CeraVe
Hydrating Mineral Sunscreen SPF 50 Face Lotion
face sunscreen
CeraVe
face sunscreen
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testConcentrations
| TITANIUM DIOXIDE | 9% |
| ZINC OXIDE | 7% |
Protect your skin from the sun with a gentle, yet effective face lotion. CeraVe Hydrating Mineral Sunscreen Face Lotion with Broad Spectrum SPF 50 is a 100%-mineral, oil-free sunscreen with titanium dioxide and zinc oxide that forms a protective barrier on your skin’s surface to help reflect the sun’s UVA and UVB rays without irritating sensitive skin. Our formula has three essential ceramides to help restore the skin’s barrier and provide long-lasting hydration, as well as niacinamide to help calm your skin.
Hydrating Mineral Sunscreen SPF 50 Face Lotion is a cushioning sunscreen from CeraVe, a brand based in USA. It is rated SPF 50. Its job is UV protection, with the rest of the formula working on hydration and soothing. The ingredient list runs to 46 ingredients, each broken down in full below.
By its ingredient list the formula reads as moderately cushioned — emollient enough to feel like a cream, without the heaviest occlusives near the top. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Glycerin, Propanediol and Sodium Hyaluronate, humectants that pull water into the upper layers of skin rather than sealing it there.
It is a mineral sunscreen, filtering with Titanium Dioxide and Zinc Oxide. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.
Hydration: High. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Glycerin, Propanediol, Sodium Hyaluronate and Panthenol.
Soothing: High. Ingredients aimed at visible redness and reactivity, and here that comes from C12-15 Alkyl Benzoate, Panthenol, Zinc Oxide and Niacinamide.
Oil control: Moderate. Ingredients that moderate sebum or absorb shine, and here that comes from Zinc Oxide, Niacinamide and Aluminum Hydroxide.
Barrier support: Moderate. Lipids and repair signals that support skin barrier integrity, and here that comes from Niacinamide, Ceramide NP, Ceramide AP and Ceramide EOP.
On richness alone it suits Balanced skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on antioxidant protection, cell renewal and firmness signalling. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is fragrance-free, essential-oil-free, no drying alcohol, paraben-free, microplastic-free and sulfate-free. Those claims come from the ingredient list itself, not from the packaging.
Use it in the morning. In a routine it goes final morning step, before makeup. Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms. Reapply every two hours of sun exposure, and after swimming or towelling off. Let it set for a couple of minutes before makeup so it does not pill.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Calms redness, irritation, and inflammation for sensitive skin
Regulates sebum production to reduce shine and greasiness
Brightens and balances complexion for a more uniform appearance
Tightens and refines the look of enlarged pores
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
Mineral filter system · broad-spectrum through UVA I
Strong UVB and short-UVA protection, but it stops before UVA I — a mineral formula leaning on titanium dioxide alone needs zinc oxide beside it for deep UVA.
The only single filter that covers the whole UVB–UVA1 range on its own. Scatters and absorbs rather than purely absorbing, and can leave a white cast at high loads.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list. Regulation caps it at 25%, so it is present at roughly 10–25%.
Titanium dioxide (CI 77891)
2nd on the list, which puts it at an estimated 5–20% of the formula.
Zinc oxide (CI 77947)
3rd on the list, which puts it at an estimated 5–20% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
4th on the list, which puts it at an estimated 2–10% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
5th on the list, which puts it at an estimated 2–10% of the formula.
Benzoic acid, C12-15 alkyl esters
6th on the list, which puts it at an estimated 2–10% of the formula.
Dimethicone
9th on the list, which puts it at an estimated 1–5% of the formula.
Stearic acid, monoester with glycerol
10th on the list, which puts it at an estimated 1–5% of the formula.
Benzoic acid, 2-hydroxy-, 2-butyloctyl ester
11th on the list, which puts it at an estimated 1–3% of the formula.
Carbonic Acid, Dicaprylyl Ester
12th on the list, which puts it at an estimated 1–3% of the formula.
1,3-dihydroxypropane
13th on the list, which puts it at an estimated 1–3% of the formula.
Stearic acid
14th on the list, which puts it at an estimated 1–3% of the formula.
Aluminium hydroxide
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
Every filter in this formula is photostable
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Dimethicone, Dimethiconol
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.
This product is the "Protect" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 46 ingredients on the label.
Lifts oil and dirt, or holds oil and water together
Sets the thickness, spread and stability of the formula
Softens and smooths by filling gaps between skin cells
Changes how skin behaves rather than how it feels
Forms a film that slows water loss
Dissolves and carries everything else
Draws water into the upper layers of skin
Keeps the product free of microbial growth
Binds trace metals that would otherwise spoil the formula
Sets the acidity the formula needs to work
Absorbs or scatters ultraviolet light
Neutralises free radicals from UV and pollution
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list. Regulation caps it at 25%, so it is present at roughly 10–25%.
Titanium dioxide (CI 77891)
2nd on the list, which puts it at an estimated 5–20% of the formula.
Zinc oxide (CI 77947)
3rd on the list, which puts it at an estimated 5–20% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
4th on the list, which puts it at an estimated 2–10% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
5th on the list, which puts it at an estimated 2–10% of the formula.
Benzoic acid, C12-15 alkyl esters
6th on the list, which puts it at an estimated 2–10% of the formula.
Dimethicone
7th on the list, which puts it at an estimated 1–5% of the formula.
2,2,4,6,6-Pentamethylheptane; Hydrocarbons, C4, 1,3-butadiene-free, polymd., triisobutylene fraction, hydrogenated
8th on the list, which puts it at an estimated 1–5% of the formula.
Styrene/Acrylates Copolymer is a polymer of Styrene and a monomer consisting of Acrylic Acid, Methacrylic Acid or one of their simple esters.
9th on the list, which puts it at an estimated 1–5% of the formula.
Stearic acid, monoester with glycerol
10th on the list, which puts it at an estimated 1–5% of the formula.
Benzoic acid, 2-hydroxy-, 2-butyloctyl ester
11th on the list, which puts it at an estimated 1–3% of the formula.
Carbonic Acid, Dicaprylyl Ester
12th on the list, which puts it at an estimated 1–3% of the formula.
1,3-dihydroxypropane
13th on the list, which puts it at an estimated 1–3% of the formula.
Stearic acid
14th on the list, which puts it at an estimated 1–3% of the formula.
Aluminium hydroxide
15th on the list, which puts it at an estimated 1–3% of the formula.
Poly(oxy-1,2-ethanediyl), .alpha.-(1-oxooctadecyl)-.omega.-hydroxy- (100 mol EO average molar ratio)
16th on the list, which puts it at an estimated 1–3% of the formula.
Sorbitan stearate
17th on the list, which puts it at an estimated 1–3% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
18th on the list, which puts it at an estimated 1–3% of the formula.
Poly(oxy-1,2-ethanediyl), .alpha.-(1-oxododecyl)-.omega.-hydroxy- (8 mol EO average molar ratio)
19th on the list, which puts it at an estimated 1–3% of the formula.
Ceramide NP,1,3,4-Octadecanetriol, 2-Octadecanamide,Stearoyl-C18-Phytosphingosine,Stearoyl-4-Hydroxysphinganine
20th on the list, which puts it at an estimated 1–3% of the formula.
1,3,4-Octadecanetriol, 2-(2-Hydroxy) Stearamide
21st on the list, which puts it at an estimated 1–3% of the formula.
Ceramide EOP,1,3,4-Octadecanetriol, 2-Stearoyloxyheptacosamide,Stearoyloxyheptacosanoyl-C18-Phytosphingosine,Stearoyloxyheptacosanoyl-4-Hydroxysphinganine
22nd on the list, which puts it at an estimated 1–3% of the formula.
Sorbitan, isooctadecanoate
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Propenoic acid, polymer with 2,2-bis(hydroxymethyl)propane-1,3-diol 2-propenyl ether
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Alcohols, C16-18
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
C16-18 alcohols, ethoxylated (20 mol EO average molar ratio)
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Silane, triethoxyoctyl-
27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Poly[oxy(dimethylsilylane)], .alpha.-hydro-.omega.-hydroxy-
28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Trisodium citrate
29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium 2-(1-carboxylatoethoxy)-1-methyl-2-oxoethyl laurate
30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium dodecylbenzenesulphonate
31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tetradecanoic acid
32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid, sodium, salt
33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Cholest-5-en-3-ol (beta)-
34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hexadecanoic acid
35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Phenoxyethanol
36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(4-chlorophenoxy)-
37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,4-Dihydro-2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-2H-benzopyran-6-ol; .alpha.-tocopherol; Vitamin E
38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer is a copolymer of sodium hydroxyethyl acrylate and acryloyldimethyl taurate monomers
39th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octane-1,2-diol
40th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Hydroxy-1,2,3-propanetricarboxylic acid
41st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol
42nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Xanthan gum
43rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,3,4-Octadecanetriol, 2-amino-, (2S, 3S, 4R)-
44th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
12-Hydroxyoctadecanoic acid, homopolymer
45th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sorbitan, monooctadecanoate, poly(oxy-1,2-ethanediyl) derivs.
46th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
Products in the same category that share this formula's distinguishing ingredients.
CeraVe
Shares 17 key ingredients with Hydrating Mineral Sunscreen SPF 50 Face Lotion: Titanium Dioxide, Zinc Oxide, Water, Glycerin, C12-15 Alkyl Benzoate
CeraVe
Shares 14 key ingredients with Hydrating Mineral Sunscreen SPF 50 Face Lotion: Titanium Dioxide, Zinc Oxide, Water, Glycerin, Dicaprylyl Carbonate
CeraVe
Shares 13 key ingredients with Hydrating Mineral Sunscreen SPF 50 Face Lotion: Titanium Dioxide, Zinc Oxide, Water, C12-15 Alkyl Benzoate, Dicaprylyl Carbonate
CeraVe
Shares 13 key ingredients with Hydrating Mineral Sunscreen SPF 50 Face Lotion: Titanium Dioxide, Zinc Oxide, Water, C12-15 Alkyl Benzoate, Dicaprylyl Carbonate
CeraVe
Shares 13 key ingredients with Hydrating Mineral Sunscreen SPF 50 Face Lotion: Titanium Dioxide, Zinc Oxide, Water, C12-15 Alkyl Benzoate, Dicaprylyl Carbonate
CeraVe
Shares 11 key ingredients with Hydrating Mineral Sunscreen SPF 50 Face Lotion: Zinc Oxide, Water, Glycerin, Propanediol, Butyloctyl Salicylate
TITANIUM DIOXIDE, ZINC OXIDE, WATER, GLYCERIN, C12-15 ALKYL BENZOATE, DIMETHICONE, ISODODECANE, STYRENE/ACRYLATES COPOLYMER, GLYCERYL STEARATE, BUTYLOCTYL SALICYLATE, DICAPRYLYL CARBONATE, PROPANEDIOL, STEARIC ACID, ALUMINUM HYDROXIDE, PEG-100 STEARATE, SORBITAN STEARATE, NIACINAMIDE, PEG-8 LAURATE, CERAMIDE NP, CERAMIDE AP, CERAMIDE EOP, SORBITAN ISOSTEARATE, CARBOMER, CETEARYL ALCOHOL, CETEARETH-20, TRIETHOXYCAPRYLYLSILANE, DIMETHICONOL, SODIUM CITRATE, SODIUM LAUROYL LACTYLATE, SODIUM DODECYLBENZENESULFONATE, MYRISTIC ACID, SODIUM HYALURONATE, CHOLESTEROL, PALMITIC ACID, PHENOXYETHANOL, CHLORPHENESIN, TOCOPHEROL, HYDROXYETHYL ACRYLATE/SODIUM ACRYLOYLDIMETHYL TAURATE COPOLYMER, CAPRYLYL GLYCOL, CITRIC ACID, PANTHENOL, XANTHAN GUM, PHYTOSPHINGOSINE, POLYHYDROXYSTEARIC ACID, POLYSORBATE 60, ETHYLHEXYLGLYCERIN.
NIACINAMIDE, CERAMIDE NP, CERAMIDE AP, CERAMIDE EOP, SODIUM HYALURONATE, CITRIC ACID, PANTHENOL.
Apply CeraVe Sunscreen Face Lotion SPF 50 liberally 15 minutes before sun exposure. Reapply at least every 2 hours and immediately after towel drying.
Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry) skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
6 ingredients could feed malassezia: Glyceryl Stearate, Peg-100 Stearate, Sorbitan Stearate, Peg-8 Laurate, Sorbitan Isostearate, Polysorbate 60. That describes the yeast's food supply, not a prediction that they will cause a breakout.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
Yes. Reading the full ingredient list, this formula is fragrance-free.
No. Reading the full ingredient list, this formula is no drying alcohol.
No — it contains Dimethicone, Dimethiconol.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.
Use it in the morning, final morning step, before makeup.
It lists 46 ingredients, of which 9 are recorded as actives.
CeraVe, a brand based in USA.
It filters UV with Titanium Dioxide (titanium dioxide), Zinc Oxide (zinc oxide).
Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.
Possibly. It filters with mineral UV filters, which sit on the surface and can leave a visible cast on deeper skin tones, especially at high SPF.
It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.
Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.
Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect