KAINE
Green Fit Pro Sun
face neck sunscreen
KAINE
face neck sunscreen
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testThe Kaine Green Fit Pro Sun is a vegan-friendly powerhouse that combines chemical and mineral filters to offer robust SPF 50+ PA++++ sun defense. This innovative sunscreen doesn't back down, even in the sweltering summer heat, thanks to its sweat-resistant formula. Infused with skin-loving ingredients like panthenol, hyaluronic acid, and bambusa vulgaris water, it goes beyond protection to hydrate and soothe irritated skin, ensuring a comfortable and refreshed feeling throughout the day.
Green Fit Pro Sun is a lightweight sunscreen from KAINE. Its job is UV protection, with the rest of the formula working on hydration and soothing. The ingredient list runs to 47 ingredients, each broken down in full below.
By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Propanediol, Panthenol and Hyaluronic Acid, humectants that pull water into the upper layers of skin rather than sealing it there.
It uses a hybrid filter system — Titanium Dioxide, Uvinul A Plus, Tinosorb S, Uvinul T 150, Parsol SLX and Mexoryl SX — combining mineral and organic filters. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.
Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Propanediol, Panthenol, Hyaluronic Acid and Hydrolyzed Hyaluronic Acid.
Soothing: High. Ingredients aimed at visible redness and reactivity, and here that comes from Isononyl Isononanoate, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Panthenol and Phenethyl Benzoate.
On richness alone it suits Balanced, Combination (oily) and Oily skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on cell renewal and firmness signalling. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is fragrance-free, essential-oil-free, no drying alcohol, paraben-free, sulfate-free and dye-free. Those claims come from the ingredient list itself, not from the packaging.
Use it in the morning. In a routine it goes final morning step, before makeup. Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms. Reapply every two hours of sun exposure, and after swimming or towelling off. Let it set for a couple of minutes before makeup so it does not pill.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Calms redness, irritation, and inflammation for sensitive skin
Brightens and balances complexion for a more uniform appearance
Regulates sebum production to reduce shine and greasiness
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
Hybrid mineral and organic filter system · broad-spectrum through UVA I
Strong UVB and short-UVA protection, but it stops before UVA I — a mineral formula leaning on titanium dioxide alone needs zinc oxide beside it for deep UVA.
A photostable replacement for avobenzone: it peaks at 354 nm, deep in UVA I, and does not need a stabiliser to survive the day.
One of the most photostable filters in use, and it stabilises avobenzone and octinoxate alongside it. Oil-soluble, cosmetically light, no white cast.
The most efficient UVB absorber available by weight, which is why high-SPF formulas reach SPF 50+ without feeling heavy. Contributes nothing to UVA.
A polymer, so it stays on the surface of skin rather than penetrating — low irritation potential and no measurable systemic absorption.
Water-soluble UVA filter, which is unusual — most UVA filters are oil-soluble.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Dibutyl adipate
4th on the list, which puts it at an estimated 2–10% of the formula.
1,3-dihydroxypropane
5th on the list, which puts it at an estimated 2–10% of the formula.
Titanium dioxide (CI 77891)
7th on the list, which puts it at an estimated 1–5% of the formula.
Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester
8th on the list, which puts it at an estimated 1–5% of the formula.
Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Dihydroxypentane
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Chlorella Vulgaris Extract is an extract of the Alga, Chlorella vulgaris, Oocystaceae
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Camellia Sinensis Leaf Extract is an extract of the leaves of the Tea, Camellia sinensis, Theaceae
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Hyaluronic Acid is the hydrolysate of Hyaluronic Acid derived by acid, enzyme or other method of hydrolysis
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium, salt
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
Every filter in this formula is photostable
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Polymethylsilsesquioxane, Polysilicone-15
Polymethylsilsesquioxane, Methyl Methacrylate Crosspolymer
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.
This product is the "Protect" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 47 ingredients on the label.
Sets the thickness, spread and stability of the formula
Draws water into the upper layers of skin
Softens and smooths by filling gaps between skin cells
Forms a film that slows water loss
Dissolves and carries everything else
Absorbs or scatters ultraviolet light
Changes how skin behaves rather than how it feels
Botanical material, usually for antioxidants or scent
Lifts oil and dirt, or holds oil and water together
Neutralises free radicals from UV and pollution
Calms visible redness and irritation
Binds trace metals that would otherwise spoil the formula
Sets the acidity the formula needs to work
Keeps the product free of microbial growth
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Dibutyl adipate
3rd on the list, which puts it at an estimated 5–20% of the formula.
1,1'-Oxydipropan-2-ol; Oxydipropan-2-ol; Hydroxypropyloxypropanol
4th on the list, which puts it at an estimated 2–10% of the formula.
1,3-dihydroxypropane
5th on the list, which puts it at an estimated 2–10% of the formula.
Titanium dioxide (CI 77891)
6th on the list, which puts it at an estimated 2–10% of the formula.
3,5,5-Trimethylhexyl 3,5,5-trimethylhexanoate
7th on the list, which puts it at an estimated 1–5% of the formula.
Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester
8th on the list, which puts it at an estimated 1–5% of the formula.
Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol
9th on the list, which puts it at an estimated 1–5% of the formula.
Benzoic acid, 2-phenylethyl ester
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polymer formed by hydrolysis and condensation of methyltrimethoxysilane
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Dihydroxypentane
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Bambusa Vulgaris Water is an aqueous solution of the stem of distillate obtained from the Bamboo, Bambusa vulgaris, Poaceaea
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Chlorella Vulgaris Extract is an extract of the Alga, Chlorella vulgaris, Oocystaceae
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Camellia Sinensis Leaf Extract is an extract of the leaves of the Tea, Camellia sinensis, Theaceae
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Mentha Suaveolens Leaf Extract is an extract of the leaves of Mentha Suaveolens, Lamiaceae
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Thymus Vulgaris Leaf Extract is an extract of the leaves of the Thyme, Thymus vulgaris L., Lamiaceae
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Hyaluronic Acid is the hydrolysate of Hyaluronic Acid derived by acid, enzyme or other method of hydrolysis
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium, salt
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Alcohols, coco, mixed esters with octanoic and decanoic acids
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Propenoic acid, 2-methyl-, 1,2-ethanediyl ester, polymer with methyl 2-methyl-2-propenoate
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polysilicone-15 is the siloxane polymer that conforms generally to the formula:
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,3'-(1,4-Phenylenedimethylene)bis[7,7-dimethyl-2-oxo-bicyclo[2.2.1]heptane-1-methanesulfonic acid]
27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,2-Dimethyl-2-(2'-propenamido)ethanesulfonic acid, sodium salt, homopolymer
28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
12-Hydroxyoctadecanoic acid, homopolymer
29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1-hexadecanol, phosphate, potassium salt
30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium Acrylates Crosspolymer-2 is the sodium salt of a copolymer of acrylic acid, methacrylic acid or one or more of its simple esters crosslinked with ethylene diglycidyl ether
31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,3-Propanediol, 2-amino-2-(hydroxymethyl)-
32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Aluminium hydroxide
33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polyacrylate Crosspolymer-6 is a copolymer of ammonium acryloyldimethyltaurate, dimethylacrylamide, lauryl methacrylate and laureth-4 methacrylate, crosslinked with trimethylolpropane triacrylate
34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Stearic acid
35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Glucose
36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Fructooligosaccharides are oligosaccharides produced enzymatically from sugar beets and consist chiefly of kestose, nystose and fructosyl nystose
38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Fructose
39th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octadecanoic acid, 12-hydroxy-, homopolymer, ester with oxybis(propanediol)
40th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
41st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydroxypropyl Methylcellulose Stearoxy Ether is the reaction product of stearyl glycidyl ether and Hydroxypropyl Methylcellulose
42nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Propenoic acid, homopolymer, sodium salt
43rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
44th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Urea, (2,5-dioxo-4-imidazolidinyl)-
45th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
4-Pyrimidinecarboxylic Acid, 1,4,5,6,-Tetrahydro-2-Methyl-, (4S)-
46th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Docosan-1-ol
47th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Disodium dihydrogen ethylenediaminetetraacetate
Products in the same category that share this formula's distinguishing ingredients.
