Payot Tinted Anti-Redness CC Cream

Payot

Tinted Anti-Redness CC Cream

face tinted bb cream/cc cream

Added Last edited

Fit by skin type

General, ingredient-based — not your personalized match.

Dry
57%
Combination (dry)
57%
Balanced
87%
Combination (oily)
83%
Oily
83%

See how this fits your skin

Take the skin test and I'll show you how suitable this product is for you.

Take the skin test
43
Ingredients
5
Benefits
3
Actives
Find Dupes

The anti-redness corrective care for reactive complexions. Designed for skin prone to visible redness, this multi-function tinted care soothes, corrects and protects in a single gesture. Its calming action helps reduce existing redness while preventing new flushes from appearing, and its tinted formula immediately conceals uneven areas. The ultra-fine texture melts into the skin for a natural colour correction. Concentrated in encapsulated pigments, it releases its colour on contact with the skin to deliver a tone-on-tone effect adjusted to your complexion. Fragrance-free.

Key Insights

Benefits

5
Anti-Aging
Evens Skin Tone
Hydration
Oil Control
Soothing

Active Ingredients

3
Hyaluronic acid Signal peptides Vitamin B5 (panthenol)

Risks

5
Alcohol
Allergen
Microplastic
Silicone
Synthetic polymer

About Tinted Anti-Redness CC Cream

Overview

Tinted Anti-Redness CC Cream is a lightweight tinted bb cream / cc cream from Payot. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 43 ingredients, each broken down in full below.

Texture and finish

By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Glycerin, Diglycerin and Butylene Glycol, humectants that pull water into the upper layers of skin rather than sealing it there.

UV filter system

It uses a hybrid filter system — Octinoxate, Uvinul A Plus, Octisalate, Uvinul T 150, Titanium Dioxide and Tinosorb S — combining mineral and organic filters. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. The formula contains a photounstable filter alongside a stabiliser, which is the standard and effective way to keep it from degrading in sunlight.

What the formula does

Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Glycerin, Diglycerin, Butylene Glycol and Sodium Hyaluronate.

Soothing: Moderate. Ingredients aimed at visible redness and reactivity, and here that comes from Diethylamino Hydroxybenzoyl Hexyl Benzoate, Asiaticoside, Panthenol and Sodium Hyaluronate.

Who it suits

On richness alone it suits Balanced, Combination (oily) and Oily skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.

What it does not target

The formula contributes little or nothing on barrier support, antioxidant protection, brightening and tone and cell renewal. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.

What is not in it

Reading the full list, the formula is essential-oil-free, no drying alcohol, paraben-free, sulfate-free, oil-free and no animal-derived ingredients. Those claims come from the ingredient list itself, not from the packaging. It does contain fragrance, worth knowing if your skin reacts to any of them.

Where it fits in a routine

Use it in the morning. In a routine it goes taken with food. Follow the dose on the pack and check interactions with anything you already take. It carries UV filters, so it belongs in your morning routine.

This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.

Pros and cons

Drawn purely from the ingredient list

Pros

  • Broad-spectrum coverage that reaches into UVA I
  • No essential oils
  • No drying alcohol
  • Strong humectant content for hydration
  • No common irritants flagged in the list

Things to know

  • Contains fragrance or declared fragrance allergens
  • Contains a solid synthetic polymer (microplastic)
  • 2 ingredients could feed malassezia (fungal acne)

Which skin types it suits

Scored on how rich or light the formula reads from its INCI order.

Suitable for

  • Balanced skin
  • Combination (oily) skin
  • Oily skin

Less suitable for

  • Dry skin
  • Combination (dry) skin

Sensitive skin

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Skin concerns

Based on the curated benefits documented for this product's ingredients.

Helps with

  • Hydration 13 ingredients

    Attracts and locks in moisture to keep skin plump and dewy

  • Anti-Aging 11 ingredients

    Boosts collagen and cell turnover to reduce fine lines and wrinkles

  • Soothing 5 ingredients

    Calms redness, irritation, and inflammation for sensitive skin

  • Oil Control 2 ingredients

    Regulates sebum production to reduce shine and greasiness

  • Evens Skin Tone 1 ingredient

    Brightens and balances complexion for a more uniform appearance

Does not target

Anti-Acne Blackhead Reducing Dark Spot Fading Pore Minimizer Smooths Bumpy Skin

None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.

UV filters

Hybrid mineral and organic filter system · broad-spectrum through UVA I

Octinoxate

ethylhexyl methoxycinnamate
Protects from
UVB (290–320 nm)
Photostable
No — degrades in sunlight
Generation
First-generation UVB filter
Approved in
EU, UK, Korea, Japan, US — banned in Hawaii and Key West
Maximum permitted level
Up to 10% (EU), 7.5% (US)

Efficient UVB absorber that degrades in sunlight on its own, and destabilises avobenzone when the two are formulated together without a quencher.

Uvinul A Plus

diethylamino hydroxybenzoyl hexyl benzoate
Protects from
UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation UVA filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

A photostable replacement for avobenzone: it peaks at 354 nm, deep in UVA I, and does not need a stabiliser to survive the day.

Octisalate

ethylhexyl salicylate
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
First-generation UVB filter
Approved in
Approved worldwide
Maximum permitted level
Up to 5% (EU, US)

A weak filter used mainly as a solvent — it dissolves the crystalline filters (avobenzone, oxybenzone) so they can be formulated at all.

Uvinul T 150

ethylhexyl triazone
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
Next-generation UVB filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 5% (EU)

The most efficient UVB absorber available by weight, which is why high-SPF formulas reach SPF 50+ without feeling heavy. Contributes nothing to UVA.

Titanium Dioxide

titanium dioxide
Protects from
UVB (290–320 nm), UVA II (320–340 nm)
Photostable
Yes — photostable
Generation
Mineral (inorganic) filter
Approved in
Approved worldwide
Maximum permitted level
Up to 25% (EU, US, KR)

Strong UVB and short-UVA protection, but it stops before UVA I — a mineral formula leaning on titanium dioxide alone needs zinc oxide beside it for deep UVA.

Tinosorb S

bis-ethylhexyloxyphenol methoxyphenyl triazine
Protects from
UVB (290–320 nm), UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation broad-spectrum filter
Approved in
EU, UK, Korea, Japan, Australia — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

One of the most photostable filters in use, and it stabilises avobenzone and octinoxate alongside it. Oil-soluble, cosmetically light, no white cast.

Key ingredients

The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.

2nd on the list. Regulation caps it at 10%, so it is present at roughly 5–10%.

2-Ethylhexyl 4-methoxycinnamate

Anti-Aging

4th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.

2-Ethylhexyl salicylate

Anti-Aging

5th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.

Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone

Anti-Aging

6th on the list, which puts it at an estimated 2–10% of the formula.

Carbonic Acid, Dicaprylyl Ester

Hydration

8th on the list, which puts it at an estimated 1–5% of the formula.

Alcohols, C16-18

Hydration

10th on the list, which puts it at an estimated 1–5% of the formula.

Dibutyl adipate

Hydration

11th on the list, which puts it at an estimated 1–3% of the formula.

Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane

Hydration Anti-Aging

12th on the list, which puts it at an estimated 1–3% of the formula.

Isopentyl laurate

Hydration

16th on the list, which puts it at an estimated 1–3% of the formula.

Oxybispropanediol

Hydration

17th on the list, which puts it at an estimated 1–3% of the formula.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration

Formula analysis

Each axis is scored from the ingredients present and how high up the list they sit.

Hydration High

Ingredients that pull and hold water in the upper layers of skin

Barrier support None

Lipids and repair signals that support skin barrier integrity

Antioxidant support None

Ingredients that mop up free radicals from UV and pollution

Oil control Low

Ingredients that moderate sebum or absorb shine

Brightening None

Ingredients that act on uneven tone and post-inflammatory marks

Soothing Moderate

Ingredients aimed at visible redness and reactivity

Cell renewal None

Retinoids, acids and enzymes that speed surface turnover

Firmness signalling None

Peptides and growth factors that signal for collagen support

Photostability High

A photounstable filter is present, paired with a stabiliser

Active and supporting ingredients

"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.

Supporting ingredients (35)

Solvents, emollients, texture agents and preservatives — the formula that carries the actives.

Aqua Dicaprylyl Carbonate CI 77891 Cetearyl Alcohol Cetearyl Glucoside Dibutyl Adipate Glycerin Isoamyl Laurate Polymethyl Methacrylate Ptfe Diglycerin Butylene Glycol Dimethicone Asiaticoside Tocopheryl Acetate Sodium Stearoyl Glutamate Sodium Cocoyl Glutamate Disodium Cocoyl Glutamate Xanthan Gum Tocopherol Isopropyl Myristate Acrylates/ammonium Methacrylate Copolymer Sodium Polyacrylate Chlorphenesin Sodium Chloride BHT Dextran Triethyl Citrate O-cymen-5-ol Benzyl Alcohol Phenoxyethanol Mica CI 77499 CI 77491 CI 77492

What is and is not in it

Read from the full ingredient list. A brand's own claim may differ.

Free from

  • Essential-oil-free
  • No drying alcohol
  • Paraben-free
  • Sulfate-free
  • Oil-free
  • No animal-derived ingredients

Contains

  • Fragrance

    Benzyl Alcohol

  • Silicones

    Dimethicone

  • Microplastics

    Polymethyl Methacrylate

  • Added colour

    CI 77891, Mica, CI 77499, CI 77491, CI 77492

What to layer it with

Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.

Compatible with

  • Vitamin C (L-ascorbic acid)
  • Retinoids (retinol, retinal)
  • AHAs (glycolic, lactic)
  • BHA (salicylic acid)
  • PHAs (gluconolactone)
  • Benzoyl peroxide
  • Azelaic acid
  • Copper peptides
  • Bakuchiol
  • Niacinamide
  • Hyaluronic acid
  • Ceramides
  • Signal peptides
  • Panthenol
  • Sunscreen

Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.

Where it fits in a routine

Morning
  • Follow the dose on the pack and check interactions with anything you already take.
  • It carries UV filters, so it belongs in your morning routine.

Safety and suitability

Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.

Pregnancy and breastfeeding
Nothing in this formula is on the standard pregnancy-caution list. That is not clearance — ask your doctor about anything you use daily.
Fungal acne (malassezia)
2 ingredients could feed malassezia: Isoamyl Laurate, Isopropyl Myristate. That is about the yeast's food supply, not a prediction that you will break out.
Sensitive and reactive skin
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Recorded ingredient risks
Alcohol, Allergen, Microplastic, Silicone, Synthetic polymer

Ingredients by function

Most ingredients do more than one job, so these counts add up to more than the 43 ingredients on the label.

11
Texture agent

Sets the thickness, spread and stability of the formula

7
Emollient

Softens and smooths by filling gaps between skin cells

7
Occlusive

Forms a film that slows water loss

6
Fragrance / colour

Changes how the product smells or looks

6
Surfactant

Lifts oil and dirt, or holds oil and water together

6
UV filter

Absorbs or scatters ultraviolet light

5
Solvent

Dissolves and carries everything else

4
Antioxidant

Neutralises free radicals from UV and pollution

4
Humectant

Draws water into the upper layers of skin

4
Preservative

Keeps the product free of microbial growth

3
Active

Changes how skin behaves rather than how it feels

1
Peptide

Amino-acid chains that signal for repair or firmness

Ingredient breakdown

Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.

1 Aqua Solvent
Estimated level
30–80%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

1st on the list, which puts it at an estimated 30–80% of the formula.

Water

Estimated level
5–10%
Confidence
High — bounded by a regulatory limit
Roles
UV filter

2nd on the list. Regulation caps it at 10%, so it is present at roughly 5–10%.

2-Ethylhexyl 4-methoxycinnamate

Anti-Aging
8 scientific references
  • 5 Super Anti-Aging Antioxidants Your Skin Needs
  • How to Keep Your Neck & Chest Looking Young
  • Acne & Aging Skin
  • How to Diminish Uneven Skin Tone and Get Your Glow Back
  • What Are Peptides and What Do They Do for Skin?
  • The Truth About Firming Creams
  • Top 5 Reasons to Add Antioxidants to Your Skin Care Routine
  • Anti-Aging Superstars
Estimated level
5–10%
Confidence
High — bounded by a regulatory limit
Roles
UV filter

3rd on the list. Regulation caps it at 10%, so it is present at roughly 5–10%.

Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester

Anti-Aging
Estimated level
2–5%
Confidence
High — bounded by a regulatory limit
Roles
UV filter

4th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.

2-Ethylhexyl salicylate

Anti-Aging
7 scientific references
  • JAMA, January 2020, ePublication
  • Cosmetic Ingredient Review, June 2019, pages 1-60
  • Photochemical & Photobiological Sciences, June 2019, pages 1, 556–1, 564
  • Catalysts, November 2017, ePublication
  • Journal of the American Academy of Dermatology, June 2005, pages 937–956
  • Skin Pharmacology and Applied Physiology, January-February 2003, pages 28–35
  • International Journal of Toxicology, 2003, pages 1–108
Estimated level
2–5%
Confidence
High — bounded by a regulatory limit
Roles
UV filter

5th on the list. Regulation caps it at 5%, so it is present at roughly 2–5%.

Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone

Anti-Aging
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

6th on the list, which puts it at an estimated 2–10% of the formula.

Carbonic Acid, Dicaprylyl Ester

Hydration
5 scientific references
  • OCL, April 2018, pages 1-10
  • Journal of Surfactants and Detergents, July 2017, pages 1, 337–1, 349
  • Cosmetic Ingredient Review, December 2016, pages 1-50
  • https://wwwcir-safetyorg/sites/default/files/dialkyl%20carbonatespdf
  • https://wwwulprospectorcom/en/na/PersonalCare/Detail/75/204256/Cetiol-CC
7 CI 77891 UV filter
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter, Fragrance / colour

7th on the list, which puts it at an estimated 1–5% of the formula.

CI 77891 is classed chemically as an inorganic colour (see also INCI: Titanium dioxide). It conforms to the formula

8 Cetearyl Alcohol Emollient
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Surfactant, Texture agent

8th on the list, which puts it at an estimated 1–5% of the formula.

Alcohols, C16-18

Hydration
4 scientific references
  • CosmeticsInfoorg, Accessed March 2021, ePublication
  • FDA Cosmetic Labeling Claims, August 2020, ePublication
  • Journal of the Society of Cosmetic Scientists of Korea, June 2009, pages 103-110
  • Journal of the American College of Toxicology, 1988, pages 359-413
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant

9th on the list, which puts it at an estimated 1–5% of the formula.

D-Glucopyranose, C16-18 alkyl glycosides

10 Dibutyl Adipate Emollient
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Occlusive, Solvent

10th on the list, which puts it at an estimated 1–5% of the formula.

Dibutyl adipate

Hydration
11 Glycerin Humectant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Occlusive, Texture agent, Solvent

11th on the list, which puts it at an estimated 1–3% of the formula.

Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane

Hydration Anti-Aging
6 scientific references
  • Journal of Pharmaceutical Investigation, March 2021, pages 223-231
  • International Journal of Toxicology, November/December 2019, Volume 38, Supplement 3, pages 6S-22S
  • International Journal of Cosmetic Science, August 2016, ePublication
  • British Journal of Dermatology, July 2008, pages 23-34
  • Journal of Cosmetic Dermatology, June 2007, pages 75-82
  • Proceedings of the National Academy of Sciences, June 2003, pages 7, 360-7, 365
12 Isoamyl Laurate Emollient
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient

12th on the list, which puts it at an estimated 1–3% of the formula.

Isopentyl laurate

Hydration
2 scientific references
  • International Journal of Toxicology, September 2015, pages 5S-69S
  • Cossma, April 2015, pages 12-15
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Occlusive

13th on the list, which puts it at an estimated 1–3% of the formula.

2-Propenoic acid, 2-methyl-, methyl ester, homopolymer

Microplastic
14 Ptfe Texture agent
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent

14th on the list, which puts it at an estimated 1–3% of the formula.

Ethene, tetrafluoro-, homopolymer

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

15th on the list, which puts it at an estimated 1–3% of the formula.

2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]

Anti-Aging
16 Diglycerin Humectant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant

16th on the list, which puts it at an estimated 1–3% of the formula.

Oxybispropanediol

Hydration
17 Butylene Glycol Humectant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Texture agent, Solvent

17th on the list, which puts it at an estimated 1–3% of the formula.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration
5 scientific references
  • CosmeticsInfoorg, Accessed March 2021, ePublication
  • US Food and Drug Administration Code of Federal Regulations</em>, Accessed March 2021, ePublication
  • International Journal of Toxicology, May 2011, pages 5S-16S
  • Skin Research and Technology, November 2007, pages 417-24
  • Journal of the American College of Toxicology, September 1985, pages 223-248
18 Dimethicone Emollient
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Occlusive

18th on the list, which puts it at an estimated 1–3% of the formula.

Dimethicone

Hydration Silicone
7 scientific references
  • FDA Code of Federal Regulations, April 2020, ePublication
  • International Journal of Toxicology, May 2014, pages 65S-115S
  • The Journal of Clinical and Aesthetic Dermatology, May 2014, pages 36-44
  • Dermatologic Therapy, May 2012, pages 229-233
  • Clinics in Dermatology, May-June 2012, pages 345-348
  • International Journal of Cosmetic Science, January 2008, pages 19-33
  • Skin Research and Technology, May 2000, pages 77-80
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Active

19th on the list, which puts it at an estimated 1–3% of the formula.

Hyaluronic acid, sodium, salt

Hydration Anti-Aging Soothing
5 scientific references
  • Der Hautarzt; Zeitschrift fur Dermatologie, Venerologie, und Verwandte Gebiete, December 2017, pages 987-993
  • Journal of Cosmetic Dermatology, July 2014, pages 277-287
  • Journal of Clinical and Aesthetic Dermatology, October 2012, pages 20-23
  • DermatoEndocrinology, July-December 2012, pages 253-258
  • Journal of Drugs in Dermatology, September 2011, pages 990-1000
20 Asiaticoside Antioxidant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Antioxidant

20th on the list, which puts it at an estimated 1–3% of the formula.

Urs-12-en-28-oic acid, 2,3,23-trihydroxy-, O-6-deoxy-alpha-L-mannopyranosyl-(1->4)-O-beta-D-glucopyranosyl-(1->6)-beta-D-glucopyranosyl ester (2alpha, 3beta, 4alpha)-

Anti-Aging Soothing
21 Tocopheryl Acetate Antioxidant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Antioxidant

21st on the list, which puts it at an estimated 1–3% of the formula.

3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-yl acetate

Anti-Aging Soothing
8 scientific references
  • 5 Super Anti-Aging Antioxidants Your Skin Needs
  • How to Keep Your Neck & Chest Looking Young
  • Acne & Aging Skin
  • How to Diminish Uneven Skin Tone and Get Your Glow Back
  • What Are Peptides and What Do They Do for Skin?
  • The Truth About Firming Creams
  • Top 5 Reasons to Add Antioxidants to Your Skin Care Routine
  • Anti-Aging Superstars
22 Panthenol Active
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Active

22nd on the list, which puts it at an estimated 1–3% of the formula.

Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol

Hydration Soothing
7 scientific references
  • The Linus Pauling Institute, Oregon State University, Accessed April 2021, ePublication
  • International Journal of Cosmetic Science, December 2019, pages 534-547
  • Journal of Cosmetic Dermatology, January 2019, pages 346-354
  • Cosmetic Ingredient Review, March 2018, pages 1-51
  • The Journal of Dermatological Treatment, August 2017, pages 173-180
  • Journal of Cosmetic Science, August 2011, pages 361-370
  • American Journal of Clinical Dermatology, Volume 3, 2002, pages 427-433
23 Tripeptide-1 Occlusive
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Occlusive, Active, Peptide

23rd on the list, which puts it at an estimated 1–3% of the formula.

Tripeptide-1 is a synthetic peptide containing glycine, histidine, and lysine

Anti-Aging
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant

24th on the list, which puts it at an estimated 1–3% of the formula.

Sodium hydrogen N-(1-oxooctadecyl)-L-glutamate

Hydration
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant

25th on the list, which puts it at an estimated 1–3% of the formula.

L-Glutamic acid, N-coco acyl derivs., monosodium salts

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant

26th on the list, which puts it at an estimated 1–3% of the formula.

L-Glutamic acid, N-coco acyl derivs., disodium salts

27 Xanthan Gum Surfactant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Surfactant, Texture agent

27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Xanthan gum

28 Tocopherol Antioxidant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Antioxidant

28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E

Anti-Aging Evens Skin Tone Soothing
4 scientific references
  • Journal or Agricultural and Food Chemistry, June 2010, pages 7013-7020
  • Journal of Investigative Dermatology, November 2001, pages 1212-1217
  • Canadian Family Physician, July 2006, pages 855-856
  • Dermatologic Surgery, April 1999, pages 311-315
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Texture agent

29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Tetradecanoic acid, isopropyl ester

Hydration
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Occlusive

30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Ammonium butenoate, polymer with propenoic acid, butenoic acid, and/or alkyl propenoates

Synthetic polymer
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Occlusive, Texture agent

31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2-Propenoic acid, homopolymer, sodium salt

Oil Control Synthetic polymer
7 scientific references
  • International Food Research Journal, February 2021, pages 44 - 55
  • Journal of Nanoscience and Nanotechnology, March 2018, pages 1, 611-1, 614
  • Industrial & Engineering Chemistry Research, November 2014, pages 18, 346-18, 351
  • Journal of Applied Polymer Science, November 2001, pages 1, 515-1, 520
  • United States Patent, April 2000, ePublication
  • https://wwwsocochemcom/is-sodium-polyacrylate-safehtml
  • https://wwwcir-safetyorg/sites/default/files/acryco092018TARpdf
32 Chlorphenesin Preservative
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Preservative

32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Propanediol, 3-(4-chlorophenoxy)-

33 Sodium Chloride Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Sodium chloride

34 BHT Antioxidant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Antioxidant

34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2,6-Di-tert-butyl-p-cresol

35 Dextran Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Dextran

Hydration
1 scientific reference
  • Related Articles
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Triethyl citrate

Oil Control
37 O-cymen-5-ol Preservative
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Preservative

37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

4-Isopropyl-m-cresol

38 Benzyl Alcohol Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent, Solvent, Preservative, Fragrance / colour

38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Benzyl alcohol

Alcohol Allergen
39 Phenoxyethanol Preservative
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Preservative

39th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2-Phenoxyethanol

40 Mica Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent, Fragrance / colour

40th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Mica is a series of silicate minerals of varying chemical composition but with similar physical properties. Mica may have well-defined cleavage and split into very thin sheets.

41 CI 77499 Fragrance / colour
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Fragrance / colour

41st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Triiron tetraoxide

42 CI 77491 Fragrance / colour
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Fragrance / colour

42nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Diiron trioxide; Ferric oxide

43 CI 77492 Fragrance / colour
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Fragrance / colour

43rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Iron oxide

People also compare

Products in the same category that share this formula's distinguishing ingredients.

Lifting Tinted CC Cream

Payot

Shares 8 key ingredients with Tinted Anti-Redness CC Cream: Dicaprylyl Carbonate, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Ethylhexyl Triazone, Cetearyl Alcohol, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine

Mini Tinted Perfecting Cream

Payot

Shares 8 key ingredients with Tinted Anti-Redness CC Cream: Dicaprylyl Carbonate, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Ethylhexyl Triazone, Cetearyl Alcohol

Tinted Perfecting CC Cream

Payot

Shares 8 key ingredients with Tinted Anti-Redness CC Cream: Dicaprylyl Carbonate, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Ethylhexyl Triazone, Cetearyl Alcohol

Tinted Radiance CC Cream

Payot

Shares 7 key ingredients with Tinted Anti-Redness CC Cream: Dicaprylyl Carbonate, Dibutyl Adipate, Ethylhexyl Triazone, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine, Cetearyl Alcohol

Perfect Cover BB Cream SPF 42+ PA+++

Missha

Shares 5 key ingredients with Tinted Anti-Redness CC Cream: Ethylhexyl Methoxycinnamate, Butylene Glycol, Glycerin, Sodium Hyaluronate, Tripeptide-1

Frequently asked questions

What ingredients are in Tinted Anti-Redness CC Cream?

AQUA, ETHYLHEXYL METHOXYCINNAMATE, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE, ETHYLHEXYL SALICYLATE, ETHYLHEXYL TRIAZONE, DICAPRYLYL CARBONATE, CI 77891, CETEARYL ALCOHOL, CETEARYL GLUCOSIDE, DIBUTYL ADIPATE, GLYCERIN, ISOAMYL LAURATE, POLYMETHYL METHACRYLATE, PTFE, BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE, DIGLYCERIN, BUTYLENE GLYCOL, DIMETHICONE, SODIUM HYALURONATE, ASIATICOSIDE, TOCOPHERYL ACETATE, PANTHENOL, TRIPEPTIDE-1, SODIUM STEAROYL GLUTAMATE, SODIUM COCOYL GLUTAMATE, DISODIUM COCOYL GLUTAMATE, XANTHAN GUM, TOCOPHEROL, ISOPROPYL MYRISTATE, ACRYLATES/AMMONIUM METHACRYLATE COPOLYMER, SODIUM POLYACRYLATE, CHLORPHENESIN, SODIUM CHLORIDE, BHT, DEXTRAN, TRIETHYL CITRATE, O-CYMEN-5-OL, BENZYL ALCOHOL, PHENOXYETHANOL, MICA, CI 77499, CI 77491, CI 77492.

What are the active ingredients in Tinted Anti-Redness CC Cream?

SODIUM HYALURONATE, PANTHENOL, TRIPEPTIDE-1.

How do I use Tinted Anti-Redness CC Cream?

Morning, on a perfectly cleansed face, alone or after your usual day cream.

What skin types is Tinted Anti-Redness CC Cream good for?

Judged on how rich the formula reads from its ingredient list, it suits Balanced, Combination (oily), Oily skin best. It is the least natural fit for Dry, Combination (dry) skin.

Is Tinted Anti-Redness CC Cream good for sensitive skin?

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Is Tinted Anti-Redness CC Cream fungal acne safe?

2 ingredients could feed malassezia: Isoamyl Laurate, Isopropyl Myristate. That describes the yeast's food supply, not a prediction that they will cause a breakout.

Can I use Tinted Anti-Redness CC Cream while pregnant?

Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.

Is Tinted Anti-Redness CC Cream fragrance free?

No — it contains Benzyl Alcohol.

Does Tinted Anti-Redness CC Cream contain alcohol?

No. Reading the full ingredient list, this formula is no drying alcohol.

Is Tinted Anti-Redness CC Cream silicone free?

No — it contains Dimethicone.

Does Tinted Anti-Redness CC Cream contain essential oils?

No. Reading the full ingredient list, this formula is essential-oil-free.

Is Tinted Anti-Redness CC Cream paraben free?

Yes. Reading the full ingredient list, this formula is paraben-free.

What can I layer with Tinted Anti-Redness CC Cream?

It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.

When should I apply Tinted Anti-Redness CC Cream?

Use it in the morning, taken with food.

How many ingredients does Tinted Anti-Redness CC Cream have?

It lists 43 ingredients, of which 8 are recorded as actives.

Who makes Tinted Anti-Redness CC Cream?

Payot.

What UV filters are in Tinted Anti-Redness CC Cream?

It filters UV with Octinoxate (ethylhexyl methoxycinnamate), Uvinul A Plus (diethylamino hydroxybenzoyl hexyl benzoate), Octisalate (ethylhexyl salicylate), Uvinul T 150 (ethylhexyl triazone), Titanium Dioxide (titanium dioxide), Tinosorb S (bis-ethylhexyloxyphenol methoxyphenyl triazine).

Is Tinted Anti-Redness CC Cream broad spectrum?

Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.

Does Tinted Anti-Redness CC Cream leave a white cast?

It may leave a slight cast. The formula mixes mineral and organic filters, so any cast is usually lighter than a fully mineral sunscreen's.

Is Tinted Anti-Redness CC Cream reef safe?

It contains Octinoxate, which are named in the Hawaii and Key West reef legislation. Some destinations restrict sunscreens containing them.

Can I wear Tinted Anti-Redness CC Cream under makeup?

Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.

How often should I reapply Tinted Anti-Redness CC Cream?

Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.

Brand
Payot

Reviews

0 total

Log in to leave a review.

No reviews yet. Be the first to share your thoughts.