innisfree
Super Volcanic Pore Clay Mask
face wash-off mask
innisfree
face wash-off mask
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testExperience the Innisfree Super Volcanic Pore Clay Mask, a creamy, non-drying clay mask designed for deep pore purification and exfoliation. This mask works to remove impurities, excess sebum, and dead skin cells, improving your skin's texture without stripping it of moisture. Formulated with volcanic clusters made from volcanic ash, it effectively absorbs excess oil, while AHA (Lactic Acid) helps to exfoliate and minimize the appearance of pores. Suitable for use once or twice a week, this mask helps maintain clear and refreshed skin. Key ingredients include walnut shell powder and kaolin clay, providing a smooth and refined complexion.
Super Volcanic Pore Clay Mask is a lightweight wash-off mask from innisfree, a brand based in Korea. Its job is UV protection, with the rest of the formula working on hydration. The ingredient list runs to 40 ingredients, each broken down in full below.
By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Hydration is handled by Butylene Glycol, Glycerin and Trehalose, humectants that pull water into the upper layers of skin rather than sealing it there.
It is a mineral sunscreen, filtering with Titanium Dioxide. Between them those filters cover UVB and UVA II. They stop short of UVA I (340–400 nm), the deepest ageing wavelengths, so this is not a broad-spectrum filter system by the strictest reading. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.
Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Butylene Glycol, Glycerin, Trehalose and Menthoxypropanediol.
Oil control: Moderate. Ingredients that moderate sebum or absorb shine, and here that comes from Silica, Bentonite and Kaolin.
On richness alone it suits Balanced skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on barrier support, antioxidant protection, soothing and firmness signalling. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is fragrance-free, essential-oil-free, no drying alcohol, paraben-free, silicone-free and microplastic-free. Those claims come from the ingredient list itself, not from the packaging.
It can be used morning and evening. In a routine it goes after serums. Seal in your serums with it; in the morning, sunscreen still goes on top. It carries UV filters, so it belongs in your morning routine.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Regulates sebum production to reduce shine and greasiness
Brightens and balances complexion for a more uniform appearance
Helps unclog pores and reduce blackheads for clearer skin
Tightens and refines the look of enlarged pores
Calms redness, irritation, and inflammation for sensitive skin
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
Mineral filter system · does not reach UVA I
Strong UVB and short-UVA protection, but it stops before UVA I — a mineral formula leaning on titanium dioxide alone needs zinc oxide beside it for deep UVA.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
3rd on the list, which puts it at an estimated 5–20% of the formula.
Titanium dioxide (CI 77891)
4th on the list, which puts it at an estimated 2–10% of the formula.
Silicon dioxide
5th on the list, which puts it at an estimated 2–10% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
6th on the list, which puts it at an estimated 2–10% of the formula.
alpha-D-Glucopyranoside, alpha-D-glucopyranosyl
8th on the list, which puts it at an estimated 1–5% of the formula.
Decanoic acid, ester with 1,2,3-propanetriol octanoate; Glycerides, mixed decanoyl and octanoyl
10th on the list, which puts it at an estimated 1–5% of the formula.
Bentonite. A colloidal clay. Consists primarily of montmorillonite (CI 77004)
11th on the list, which puts it at an estimated 1–3% of the formula.
Naturally occurring substances, kaolin (CI 77004)
12th on the list, which puts it at an estimated 1–3% of the formula.
Stearic acid, monoester with glycerol
13th on the list, which puts it at an estimated 1–3% of the formula.
Alcohols, C16-18
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Stearic acid
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
Every filter in this formula is photostable
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Best kept to separate routines — one in the morning, one at night, or on alternate days.
Can be layered, but the combination raises the irritation risk. Go slowly.
Can be layered, but the combination raises the irritation risk. Go slowly.
Can be layered, but the combination raises the irritation risk. Go slowly.
Can be layered, but the combination raises the irritation risk. Go slowly.
Can be layered, but the combination raises the irritation risk. Go slowly.
This product is the "Moisturise" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 40 ingredients on the label.
Sets the thickness, spread and stability of the formula
Lifts oil and dirt, or holds oil and water together
Forms a film that slows water loss
Softens and smooths by filling gaps between skin cells
Loosens or dissolves dead surface cells
Draws water into the upper layers of skin
Dissolves and carries everything else
Sets the acidity the formula needs to work
Binds trace metals that would otherwise spoil the formula
Changes how skin behaves rather than how it feels
Neutralises free radicals from UV and pollution
Absorbs or scatters ultraviolet light
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
3rd on the list, which puts it at an estimated 5–20% of the formula.
Titanium dioxide (CI 77891)
4th on the list, which puts it at an estimated 2–10% of the formula.
Silicon dioxide
5th on the list, which puts it at an estimated 2–10% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
6th on the list, which puts it at an estimated 2–10% of the formula.
alpha-D-Glucopyranoside, alpha-D-glucopyranosyl
7th on the list, which puts it at an estimated 1–5% of the formula.
Volcanic Ash is an amorphous, inorganic silicate obtained from lava deposits
8th on the list, which puts it at an estimated 1–5% of the formula.
Decanoic acid, ester with 1,2,3-propanetriol octanoate; Glycerides, mixed decanoyl and octanoyl
9th on the list, which puts it at an estimated 1–5% of the formula.
Ethenol, homopolymer
10th on the list, which puts it at an estimated 1–5% of the formula.
Bentonite. A colloidal clay. Consists primarily of montmorillonite (CI 77004)
11th on the list, which puts it at an estimated 1–3% of the formula.
Naturally occurring substances, kaolin (CI 77004)
12th on the list, which puts it at an estimated 1–3% of the formula.
Stearic acid, monoester with glycerol
13th on the list, which puts it at an estimated 1–3% of the formula.
Alcohols, C16-18
14th on the list, which puts it at an estimated 1–3% of the formula.
2-Pyrrolidinone, 1-ethenyl-, homopolymer
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Poly(oxy-1,2-ethanediyl), .alpha.-(1-oxooctadecyl)-.omega.-hydroxy- (100 mol EO average molar ratio)
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sorbitan, monooctadecanoate, poly(oxy-1,2-ethanediyl) derivs.
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hexadecanoic acid
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Stearic acid
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Iron Powder is the element consisting of powdered metallic iron
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Oils, vegetable, hydrogenated
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Xanthan gum
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Juglans Regia Shell Powder is a powder of the ground shells of the Walnut, Juglans regia L., Juglandaceae
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sorbitan stearate
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Zea Mays Starch is a high-polymeric carbohydrate material usually derived from the peeled seeds of the Corn, Zea mays L., Gramineae
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Copolymer of acrylic acid, acrylamide, sodium acrylate, sodium acryloyldimethyltaurate monomers
27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sorbitan, monododecanoate, poly(oxy-1,2-ethanediyl) derivs.
28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
D-Mannitol
29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Microcrystalline Cellulose is the isolated, colloidal crystalline portion of cellulose fibers.
30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium metaphosphate
31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Propanoic acid, 2-hydroxy-
32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Lactid Acid/Glycolic Acid Copolymer is a copolymer of Lactic Acid and Glycolic Acid monomers
33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Homopolymer of 2-methyl-1 propene
34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3-[[5-methyl-2-(1-methylethyl)cyclohexyl]oxy]propane-1,2-diol
35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tetrasodium pyrophosphate
36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sorbitan, isooctadecanoate
38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Cellulose, 2-(2-hydroxy-3-(trimethylammonium)propoxy)ethyl ether, chloride; Cellulose, 2-hydroxyethyl 2-[2-hydroxy-3-(trimethylammonio)propoxy]ethyl 2-hydroxy-3-(trimethylammonio)propyl ether, chloride Cellulose, ether with alpha-[2-hydroxy-3-(trimethylammonio)propyl]-omega-hydroxypoly(oxy-1,2-ethanediyl), chloride
39th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Lecithins. The complex combination of diglycerides of fatty acids linked to the choline ester of phosphoric acid
40th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
Products in the same category that share this formula's distinguishing ingredients.
innisfree
Shares 12 key ingredients with Super Volcanic Pore Clay Mask: Butylene Glycol, Titanium Dioxide, Silica, Glycerin, Trehalose
Dr.Melaxin
Shares 9 key ingredients with Super Volcanic Pore Clay Mask: Water, Glycerin, Kaolin, Glyceryl Stearate, Bentonite
I Dew Care
Shares 9 key ingredients with Super Volcanic Pore Clay Mask: Glycerin, Caprylic/capric Triglyceride, Cetearyl Alcohol, Titanium Dioxide, Water
innisfree
Shares 9 key ingredients with Super Volcanic Pore Clay Mask: Kaolin, Butylene Glycol, Glycerin, Silica, Caprylic/capric Triglyceride
LAGOM
Shares 9 key ingredients with Super Volcanic Pore Clay Mask: Water, Kaolin, Glycerin, Caprylic/capric Triglyceride, Titanium Dioxide
Beauty of Joseon
Shares 8 key ingredients with Super Volcanic Pore Clay Mask: Water, Kaolin, Glycerin, Caprylic/capric Triglyceride, Glyceryl Stearate
WATER, BUTYLENE GLYCOL, TITANIUM DIOXIDE, SILICA, GLYCERIN, TREHALOSE, VOLCANIC ASH, CAPRYLIC/CAPRIC TRIGLYCERIDE, POLYVINYL ALCOHOL, BENTONITE, KAOLIN, GLYCERYL STEARATE, CETEARYL ALCOHOL, PVP, 1,2-HEXANEDIOL, PEG-100 STEARATE, POLYSORBATE 60, PALMITIC ACID, STEARIC ACID, IRON POWDER, HYDROGENATED VEGETABLE OIL, XANTHAN GUM, JUGLANS REGIA SHELL POWDER, SORBITAN STEARATE, ZEA MAYS STARCH, POLYACRYLATE-13, POLYSORBATE 20, MANNITOL, MICROCRYSTALLINE CELLULOSE, SODIUM METAPHOSPHATE, LACTIC ACID, LACTIC ACID/GLYCOLIC ACID COPOLYMER, POLYISOBUTENE, MENTHOXYPROPANEDIOL, TETRASODIUM PYROPHOSPHATE, ETHYLHEXYLGLYCERIN, SORBITAN ISOSTEARATE, POLYQUATERNIUM-10, LECITHIN, TOCOPHEROL.
LACTIC ACID.
After cleansing, gently apply onto dry face, avoiding the eye and lip area. Rinse off with lukewarm water after 5–10 minutes. Use 1–2 times a week.
Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry) skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
6 ingredients could feed malassezia: Glyceryl Stearate, Peg-100 Stearate, Polysorbate 60, Sorbitan Stearate, Polysorbate 20, Sorbitan Isostearate. That describes the yeast's food supply, not a prediction that they will cause a breakout.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
Yes. Reading the full ingredient list, this formula is fragrance-free.
No. Reading the full ingredient list, this formula is no drying alcohol.
Yes. Reading the full ingredient list, this formula is silicone-free.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Azelaic acid, Copper peptides, Bakuchiol, Niacinamide, Hyaluronic acid, Ceramides. Take more care combining it with Retinoids (retinol, retinal), Vitamin C (L-ascorbic acid), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide — use them in separate routines or on alternate days.
Use it morning and evening, after serums.
It lists 40 ingredients, of which 2 are recorded as actives.
innisfree, a brand based in Korea.
It filters UV with Titanium Dioxide (titanium dioxide).
Not in the strictest sense. Its filters stop short of UVA I (340–400 nm), the deepest ageing wavelengths.
Possibly. It filters with mineral UV filters, which sit on the surface and can leave a visible cast on deeper skin tones, especially at high SPF.
It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.
Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.
Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect