1st on the list, which puts it at an estimated 10–40% of the formula.
Bifida Ferment Lysate is a lysate of the product obtained by the fermentation of Bifida
Numbuzin
No.3 Bifida Bakuchiol Zero Pore Milky Moisturizer
face moisturizer
Numbuzin
face moisturizer
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testKorea's #1 toner, now reimagined as a milky moisturizer. Tightens pores, smooths uneven texture, and supports a more even skin tone while delivering deep, 24-hour hydration from within. Clinically tested to target pores from five angles and powered by Bakuchiol and Kojic Acid.
No.3 Bifida Bakuchiol Zero Pore Milky Moisturizer is a lightweight moisturizer from Numbuzin, a brand based in Korean. The formula is built mainly around hydration. The ingredient list runs to 50 ingredients, each broken down in full below.
By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Glycerin, Diglycerin and Butylene Glycol, humectants that pull water into the upper layers of skin rather than sealing it there.
Hydration: Very high. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Glycerin, Diglycerin, Butylene Glycol and Lauryl Betaine.
Soothing: Moderate. Ingredients aimed at visible redness and reactivity, and here that comes from Allantoin, Bifida Ferment Lysate, Niacinamide and Adenosine.
Brightening: Moderate. Ingredients that act on uneven tone and post-inflammatory marks, and here that comes from Niacinamide, Kojic Acid, Galactomyces Ferment Filtrate and Tocopherol.
On richness alone it suits Balanced, Combination (oily) and Oily skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on antioxidant protection, cell renewal and firmness signalling. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is fragrance-free, essential-oil-free, paraben-free, microplastic-free, sulfate-free and dye-free. Those claims come from the ingredient list itself, not from the packaging. It does contain drying alcohol, worth knowing if your skin reacts to any of them.
It can be used morning and evening. In a routine it goes after serums. Seal in your serums with it; in the morning, sunscreen still goes on top.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Calms redness, irritation, and inflammation for sensitive skin
Brightens and balances complexion for a more uniform appearance
Fades hyperpigmentation and evens out dark spots over time
Tightens and refines the look of enlarged pores
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 10–40% of the formula.
Bifida Ferment Lysate is a lysate of the product obtained by the fermentation of Bifida
2nd on the list, which puts it at an estimated 5–20% of the formula.
Galactomyces Ferment Filtrate is a filtrate of the product obtained by the fermentation of the microorganism Galactomyces
3rd on the list, which puts it at an estimated 5–20% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
4th on the list, which puts it at an estimated 2–10% of the formula.
Oxybispropanediol
5th on the list, which puts it at an estimated 2–10% of the formula.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
6th on the list, which puts it at an estimated 2–10% of the formula.
Propane-1,2,3-triyl 2-ethylhexanoate
8th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
9th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Propene, 2-methyl-, homopolymer
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, (32 mol EO average molar ratio)
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
.Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, (8 mol EO average molar ratio)
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ethanol
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Alcohol
Diphenylsiloxy Phenyl Trimethicone, Peg-10 Dimethicone
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.
This product is the "Moisturise" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 50 ingredients on the label.
Sets the thickness, spread and stability of the formula
Dissolves and carries everything else
Draws water into the upper layers of skin
Lifts oil and dirt, or holds oil and water together
Botanical material, usually for antioxidants or scent
Softens and smooths by filling gaps between skin cells
Forms a film that slows water loss
Neutralises free radicals from UV and pollution
Keeps the product free of microbial growth
Changes how skin behaves rather than how it feels
Calms visible redness and irritation
Sets the acidity the formula needs to work
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 10–40% of the formula.
Bifida Ferment Lysate is a lysate of the product obtained by the fermentation of Bifida
2nd on the list, which puts it at an estimated 5–20% of the formula.
Galactomyces Ferment Filtrate is a filtrate of the product obtained by the fermentation of the microorganism Galactomyces
3rd on the list, which puts it at an estimated 5–20% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
4th on the list, which puts it at an estimated 2–10% of the formula.
Oxybispropanediol
5th on the list, which puts it at an estimated 2–10% of the formula.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
6th on the list, which puts it at an estimated 2–10% of the formula.
Propane-1,2,3-triyl 2-ethylhexanoate
7th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
8th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
9th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Propene, 2-methyl-, homopolymer
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,1'-Oxydipropan-2-ol; Oxydipropan-2-ol; Hydroxypropyloxypropanol
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Silicones and siloxanes, diphenyl, trimethylsilyloxy phenyl, trimethylsilyl terminated
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, (32 mol EO average molar ratio)
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
.Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, (8 mol EO average molar ratio)
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ethanol
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
N-(1-Oxododecyl)-L-glutamic acid, phytosterols and 2-octyl-1-dodecanol ester
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Castor oil (Ricinus communis), hydrogenated, ethoxylated (60 mol EO average molar ratio)
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,6,10,15,19,23-Hexamethyltetracosane
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Alcohols, C16-18
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octane-1,2-diol
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
SilIcones and siloxanes, dimethyl, hydropoly(oxy-1,2-ethanediyl methyl, trimethylsilyl terminated (10 mol EO average molar ratio)
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
(Carboxylatomethyl)dodecyldimethylammonium
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
C10-30 alkyl propenoate, polymer with propenoic acid, butenoic acidand/or alkyl propenoates, product with propenyl sucrose ether or propenyl 2,2-dihydroxymethyl-1,3-propanediol
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
12-Hydroxyoctadecanoic acid, homopolymer, diesters with .alpha.-hydro-.omega.-hydroxypoly(oxy-1,2-ethanediyl) (30 mol EO average molar ratio)
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1-Propanesulfonic acid, 2-methyl-2-[(1-oxo-2-propenyl)amino]-, monoammonium salt, homopolymer
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,3-Propanediol, 2-amino-2-(hydroxymethyl)-
27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Propenoic acid, polymer with 2,2-bis(hydroxymethyl)propane-1,3-diol 2-propenyl ether
28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Xanthan gum
29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Urea, (2,5-dioxo-4-imidazolidinyl)-
31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
6-Amino-9-beta-D-ribofuranosyl-9H-purine
32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,3-dihydroxypropane
34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Coptis Japonica Root Extract is an extract of the roots of Coptis japonica, Ranunculaceae
35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2,3-Propanetriol, homopolymer, octadecanoates (1:1) (10 mol glycerol average molar ratio)
36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Lecithins, hydrogenated
37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Cynanchum Atratum Extract is the extract of the whole plant Cynanchum atratum, Apocynaceae.
38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Althaea Rosea Flower Extract is the extract of the flowers of the hollyhock, Althaea rosea, Malvaceae
39th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
40th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
5-Hydroxy-2-hydroxymethyl-4-pyrone
41st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium hydrogen N-(1-oxooctadecyl)-L-glutamate
42nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Bakuchiol (babchi seed extract) is a plant-based retinol alternative that softens wrinkles and fades dark spots with less irritation. IUPAC name: 4-[(1E,3S)-3,7-dimethyl-3-vinylocta-1,6-dien-1-yl]phenol
43rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Lactobacillus/Soybean Ferment Extract is an extract of the fermentation of soybean by the microorganism Lactobacillus
44th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Saccharomyces/Copper Ferment is an extract of the product obtained by the fermentation of Saccharomyces in the presence of copper ions
45th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Saccharomyces/Iron Ferment is the product obtained by the fermentation of Saccharomyces in the presence of iron ions
46th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Saccharomyces/Magnesium Ferment is the product obtained by the fermentation of Saccharomyces in the presence of magnesium ions
47th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Saccharomyces/Silicon Ferment is the product obtained by the fermentation of Saccharomyces in the presence of silicon
48th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Saccharomyces/Zinc Ferment is the product obtained by the fermentation product of Saccharomyces in the presence of zinc ions
49th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Leuconostoc/Radish Root Ferment Filtrate is a filtrate of the product obtained by the fermentation of Raphanus sativus roots by the microorganism, Leuconostoc
50th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Pullulan is a polysaccharide produced from starch by cultivating the yeast, Aureobasidium pullulans
Products in the same category that share this formula's distinguishing ingredients.
KLAVUU
Shares 6 key ingredients with No.3 Bifida Bakuchiol Zero Pore Milky Moisturizer: Water, Glycerin, Niacinamide, Hydrogenated Polyisobutene, Alcohol
Isntree
Shares 6 key ingredients with No.3 Bifida Bakuchiol Zero Pore Milky Moisturizer: Water, Glycerin, Diglycerin, Hydrogenated Polyisobutene, Butylene Glycol
Dr.Melaxin
Shares 5 key ingredients with No.3 Bifida Bakuchiol Zero Pore Milky Moisturizer: Water, Glycerin, Diglycerin, Niacinamide, Butylene Glycol
Dr.Melaxin
Shares 5 key ingredients with No.3 Bifida Bakuchiol Zero Pore Milky Moisturizer: Water, Glycerin, Niacinamide, Butylene Glycol, Hydrogenated Polyisobutene
By Wishtrend
Shares 5 key ingredients with No.3 Bifida Bakuchiol Zero Pore Milky Moisturizer: Water, Butylene Glycol, Glycerin, Niacinamide, Hydrogenated Polyisobutene
Abib
Shares 5 key ingredients with No.3 Bifida Bakuchiol Zero Pore Milky Moisturizer: Water, Glycerin, Triethylhexanoin, Niacinamide, Butylene Glycol
BIFIDA FERMENT LYSATE, GALACTOMYCES FERMENT FILTRATE, GLYCERIN, DIGLYCERIN, BUTYLENE GLYCOL, TRIETHYLHEXANOIN, 1,2-HEXANEDIOL, NIACINAMIDE, HYDROGENATED POLYISOBUTENE, DIPROPYLENE GLYCOL, WATER, DIPHENYLSILOXY PHENYL TRIMETHICONE, PEG-32, PEG-8, ALCOHOL, PHYTOSTERYL/OCTYLDODECYL LAUROYL GLUTAMATE, PEG-60 HYDROGENATED CASTOR OIL, SQUALANE, CETEARYL ALCOHOL, CAPRYLYL GLYCOL, PEG-10 DIMETHICONE, LAURYL BETAINE, ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER, PEG-30 DIPOLYHYDROXYSTEARATE, AMMONIUM POLYACRYLOYLDIMETHYL TAURATE, TROMETHAMINE, CARBOMER, XANTHAN GUM, ETHYLHEXYLGLYCERIN, ALLANTOIN, ADENOSINE, SODIUM DILAURAMIDOGLUTAMIDE LYSINE, PROPANEDIOL, COPTIS JAPONICA ROOT EXTRACT, POLYGLYCERYL-10 STEARATE, HYDROGENATED LECITHIN, CYNANCHUM ATRATUM EXTRACT, ALTHAEA ROSEA FLOWER EXTRACT, TOCOPHEROL, KOJIC ACID, SODIUM STEAROYL GLUTAMATE, BAKUCHIOL, LACTOBACILLUS/SOYBEAN FERMENT EXTRACT, SACCHAROMYCES/COPPER FERMENT, SACCHAROMYCES/IRON FERMENT, SACCHAROMYCES/MAGNESIUM FERMENT, SACCHAROMYCES/SILICON FERMENT, SACCHAROMYCES/ZINC FERMENT, LEUCONOSTOC/RADISH ROOT FERMENT FILTRATE, PULLULAN.
NIACINAMIDE, BAKUCHIOL.
Apply it after serums. Seal in your serums with it; in the morning, sunscreen still goes on top.
Judged on how rich the formula reads from its ingredient list, it suits Balanced, Combination (oily), Oily skin best. It is the least natural fit for Dry, Combination (dry) skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
10 ingredients could feed malassezia: Bifida Ferment Lysate, Galactomyces Ferment Filtrate, Peg-30 Dipolyhydroxystearate, Polyglyceryl-10 Stearate, Lactobacillus/soybean Ferment Extract, Saccharomyces/copper Ferment, Saccharomyces/iron Ferment, Saccharomyces/magnesium Ferment. That describes the yeast's food supply, not a prediction that they will cause a breakout.
It contains Kojic Acid, which are usually reviewed with a doctor during pregnancy. Ask your doctor or midwife before using it.
Yes. Reading the full ingredient list, this formula is fragrance-free.
Yes — it contains Alcohol.
No — it contains Diphenylsiloxy Phenyl Trimethicone, Peg-10 Dimethicone.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.
Use it morning and evening, after serums.
It lists 50 ingredients, of which 2 are recorded as actives.
Numbuzin, a brand based in Korean.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect