODIUM HYALURONATE, HYDROLYZED HYALURONIC ACID, SODIUM ACETYLATED HYALURONATE, SODIUM HYALURONATE CROSSPOLYMER, CERAMIDE NP.
Use the dropper to take 3–5 drops of the serum and spread evenly over your entire face. Apply multiple layers to your face for a better moisturizing effect.
Judged on how rich the formula reads from its ingredient list, it suits Combination (oily), Oily skin best. It is the least natural fit for Dry, Combination (dry) skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
One ingredient could feed malassezia: Polyglyceryl-10 Laurate. That describes the yeast's food supply, not a prediction that it will cause a breakout.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
Yes. Reading the full ingredient list, this formula is fragrance-free.
No. Reading the full ingredient list, this formula is no drying alcohol.
Yes. Reading the full ingredient list, this formula is silicone-free.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.
Use it morning and evening, after toner, before moisturiser.
It lists 32 ingredients, of which 6 are recorded as actives.
Torriden, a brand based in Korea.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect