JUMISO Niacinamide 3+ Tone-Up Sunscreen

JUMISO

Niacinamide 3+ Tone-Up Sunscreen

face sunscreen

Added Last edited

Fit by skin type

General, ingredient-based — not your personalized match.

Dry
59%
Combination (dry)
59%
Balanced
89%
Combination (oily)
81%
Oily
81%

See how this fits your skin

Take the skin test and I'll show you how suitable this product is for you.

Take the skin test
58
Ingredients
7
Benefits
1
Actives
Find Dupes

The JUMISO Niacinamide 3% + Tone-Up Sunscreen SPF 50+ PA++++ is a dual-purpose formula that provides high-level UV protection while doubling as a complexion-correcting base. Infused with 3% Niacinamide, this sunscreen works to brighten dullness, regulate sebum production, and fade the appearance of dark spots over time. Its unique "tone-up" property provides an immediate brightening effect, neutralizing sallowness and leaving a natural, radiant finish that mimics a "your skin but better" look. The lightweight, non-greasy texture adheres smoothly to the skin without a heavy white cast, making it an excellent primer for makeup or a stand-alone product for a refreshed, even-toned complexion.

Key Insights

Benefits

7
Anti-Aging
Dark Spot Fading
Evens Skin Tone
Hydration
Oil Control
Pore Minimizer
Soothing

Active Ingredients

1
Vitamin B3 (niacinamide)

Risks

3
Microplastic
Silicone
Sulfate

About Niacinamide 3+ Tone-Up Sunscreen

Overview

Niacinamide 3+ Tone-Up Sunscreen is a lightweight sunscreen from JUMISO. Its job is UV protection, with the rest of the formula working on hydration and soothing. The ingredient list runs to 58 ingredients, each broken down in full below.

Texture and finish

By its ingredient list the formula reads as light: water and humectants lead, with emollients kept lower in the order. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Propanediol, Glycerin and Ethylhexylglycerin, humectants that pull water into the upper layers of skin rather than sealing it there.

UV filter system

It uses a hybrid filter system — Uvinul T 150, Tinosorb S, Tinosorb M, Titanium Dioxide and Uvinul A Plus — combining mineral and organic filters. Between them those filters cover UVB, UVA II and UVA I, so the formula is broad-spectrum in the meaningful sense: it reaches past 340 nm, where the ageing wavelengths sit. Every filter in the formula is photostable, so its protection does not fall away over the first hour in the sun — reapplication is still about sweat, water and rubbing rather than degradation.

What the formula does

Hydration: Very high. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Propanediol, Glycerin, Ethylhexylglycerin and Butylene Glycol.

Soothing: High. Ingredients aimed at visible redness and reactivity, and here that comes from C12-15 Alkyl Benzoate, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Allantoin and Asiaticoside.

Oil control: Moderate. Ingredients that moderate sebum or absorb shine, and here that comes from Niacinamide, Silica and Aluminum Hydroxide.

Brightening: Moderate. Ingredients that act on uneven tone and post-inflammatory marks, and here that comes from Niacinamide, Tranexamic Acid and Hexylresorcinol.

Who it suits

On richness alone it suits Balanced skin best, and is the least natural fit for Dry and Combination (dry) skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.

What it does not target

The formula contributes little or nothing on cell renewal and firmness signalling. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.

What is not in it

Reading the full list, the formula is fragrance-free, essential-oil-free, no drying alcohol, paraben-free, sulfate-free and dye-free. Those claims come from the ingredient list itself, not from the packaging.

Where it fits in a routine

Use it in the morning. In a routine it goes final morning step, before makeup. Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms. Reapply every two hours of sun exposure, and after swimming or towelling off. Let it set for a couple of minutes before makeup so it does not pill.

This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.

Pros and cons

Drawn purely from the ingredient list

Pros

  • Broad-spectrum coverage that reaches into UVA I
  • Every UV filter in it is photostable
  • No fragrance or declared allergens
  • No essential oils
  • No drying alcohol
  • Strong humectant content for hydration
  • Several soothing ingredients
  • No common irritants flagged in the list

Things to know

  • Contains a solid synthetic polymer (microplastic)
  • 2 ingredients could feed malassezia (fungal acne)

Which skin types it suits

Scored on how rich or light the formula reads from its INCI order.

Suitable for

  • Balanced skin

May suit

  • Combination (oily) skin
  • Oily skin

Less suitable for

  • Dry skin
  • Combination (dry) skin

Sensitive skin

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Skin concerns

Based on the curated benefits documented for this product's ingredients.

Helps with

  • Anti-Aging 16 ingredients

    Boosts collagen and cell turnover to reduce fine lines and wrinkles

  • Hydration 15 ingredients

    Attracts and locks in moisture to keep skin plump and dewy

  • Soothing 8 ingredients

    Calms redness, irritation, and inflammation for sensitive skin

  • Dark Spot Fading 2 ingredients

    Fades hyperpigmentation and evens out dark spots over time

  • Oil Control 2 ingredients

    Regulates sebum production to reduce shine and greasiness

  • Evens Skin Tone 1 ingredient

    Brightens and balances complexion for a more uniform appearance

  • Pore Minimizer 1 ingredient

    Tightens and refines the look of enlarged pores

Does not target

Anti-Acne Blackhead Reducing Smooths Bumpy Skin

None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.

UV filters

Hybrid mineral and organic filter system · broad-spectrum through UVA I

Uvinul T 150

ethylhexyl triazone
Protects from
UVB (290–320 nm)
Photostable
Yes — photostable
Generation
Next-generation UVB filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 5% (EU)

The most efficient UVB absorber available by weight, which is why high-SPF formulas reach SPF 50+ without feeling heavy. Contributes nothing to UVA.

Tinosorb S

bis-ethylhexyloxyphenol methoxyphenyl triazine
Protects from
UVB (290–320 nm), UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation broad-spectrum filter
Approved in
EU, UK, Korea, Japan, Australia — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

One of the most photostable filters in use, and it stabilises avobenzone and octinoxate alongside it. Oil-soluble, cosmetically light, no white cast.

Tinosorb M

methylene bis-benzotriazolyl tetramethylbutylphenol
Protects from
UVB (290–320 nm), UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation hybrid filter
Approved in
EU, UK, Korea, Japan, Australia — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

A hybrid: it absorbs like an organic filter and scatters like a mineral one, because it is dispersed as microfine particles rather than dissolved.

Titanium Dioxide

titanium dioxide
Protects from
UVB (290–320 nm), UVA II (320–340 nm)
Photostable
Yes — photostable
Generation
Mineral (inorganic) filter
Approved in
Approved worldwide
Maximum permitted level
Up to 25% (EU, US, KR)

Strong UVB and short-UVA protection, but it stops before UVA I — a mineral formula leaning on titanium dioxide alone needs zinc oxide beside it for deep UVA.

Uvinul A Plus

diethylamino hydroxybenzoyl hexyl benzoate
Protects from
UVA II (320–340 nm), UVA I (340–400 nm)
Photostable
Yes — photostable
Generation
Next-generation UVA filter
Approved in
EU, UK, Korea, Japan — not FDA-approved in the US
Maximum permitted level
Up to 10% (EU)

A photostable replacement for avobenzone: it peaks at 354 nm, deep in UVA I, and does not need a stabiliser to survive the day.

Key ingredients

The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.

1st on the list, which puts it at an estimated 30–80% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration

2nd on the list, which puts it at an estimated 5–20% of the formula.

Benzoic acid, C12-15 alkyl esters

Hydration

3rd on the list, which puts it at an estimated 5–20% of the formula.

Diisopropyl sebacate

Hydration

4th on the list, which puts it at an estimated 2–10% of the formula.

1,3-dihydroxypropane

Hydration
Niacinamide Vitamin B3 (niacinamide)

5th on the list, which puts it at an estimated 2–10% of the formula.

Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**

Soothing Anti-Aging Pore Minimizer

6th on the list, which puts it at an estimated 2–10% of the formula.

Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane

Hydration Anti-Aging

7th on the list, which puts it at an estimated 1–5% of the formula.

Dibutyl adipate

Hydration

8th on the list, which puts it at an estimated 1–5% of the formula.

Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone

Anti-Aging

9th on the list, which puts it at an estimated 1–5% of the formula.

1,1,1,3,5,5,5-Heptamethyl-3-(trimethylsilyloxy)trisiloxane

Hydration

12th on the list, which puts it at an estimated 1–3% of the formula.

Silicon dioxide

Oil Control

Formula analysis

Each axis is scored from the ingredients present and how high up the list they sit.

Hydration Very high

Ingredients that pull and hold water in the upper layers of skin

Barrier support Moderate

Lipids and repair signals that support skin barrier integrity

Antioxidant support Low

Ingredients that mop up free radicals from UV and pollution

Oil control Moderate

Ingredients that moderate sebum or absorb shine

Brightening Moderate

Ingredients that act on uneven tone and post-inflammatory marks

Soothing High

Ingredients aimed at visible redness and reactivity

Cell renewal None

Retinoids, acids and enzymes that speed surface turnover

Firmness signalling None

Peptides and growth factors that signal for collagen support

Photostability Very high

Every filter in this formula is photostable

Active and supporting ingredients

"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.

Supporting ingredients (52)

Solvents, emollients, texture agents and preservatives — the formula that carries the actives.

Water C12-15 Alkyl Benzoate Diisopropyl Sebacate Propanediol Glycerin Dibutyl Adipate Methyl Trimethicone Silica Behenyl Alcohol Caprylic/capric Triglyceride Potassium Cetyl Phosphate Sorbitan Isostearate Ultramarines Ammonium Acryloyldimethyltaurate/vp Copolymer Poly C10-30 Alkyl Acrylate Polymethylsilsesquioxane 1,2-hexanediol Caprylyl Glycol Glyceryl Caprylate Decyl Glucoside Sodium Polyacryloyldimethyl Taurate Xanthan Gum Dimethicone/vinyl Dimethicone Crosspolymer Dimethicone Crosspolymer Ethylhexylglycerin Tromethamine Triethoxycaprylylsilane Aluminum Hydroxide Adenosine Disodium Edta Allantoin Glutathione Hexylresorcinol Tranexamic Acid Hamamelis Virginiana Water Ethoxydiglycol Butylene Glycol Octyldodecanol Asiaticoside Asiatic Acid Glycolipids Hydrogenated Lecithin Madecassic Acid Sodium/tea C12-13 Pareth-3 Sulfate Diospyros Kaki Leaf Extract Vitis Vinifera Fruit Extract Carthamus Tinctorius Flower Extract Coffea Arabica Seed Extract Polygonum Cuspidatum Root Extract Camellia Sinensis Leaf Extract Castanea Crenata Shell Extract Zanthoxylum Piperitum Fruit Extract

What is and is not in it

Read from the full ingredient list. A brand's own claim may differ.

Free from

  • Fragrance-free
  • Essential-oil-free
  • No drying alcohol
  • Paraben-free
  • Sulfate-free
  • Dye-free
  • Oil-free
  • No animal-derived ingredients

Contains

  • Silicones

    Methyl Trimethicone, Polymethylsilsesquioxane, Dimethicone/vinyl Dimethicone Crosspolymer, Dimethicone Crosspolymer

  • Microplastics

    Poly C10-30 Alkyl Acrylate, Polymethylsilsesquioxane

What to layer it with

Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.

Compatible with

  • Vitamin C (L-ascorbic acid)
  • Retinoids (retinol, retinal)
  • AHAs (glycolic, lactic)
  • BHA (salicylic acid)
  • PHAs (gluconolactone)
  • Benzoyl peroxide
  • Azelaic acid
  • Copper peptides
  • Bakuchiol
  • Niacinamide
  • Hyaluronic acid
  • Ceramides
  • Signal peptides
  • Panthenol
  • Sunscreen

Nothing in this formula belongs to a group our rules can put in conflict, so it layers freely. Order still matters — thinnest texture first.

Where it fits in a routine

Morning
  1. Cleanse
  2. Toning
  3. Treat
  4. Moisturise
  5. Protect

This product is the "Protect" step.

  • Apply about two finger-lengths for the face and neck — under-application is the single most common reason sunscreen underperforms.
  • Reapply every two hours of sun exposure, and after swimming or towelling off.
  • Let it set for a couple of minutes before makeup so it does not pill.

Safety and suitability

Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.

Pregnancy and breastfeeding
Nothing in this formula is on the standard pregnancy-caution list. That is not clearance — ask your doctor about anything you use daily.
Fungal acne (malassezia)
2 ingredients could feed malassezia: Sorbitan Isostearate, Glyceryl Caprylate. That is about the yeast's food supply, not a prediction that you will break out.
Sensitive and reactive skin
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Recorded ingredient risks
Microplastic, Silicone, Sulfate

Ingredients by function

Most ingredients do more than one job, so these counts add up to more than the 58 ingredients on the label.

17
Texture agent

Sets the thickness, spread and stability of the formula

10
Solvent

Dissolves and carries everything else

9
Emollient

Softens and smooths by filling gaps between skin cells

8
Plant extract

Botanical material, usually for antioxidants or scent

6
Occlusive

Forms a film that slows water loss

6
Surfactant

Lifts oil and dirt, or holds oil and water together

6
UV filter

Absorbs or scatters ultraviolet light

5
Humectant

Draws water into the upper layers of skin

3
Antioxidant

Neutralises free radicals from UV and pollution

3
Preservative

Keeps the product free of microbial growth

2
Soothing

Calms visible redness and irritation

1
Active

Changes how skin behaves rather than how it feels

1
Chelator

Binds trace metals that would otherwise spoil the formula

1
Exfoliant

Loosens or dissolves dead surface cells

1
pH adjuster

Sets the acidity the formula needs to work

Ingredient breakdown

Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.

1 Water Solvent
Estimated level
30–80%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

1st on the list, which puts it at an estimated 30–80% of the formula.

Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water

Hydration
3 scientific references
  • Skin Research and Technology, May 2015, pages 131-136
  • Skin Pharmacology and Applied Skin Physiology, November-December 1999, pages 344-351
  • Journal of Cosmetic Science, September-October 1993, pages 249-262
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Preservative

2nd on the list, which puts it at an estimated 5–20% of the formula.

Benzoic acid, C12-15 alkyl esters

Hydration
3 scientific references
  • The University of Toledo, May 2020, ePublication
  • Scientific Journal of the Faculty of Medicine in Nis, December 2013, pages 193-200
  • International Journal of Toxicology, November-December 2012, pages 342-372
Estimated level
5–20%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Solvent

3rd on the list, which puts it at an estimated 5–20% of the formula.

Diisopropyl sebacate

Hydration
8 scientific references
  • Supercharged Hydration
  • How Hyaluronic Acid Benefits Skin
  • What is Dehydrated Skin & How to Choose the Best Products
  • What Your Moisturizer Must Contain
  • Moisturizer Myths You Should Stop Believing Now
  • The Benefits of Glycerin in Skin Care
  • The Best Face Oils for Skin
  • How Facial Oils Help Skin
4 Propanediol Texture agent
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Texture agent, Solvent

4th on the list, which puts it at an estimated 2–10% of the formula.

1,3-dihydroxypropane

Hydration
4 scientific references
  • PubChem Compound Summary, April 2021, ePublication
  • SpecialChem, Accessed April 2021, ePublication
  • Cosmetic Ingredient Review, June 2018, pages 1-73
  • Cosmetics & Toiletries, May 2013, pages 81-86
5 Niacinamide Active
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Active

5th on the list, which puts it at an estimated 2–10% of the formula.

Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**

Soothing Anti-Aging Pore Minimizer
15 scientific references
  • International Journal of Dermatology, February 2021, pages 166-173
  • Biomolecules & Therapeutics, July 2019, pages 562-569
  • Experimental Dermatology, February 2019, pages 15-22
  • Dermatologic Therapy, September 2017, ePublication
  • Journal of Investigative Dermatology, May 2017, page S116
  • International Journal of Pharmaceutics, March 2017, pages 158-162
  • Facial Plastic Surgery Clinics of North America, May 2016, pages 145-152
  • Clinical, Cosmetic, and Investigational Dermatology, July 2015, pages 405-412
  • Skin Pharmacology and Physiology, June 2014, pages 311-315
  • International Journal of Pharmacy, January 2013, pages 192-201
  • Dermatoendrocrinology, July 2012, pages 308-319
  • International Journal of Toxicology, September 2005, pages 1-31
  • Dermatologic Surgery, July 2005, pages 860-865
  • International Journal of Cosmetic Science, October 2004, pages 231-238
  • Journal of Cosmetic Dermatology, April 2004, pages 88-93
6 Glycerin Humectant
Estimated level
2–10%
Confidence
Moderate — INCI order above the 1% line
Roles
Humectant, Occlusive, Texture agent, Solvent

6th on the list, which puts it at an estimated 2–10% of the formula.

Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane

Hydration Anti-Aging
6 scientific references
  • Journal of Pharmaceutical Investigation, March 2021, pages 223-231
  • International Journal of Toxicology, November/December 2019, Volume 38, Supplement 3, pages 6S-22S
  • International Journal of Cosmetic Science, August 2016, ePublication
  • British Journal of Dermatology, July 2008, pages 23-34
  • Journal of Cosmetic Dermatology, June 2007, pages 75-82
  • Proceedings of the National Academy of Sciences, June 2003, pages 7, 360-7, 365
7 Dibutyl Adipate Emollient
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Occlusive, Solvent

7th on the list, which puts it at an estimated 1–5% of the formula.

Dibutyl adipate

Hydration
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

8th on the list, which puts it at an estimated 1–5% of the formula.

Benzoic acid, 4,4',4''-(1,3,5-triazine-2,4,6-triyltriimino)tris-,tris(2-ethylhexyl) ester; octyl triazone

Anti-Aging
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
Solvent

9th on the list, which puts it at an estimated 1–5% of the formula.

1,1,1,3,5,5,5-Heptamethyl-3-(trimethylsilyloxy)trisiloxane

Hydration Silicone
8 scientific references
  • Supercharged Hydration
  • How Hyaluronic Acid Benefits Skin
  • What is Dehydrated Skin & How to Choose the Best Products
  • What Your Moisturizer Must Contain
  • Moisturizer Myths You Should Stop Believing Now
  • The Benefits of Glycerin in Skin Care
  • The Best Face Oils for Skin
  • How Facial Oils Help Skin
Estimated level
1–5%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

10th on the list, which puts it at an estimated 1–5% of the formula.

2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]

Anti-Aging
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

11th on the list, which puts it at an estimated 1–3% of the formula.

2,2'-Methylene-bis-(6-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyl)phenol)

Anti-Aging
8 scientific references
  • 5 Super Anti-Aging Antioxidants Your Skin Needs
  • How to Keep Your Neck & Chest Looking Young
  • Acne & Aging Skin
  • How to Diminish Uneven Skin Tone and Get Your Glow Back
  • What Are Peptides and What Do They Do for Skin?
  • The Truth About Firming Creams
  • Top 5 Reasons to Add Antioxidants to Your Skin Care Routine
  • Anti-Aging Superstars
12 Silica Exfoliant
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Exfoliant, Texture agent

12th on the list, which puts it at an estimated 1–3% of the formula.

Silicon dioxide

Oil Control
6 scientific references
  • Advances in Colloid and Interface Science, July 2021, page 10, 2437
  • Cosmetic Ingredient Review, October 2019, pages 1-34
  • Nanomedicine, August 2019, pages 2, 243-2, 267
  • Biological and Pharmaceutical Bulletin, 2016, pages 1, 201-1, 205
  • European Journal of Pharmaceutics and Biopharmaceutics, January 2015, pages 116-125
  • Cosmetics & Toiletries, April 2015, pages 36-45
13 Titanium Dioxide UV filter
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter, Texture agent

13th on the list, which puts it at an estimated 1–3% of the formula.

Titanium dioxide (CI 77891)

Anti-Aging
10 scientific references
  • Journal of Cosmetic Dermatology, February 2021, pages 532-537
  • Frontiers in Bioengineering and Biotechnology, June 2020
  • Journal of Nanoparticle Research, March 2020
  • Journal of the European Academy of Dermatology and Venereology, November 2019, pages 34-46
  • Photodermatology, Photoimmunology and Photomedicine, November 2019, pages 442-446
  • Journal of Cosmetic Science, September 2019, pages 223-234
  • Materials, July 2019, pages 1-24
  • Photodermatology, Photoimmunology, and Photomedicine, April 2011, pages 58-67
  • Skin Therapy Letter, July-August 2008, pages 5-7
  • Environmental and Health Perspectives, July 2008, pages 893
14 Behenyl Alcohol Emollient
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Emollient, Texture agent

14th on the list, which puts it at an estimated 1–3% of the formula.

Docosan-1-ol

Hydration
5 scientific references
  • International Journal of Cosmetic Science, April 2017, pages 206-216
  • International Journal of Toxicology, May 2014, pages 77-142
  • Expert Opinion on Pharmacotherapy, March 2010, Volume 11, pages 853-860
  • Journal of the American College of Toxicology, 1988, pages 1-55
  • CosmeticsInfoorg, ePublication
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
UV filter

15th on the list, which puts it at an estimated 1–3% of the formula.

Benzoic Acid, 2-[4-(Diethylamino)-2-Hydroxybenzoyl]-, Hexyl Ester

Anti-Aging
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line

16th on the list, which puts it at an estimated 1–3% of the formula.

Decanoic acid, ester with 1,2,3-propanetriol octanoate; Glycerides, mixed decanoyl and octanoyl

Hydration
5 scientific references
  • International Journal of Toxicology, September 2020, pages 34-35
  • Periodica Polytechnica Chemical Engineering, 2014, pages 43-48
  • International Journal of Toxicology, January 2003, pages 4-5
  • Food and Chemical Toxicology, January 2000, pages 79-98
  • Journal of the Society of Cosmetic Chemists, August 1985, pages 303-311
Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant

17th on the list, which puts it at an estimated 1–3% of the formula.

1-hexadecanol, phosphate, potassium salt

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line
Roles
Surfactant

18th on the list, which puts it at an estimated 1–3% of the formula.

Sorbitan, isooctadecanoate

Estimated level
1–3%
Confidence
Moderate — INCI order above the 1% line

19th on the list, which puts it at an estimated 1–3% of the formula.

Ultramarines (blue, green, pink, red and violet) are synthetic pigments composed of complex sodium aluminum sulfosilicates having a typical formula Na(AlSiO)S with proportions of each element varying with each colour. To identify the colorant allowed for use in the European Union (EU), the INCI Name CI 77007 must be used.

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Ammonium Acryloyldimethyltaurate/VP Copolymer is a copolymer of ammonium acryloyldimethyltaurate and vinylpyrrolidone monomers

Hydration
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Polymer of acrylic acid ester and C10-30 alcohol

Microplastic
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Polymer formed by hydrolysis and condensation of methyltrimethoxysilane

Microplastic
23 1,2-hexanediol Solvent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Solvent

23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

24 Caprylyl Glycol Emollient
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient

24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Octane-1,2-diol

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Surfactant

25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Octanoic acid, monoester with glycerol

Hydration
26 Decyl Glucoside Surfactant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Surfactant, Texture agent

26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

D-Glucoside, Decyl

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2,2-Dimethyl-2-(2'-propenamido)ethanesulfonic acid, sodium salt, homopolymer

28 Xanthan Gum Surfactant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Surfactant, Texture agent

28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Xanthan gum

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Dimethicone/Vinyl Dimethicone Crosspolymer is a crosslinked dimethyl siloxane polymer (silicone elastomer) that is formed by the reaction between Hydrogen Dimethicone or Bis-Hydrogen Dimethicone, and Vinyl Dimethicone or Bis-Vinyldimethicone.

Silicone
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Siloxanes and silicones, di-Me, crosspolymers with C3-20 alkyl groups

Silicone
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,2-Propanediol, 3-(2-ethylhexyloxy)

Hydration
5 scientific references
  • PLoS One, October 2016, ePublication
  • Contact Dermatitis, May 2016, pages 281-288
  • International Journal of Toxicology, September 2013, pages 5S-21S
  • Personal Care, 2008, pages 1-4
  • Cosmetic Science Technology, 2006, pages 1-11
32 Tromethamine pH adjuster
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
pH adjuster

32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

1,3-Propanediol, 2-amino-2-(hydroxymethyl)-

33 Triethoxycaprylylsilane Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent

33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Silane, triethoxyoctyl-

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Emollient, Occlusive, Texture agent

34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Aluminium hydroxide

Oil Control
8 scientific references
  • Oil-Absorbing Ingredients
  • Help for Oily Skin
  • Salicylic Acid for Skin
  • How BHA Exfoliants Work
  • Which BHA Exfoliant is Right for Me?
  • Niacinamide Benefits: What Does Niacinamide Do for Skin?
  • The Best Toners for Oily Skin
  • The Best Moisturizers for Oily, Acne-Prone Skin
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

6-Amino-9-beta-D-ribofuranosyl-9H-purine

Soothing
8 scientific references
  • PubChem, Accessed May 2021, ePublication
  • Cosmetic Ingredient Review, September 2020, pages 1-38
  • Experimental Dermatology, August 2014, pages 553-554
  • Journal of Investigative Dermatology, August 2011, pages 526-546
  • International Journal of Cosmetic Science, December 2006, pages 447-451
  • British Journal of Pharmacology, October 2008, issue 4, pages 475-486
  • PloS One, May 2008 (ePublication)
  • >International Journal of Cosmetic Science, August 2006, pages 447-451
36 Disodium Edta Texture agent
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Texture agent, Chelator

36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Disodium dihydrogen ethylenediaminetetraacetate

37 Allantoin Occlusive
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Occlusive, Soothing

37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Urea, (2,5-dioxo-4-imidazolidinyl)-

Soothing
8 scientific references
  • Chemistry Series, March 2020, pages 7-21
  • Molecules, June 2019, pages 1-33
  • European Journal of Pharmacology, February 2018, pages 68-78
  • Journal of the American Academy of Dermatology, June 2017, Volume 76, Issue 2, Supplement 1
  • Pharmacognosy Review, Volume 5, July-December 2011
  • International Journal of Toxicology, May 2010, Supplement, pages 84S-97S
  • Journal of Occupational Medicine and Toxicology, October 2008, ePublication
  • https://wwwaccessdatafdagov/scripts/cdrh/cfdocs/cfcfr/CFRSearchcfm?CFRPart=347&showFR=1
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Glycine, N-(N-L-.gamma.-glutamyl-L-cysteinyl)-

Anti-Aging
8 scientific references
  • Journal of Cosmetic Dermatology, June 2019, pages 728–737
  • Clinical Cosmetic and Investigative Dermatology, April 2017, pages 147-153 and October 2014, pages 267-274
  • Nutrients, August 2017, pages 1-27
  • DermatoEndocrinology, July 2012, pages 308-319
  • Journal of Agricultural and Food Chemistry, 2011, pages 3, 940-3, 949
  • The Dermatologist, October 2011, volume 19, issue 10
  • Journal of Dermatologic Science, May 2010, pages 85-90
  • Free Radical Biology and Medicine, October 1994, pages 333-349
39 Hexylresorcinol Preservative
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Preservative

39th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

4-Hexyl-1,3-benzenediol

Anti-Aging Dark Spot Fading Soothing
6 scientific references
  • International Journal of Cosmetic Science, February 2022, pages 103–117
  • Journal of Cosmetic Dermatology, December 2020, pages 3, 280–3, 285
  • Journal of Biomolecular Research and Therapeutics, December 2018, pages 1–3
  • Journal of Drugs in Dermatology, July 2016, pages 863–868
  • Journal of Agricultural and Food Chemistry, August 2015, pages 7, 032–7, 040
  • Journal of the American Academy of Dermatology, February 2011, page AB22
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

40th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Cyclohexanecarboxylic acid, 4-(aminomethyl)-, trans-

Dark Spot Fading Evens Skin Tone Anti-Aging
8 scientific references
  • Journal of Cosmetic Dermatology, February 2021, pages 561-565
  • International Journal of Medical Sciences, March 2020, pages 903-911
  • Journal of Cosmetic Dermatology, April 2019, pages 563-567
  • Journal of Cutaneous and Aesthetic Surgery, January-March 2019, pages 63-67; and July-August 2013, pages 139-143
  • BioMed Research International, November 2018, ePublication
  • Dermatologic Surgery, June 2018, pages 814-825
  • Dermatology and Therapy, September 2017, pages 417-424
  • Journal of Research in Medical Sciences, August 2014, pages 753-757
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Soothing

41st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Hamamelis Virginiana Water is an aqueous solution containing natural volatile oils obtained by the distillation of twigs, bark and leaves of of the Witch Hazel, Hamamelis virginiana L., Hamamelidaceae

42 Ethoxydiglycol Humectant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Solvent

42nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2-(2-Ethoxyethoxy)ethanol; Carbitol; Diethylene glycol monoethyl ether; DEGEE

43 Butylene Glycol Humectant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Humectant, Texture agent, Solvent

43rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)

Hydration
5 scientific references
  • CosmeticsInfoorg, Accessed March 2021, ePublication
  • US Food and Drug Administration Code of Federal Regulations</em>, Accessed March 2021, ePublication
  • International Journal of Toxicology, May 2011, pages 5S-16S
  • Skin Research and Technology, November 2007, pages 417-24
  • Journal of the American College of Toxicology, September 1985, pages 223-248
44 Octyldodecanol Emollient
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Emollient, Solvent

44th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

2-Octyldodecan-1-ol

Hydration
45 Asiaticoside Antioxidant
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Antioxidant

45th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Urs-12-en-28-oic acid, 2,3,23-trihydroxy-, O-6-deoxy-alpha-L-mannopyranosyl-(1->4)-O-beta-D-glucopyranosyl-(1->6)-beta-D-glucopyranosyl ester (2alpha, 3beta, 4alpha)-

Anti-Aging Soothing
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

46th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

(2.alpha.,3.beta.,4.alpha.)-2,3,23-Trihydroxyurs-12-en-28-oic acid

Anti-Aging
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

47th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Glycolipids are mixed substances which contain carbohydrates covalently attached to a lipid

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Surfactant

48th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Lecithins, hydrogenated

Hydration
4 scientific references
  • International Journal of Toxicology, September 2020, pages 5S-25S
  • Nanocosmetics, June 2019, pages 95–140
  • Current Drug Delivery, 2016, pages 111–120
  • Pharmaceutical Research, February 2013, pages 538–55
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

49th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Urs-12-en-28-oic acid, 2,3,6,23-tetrahydroxy-, (2alpha,3beta,4alpha,6beta)-

Anti-Aging Soothing
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line

50th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Mixture of sodium and triethanolamine salts of the sulfate ester of C12-13 Pareth-3

Sulfate
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Occlusive, Plant extract

51st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Diospyros Kaki Leaf Extract is an extract of the leaves of the Kaki, Diospyros kaki L., Ebenaceae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

52nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Vitis Vinifera Extract is an extract of the fruit of the Grape, Vitis Vinifera L., Vitaceae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

53rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Carthamus Tinctorius Flower Extract is an extract of the flowers of the Safflower, Carthamus tinctorius L., Compositae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

54th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Coffea Arabica Seed Extract is an extract of the beans of the Coffee plant, Coffea arabica L., Rubiaceae

Anti-Aging
1 scientific reference
  • Related Articles
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Antioxidant, Plant extract

55th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Polygonum Cuspidatum Root Extract is an extract of the roots of the Japanese Knotweed, Polygonum cuspidatum, Polygonaceae

Anti-Aging Soothing
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
UV filter, Humectant, Emollient, Occlusive, Antioxidant, Plant extract, Preservative

56th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Camellia Sinensis Leaf Extract is an extract of the leaves of the Tea, Camellia sinensis, Theaceae

Anti-Aging Soothing
Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

57th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Castanea Crenata Shell Extract is an extract of the shell of the chestnut, Castanea crenata, Fagaceae

Estimated level
under 1%
Confidence
Moderate — listed below the 1% line
Roles
Plant extract

58th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.

Zanthoxylum Piperitum Extract is an extract of the fruit of the Prickly Ash, Zanthoxylum piperitum, Rutaceae

People also compare

Products in the same category that share this formula's distinguishing ingredients.

Anthelios Anti Dark-Spot Fluid SPF50+

La Roche-Posay

Shares 9 key ingredients with Niacinamide 3+ Tone-Up Sunscreen: Water, Silica, Diisopropyl Sebacate, Ethylhexyl Triazone, Bis-ethylhexyloxyphenol Methoxyphenyl Triazine

Frequently asked questions

What ingredients are in Niacinamide 3+ Tone-Up Sunscreen?

WATER, C12-15 ALKYL BENZOATE, DIISOPROPYL SEBACATE, PROPANEDIOL, NIACINAMIDE, GLYCERIN, DIBUTYL ADIPATE, ETHYLHEXYL TRIAZONE, METHYL TRIMETHICONE, BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE, METHYLENE BIS-BENZOTRIAZOLYL TETRAMETHYLBUTYLPHENOL, SILICA, TITANIUM DIOXIDE, BEHENYL ALCOHOL, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE, CAPRYLIC/CAPRIC TRIGLYCERIDE, POTASSIUM CETYL PHOSPHATE, SORBITAN ISOSTEARATE, ULTRAMARINES, AMMONIUM ACRYLOYLDIMETHYLTAURATE/VP COPOLYMER, POLY C10-30 ALKYL ACRYLATE, POLYMETHYLSILSESQUIOXANE, 1,2-HEXANEDIOL, CAPRYLYL GLYCOL, GLYCERYL CAPRYLATE, DECYL GLUCOSIDE, SODIUM POLYACRYLOYLDIMETHYL TAURATE, XANTHAN GUM, DIMETHICONE/VINYL DIMETHICONE CROSSPOLYMER, DIMETHICONE CROSSPOLYMER, ETHYLHEXYLGLYCERIN, TROMETHAMINE, TRIETHOXYCAPRYLYLSILANE, ALUMINUM HYDROXIDE, ADENOSINE, DISODIUM EDTA, ALLANTOIN, GLUTATHIONE, HEXYLRESORCINOL, TRANEXAMIC ACID, HAMAMELIS VIRGINIANA WATER, ETHOXYDIGLYCOL, BUTYLENE GLYCOL, OCTYLDODECANOL, ASIATICOSIDE, ASIATIC ACID, GLYCOLIPIDS, HYDROGENATED LECITHIN, MADECASSIC ACID, SODIUM/TEA C12-13 PARETH-3 SULFATE, DIOSPYROS KAKI LEAF EXTRACT, VITIS VINIFERA FRUIT EXTRACT, CARTHAMUS TINCTORIUS FLOWER EXTRACT, COFFEA ARABICA SEED EXTRACT, POLYGONUM CUSPIDATUM ROOT EXTRACT, CAMELLIA SINENSIS LEAF EXTRACT, CASTANEA CRENATA SHELL EXTRACT, ZANTHOXYLUM PIPERITUM FRUIT EXTRACT.

What are the active ingredients in Niacinamide 3+ Tone-Up Sunscreen?

NIACINAMIDE.

How do I use Niacinamide 3+ Tone-Up Sunscreen?

At the last stage of skin care, apply a suitable amount onto the face and gently tap it. Reapply every two hours for optimum sun protection.

What skin types is Niacinamide 3+ Tone-Up Sunscreen good for?

Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry) skin.

Is Niacinamide 3+ Tone-Up Sunscreen good for sensitive skin?

No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.

Is Niacinamide 3+ Tone-Up Sunscreen fungal acne safe?

2 ingredients could feed malassezia: Sorbitan Isostearate, Glyceryl Caprylate. That describes the yeast's food supply, not a prediction that they will cause a breakout.

Can I use Niacinamide 3+ Tone-Up Sunscreen while pregnant?

Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.

Is Niacinamide 3+ Tone-Up Sunscreen fragrance free?

Yes. Reading the full ingredient list, this formula is fragrance-free.

Does Niacinamide 3+ Tone-Up Sunscreen contain alcohol?

No. Reading the full ingredient list, this formula is no drying alcohol.

Is Niacinamide 3+ Tone-Up Sunscreen silicone free?

No — it contains Methyl Trimethicone, Polymethylsilsesquioxane, Dimethicone/vinyl Dimethicone Crosspolymer, Dimethicone Crosspolymer.

Does Niacinamide 3+ Tone-Up Sunscreen contain essential oils?

No. Reading the full ingredient list, this formula is essential-oil-free.

Is Niacinamide 3+ Tone-Up Sunscreen paraben free?

Yes. Reading the full ingredient list, this formula is paraben-free.

What can I layer with Niacinamide 3+ Tone-Up Sunscreen?

It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Benzoyl peroxide.

When should I apply Niacinamide 3+ Tone-Up Sunscreen?

Use it in the morning, final morning step, before makeup.

How many ingredients does Niacinamide 3+ Tone-Up Sunscreen have?

It lists 58 ingredients, of which 6 are recorded as actives.

Who makes Niacinamide 3+ Tone-Up Sunscreen?

JUMISO.

What UV filters are in Niacinamide 3+ Tone-Up Sunscreen?

It filters UV with Uvinul T 150 (ethylhexyl triazone), Tinosorb S (bis-ethylhexyloxyphenol methoxyphenyl triazine), Tinosorb M (methylene bis-benzotriazolyl tetramethylbutylphenol), Titanium Dioxide (titanium dioxide), Uvinul A Plus (diethylamino hydroxybenzoyl hexyl benzoate).

Is Niacinamide 3+ Tone-Up Sunscreen broad spectrum?

Yes. Its filters cover UVB, UVA II and UVA I, so protection reaches past 340 nm into the deep-UVA range associated with ageing and pigmentation.

Does Niacinamide 3+ Tone-Up Sunscreen leave a white cast?

It may leave a slight cast. The formula mixes mineral and organic filters, so any cast is usually lighter than a fully mineral sunscreen's.

Is Niacinamide 3+ Tone-Up Sunscreen reef safe?

It contains none of the filters named in the Hawaii and Key West reef legislation (oxybenzone and octinoxate). "Reef safe" is not a regulated term, so treat that as a fact about the filter list rather than a certification.

Can I wear Niacinamide 3+ Tone-Up Sunscreen under makeup?

Yes. Let it set for a couple of minutes before foundation so it does not pill, and reapply over makeup with a stick or powder rather than rubbing more in.

How often should I reapply Niacinamide 3+ Tone-Up Sunscreen?

Every two hours of sun exposure, and immediately after swimming, sweating heavily or towelling off.

Brand
JUMISO

Reviews

0 total

Log in to leave a review.

No reviews yet. Be the first to share your thoughts.