Dr. Ceuracle
Shares 13 key ingredients with Green Fit Pro Sun: Water, Dibutyl Adipate, Propanediol, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid
Dr. Ceuracle
Shares 13 key ingredients with Green Fit Pro Sun: Water, Dibutyl Adipate, Propanediol, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid
Haruharu Wonder
Shares 11 key ingredients with Green Fit Pro Sun: Water, Ethylhexyl Triazone, Dibutyl Adipate, Terephthalylidene Dicamphor Sulfonic Acid, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine
Haruharu Wonder
Shares 11 key ingredients with Green Fit Pro Sun: Water, Ethylhexyl Triazone, Dibutyl Adipate, Terephthalylidene Dicamphor Sulfonic Acid, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine
Torriden
Shares 11 key ingredients with Green Fit Pro Sun: Water, Dibutyl Adipate, Propanediol, Ethylhexyl Triazone, Titanium Dioxide
Anua
Shares 11 key ingredients with Green Fit Pro Sun: Water, Dibutyl Adipate, Propanediol, Ethylhexyl Triazone, Terephthalylidene Dicamphor Sulfonic Acid
WATER, DIBUTYL ADIPATE, DIPROPYLENE GLYCOL, PROPANEDIOL, TITANIUM DIOXIDE, ISONONYL ISONONANOATE, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE, PANTHENOL, PHENETHYL BENZOATE, 1,2-HEXANEDIOL, POLYMETHYLSILSESQUIOXANE, PENTYLENE GLYCOL, BAMBUSA VULGARIS WATER, CHLORELLA VULGARIS EXTRACT, CAMELLIA SINENSIS LEAF EXTRACT, MENTHA SUAVEOLENS LEAF EXTRACT, THYMUS VULGARIS LEAF EXTRACT, HYALURONIC ACID, HYDROLYZED HYALURONIC ACID, SODIUM HYALURONATE, BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE, COCO-CAPRYLATE/CAPRATE, ETHYLHEXYL TRIAZONE, METHYL METHACRYLATE CROSSPOLYMER, POLYSILICONE-15, TEREPHTHALYLIDENE DICAMPHOR SULFONIC ACID, SODIUM POLYACRYLOYLDIMETHYL TAURATE, POLYHYDROXYSTEARIC ACID, POTASSIUM CETYL PHOSPHATE, SODIUM ACRYLATES CROSSPOLYMER-2, TROMETHAMINE, ALUMINUM HYDROXIDE, POLYACRYLATE CROSSPOLYMER-6, STEARIC ACID, GLUCOSE, BUTYLENE GLYCOL, FRUCTOOLIGOSACCHARIDES, FRUCTOSE, POLYGLYCERYL-2 DIPOLYHYDROXYSTEARATE, ETHYLHEXYLGLYCERIN, HYDROXYPROPYL METHYLCELLULOSE STEAROXY ETHER, SODIUM POLYACRYLATE, TOCOPHEROL, ALLANTOIN, ECTOIN, BEHENYL ALCOHOL, DISODIUM EDTA.
PANTHENOL, HYALURONIC ACID, HYDROLYZED HYALURONIC ACID, SODIUM HYALURONATE.
Apply at the last step of skin care, apply evenly over face and neck.
Judged on how rich the formula reads from its ingredient list, it suits Balanced, Combination (oily), Oily skin best. It is the least natural fit for Dry, Combination (dry) skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
One ingredient could feed malassezia: Polyglyceryl-2 Dipolyhydroxystearate. That describes the yeast's food supply, not a prediction that it will cause a breakout.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
Yes. Reading the full ingredient list, this formula is fragrance-free.
No. Reading the full ingredient list, this formula is no drying alcohol.
No — it contains Polymethylsilsesquioxane, Polysilicone-15.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.
Use it in the morning, final morning step, before makeup.
It lists 47 ingredients, of which 10 are recorded as actives.
KAINE.
It filters UV with Titanium Dioxide (titanium dioxide), Uvinul A Plus (diethylamino hydroxybenzoyl hexyl benzoate), Tinosorb S (bis-ethylhexyloxyphenol methoxyphenyl triazine), Uvinul T 150 (ethylhexyl triazone), Parsol SLX (polysilicone-15), Mexoryl SX (terephthalylidene dicamphor sulfonic acid).
Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.
It may leave a slight cast. The formula mixes mineral and organic filters, so any cast is usually lighter than a fully mineral sunscreen's.
It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.
Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.
Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect