1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
Centellian24
Lifting Peptide Serum
face serum
Centellian24
face serum
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testThe Centellian24 Lifting Peptide Serum is a firming treatment designed to improve skin elasticity, smooth fine lines, and promote a more lifted, youthful appearance. Formulated with a peptide complex, this lightweight serum helps support collagen production while strengthening the skin barrier. Its fast-absorbing texture delivers deep hydration and nourishment without heaviness, leaving the skin feeling smooth and refreshed.
Lifting Peptide Serum is a cushioning serum from Centellian24. The formula is built mainly around hydration, firmness signalling and soothing. The ingredient list runs to 110 ingredients, each broken down in full below.
By its ingredient list the formula reads as moderately cushioned — emollient enough to feel like a cream, without the heaviest occlusives near the top. Silicones in the formula tend to give a smooth, blurred finish and help it grip under makeup. Hydration is handled by Glycerin, Butylene Glycol and Beta-glucan, humectants that pull water into the upper layers of skin rather than sealing it there.
Hydration: Very high. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Glycerin, Butylene Glycol, Beta-glucan and Hydrolyzed Hyaluronic Acid.
Firmness signalling: High. Peptides and growth factors that signal for collagen support, and here that comes from Adenosine, Ascorbic Acid Polypeptide, Palmitoyl Pentapeptide-4 and Acetyl Hexapeptide-8.
Soothing: High. Ingredients aimed at visible redness and reactivity, and here that comes from Cetyl Ethylhexanoate, Centella Asiatica Extract, Beta-glucan and Sodium Benzoate.
Barrier support: Moderate. Lipids and repair signals that support skin barrier integrity, and here that comes from Niacinamide, Butyrospermum Parkii, Hydrogenated Lecithin and Ceramide NP.
On richness alone it suits Balanced skin best, and is the least natural fit for Dry, Combination (dry), Combination (oily) and Oily skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on cell renewal. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is essential-oil-free, paraben-free, sulfate-free, dye-free, oil-free and no animal-derived ingredients. Those claims come from the ingredient list itself, not from the packaging. It does contain fragrance and drying alcohol, worth knowing if your skin reacts to any of them.
It can be used morning and evening. In a routine it goes after toner, before moisturiser. Apply to clean, dry skin and give it a minute to absorb before the next layer. Introduce one new treatment at a time so you can identify what is working.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Attracts and locks in moisture to keep skin plump and dewy
Calms redness, irritation, and inflammation for sensitive skin
Brightens and balances complexion for a more uniform appearance
Fades hyperpigmentation and evens out dark spots over time
Tightens and refines the look of enlarged pores
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
5th on the list, which puts it at an estimated 2–10% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
6th on the list, which puts it at an estimated 2–10% of the formula.
1,1,1,3,5,5,5-Heptamethyl-3-(trimethylsilyloxy)trisiloxane
7th on the list, which puts it at an estimated 1–5% of the formula.
Hexadecyl 2-ethylhexanoate
8th on the list, which puts it at an estimated 1–5% of the formula.
Bifida Ferment Lysate is a lysate of the product obtained by the fermentation of Bifida
9th on the list, which puts it at an estimated 1–5% of the formula.
1,2,3-Propanetriol, homopolymer, octadecanoates (1:1) (10 mol glycerol average molar ratio)
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,2-bis(Hydroxymethyl)propane-1,3-diyl distearate
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ethanone, 1-(4-hydroxyphenyl)-,p-Hydroxyacetophenone
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ammonium Acryloyldimethyltaurate/VP Copolymer is a copolymer of ammonium acryloyldimethyltaurate and vinylpyrrolidone monomers
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium hydrogen N-(1-oxooctadecyl)-L-glutamate
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Parfum
Alcohol
Polymethylsilsesquioxane, Methyl Trimethicone
Polymethylsilsesquioxane
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Best kept to separate routines — one in the morning, one at night, or on alternate days.
Best kept to separate routines — one in the morning, one at night, or on alternate days.
Can be layered, but the combination raises the irritation risk. Go slowly.
Can be layered, but the combination raises the irritation risk. Go slowly.
Can be layered, but the combination raises the irritation risk. Go slowly.
Can be layered, but the combination raises the irritation risk. Go slowly.
This product is the "Treat" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 110 ingredients on the label.
Amino-acid chains that signal for repair or firmness
Changes how skin behaves rather than how it feels
Sets the thickness, spread and stability of the formula
Draws water into the upper layers of skin
Botanical material, usually for antioxidants or scent
Lifts oil and dirt, or holds oil and water together
Forms a film that slows water loss
Dissolves and carries everything else
Neutralises free radicals from UV and pollution
Softens and smooths by filling gaps between skin cells
Keeps the product free of microbial growth
Sets the acidity the formula needs to work
Changes how the product smells or looks
Calms visible redness and irritation
Binds trace metals that would otherwise spoil the formula
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
3rd on the list, which puts it at an estimated 5–20% of the formula.
1,1'-Oxydipropan-2-ol; Oxydipropan-2-ol; Hydroxypropyloxypropanol
4th on the list, which puts it at an estimated 2–10% of the formula.
Polymer formed by hydrolysis and condensation of methyltrimethoxysilane
5th on the list, which puts it at an estimated 2–10% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
6th on the list, which puts it at an estimated 2–10% of the formula.
1,1,1,3,5,5,5-Heptamethyl-3-(trimethylsilyloxy)trisiloxane
7th on the list, which puts it at an estimated 1–5% of the formula.
Hexadecyl 2-ethylhexanoate
8th on the list, which puts it at an estimated 1–5% of the formula.
Bifida Ferment Lysate is a lysate of the product obtained by the fermentation of Bifida
9th on the list, which puts it at an estimated 1–5% of the formula.
1,2,3-Propanetriol, homopolymer, octadecanoates (1:1) (10 mol glycerol average molar ratio)
10th on the list, which puts it at an estimated 1–5% of the formula.
Methyl-D-glucopyranoside, ethers with 1,2,3-propanetriol homopolymer, octadecanoates (1:1:2) (3 mol glycerol average molar ratio)
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
C6-14-alkenes, homopolymers, hydrogenated
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,2-bis(Hydroxymethyl)propane-1,3-diyl distearate
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Naturally occurring substances, soluble collagen
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ethanone, 1-(4-hydroxyphenyl)-,p-Hydroxyacetophenone
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ammonium Acryloyldimethyltaurate/VP Copolymer is a copolymer of ammonium acryloyldimethyltaurate and vinylpyrrolidone monomers
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium hydrogen N-(1-oxooctadecyl)-L-glutamate
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Camellia Sinensis Leaf Water is an aqueous solution of the odoriferous principles of the leaves of the Tea, Camellia sinensis, Theaceae
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
C10-30 alkyl propenoate, polymer with propenoic acid, butenoic acidand/or alkyl propenoates, product with propenyl sucrose ether or propenyl 2,2-dihydroxymethyl-1,3-propanediol
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Eclipta Prostrata Leaf Extract is an extract of the leaves of Eclipta prostrata L., Compositae
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Laminaria Japonica Extract is an extract of the Japan Kelp/Seaweed, Laminaria japonica, Laminariaceae
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,3-Propanediol, 2-amino-2-(hydroxymethyl)-
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Xanthan gum
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Parfum is a term for ingredient labelling used to identify that a product contains a material or a combination of materials normally added to a cosmetic to produce or to mask a particular odour. According to Article 19 of the Cosmetics Regulation, 'Perfume and aromatic compositions and their raw materials shall be referred to by the terms ‘parfum’ or ‘aroma’. '
27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Lecithins, hydrogenated
28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Propenoic acid, 2-methyl-, homopolymer, ester with 1,2,3-propanetriol
29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
6-Amino-9-beta-D-ribofuranosyl-9H-purine
30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Fructooligosaccharides are oligosaccharides produced enzymatically from sugar beets and consist chiefly of kestose, nystose and fructosyl nystose
31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Centella Asiatica Extract is the extract of the whole plant Hydrocotyl, Centella asiatica L., Apiaceae
32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ficus Carica Fruit Extract is an extract of the fruit of the Fig, Ficus carica L., Moraceae
33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Disodium dihydrogen ethylenediaminetetraacetate
34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Melia Azadirachta Leaf Extract is an extract of the leaves of the Neem Tree, Melia azadirachta L., Meliaceae
35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Propenoic acid, polymer with 2,2-bis(hydroxymethyl)propane-1,3-diol 2-propenyl ether
36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
beta-Glucan is a polysaccharide consisting of b(1-3) linked glucose chains carrying b(1-6) linked glucose sidechains
37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Melia Azadirachta Flower Extract is an extract of the flowers of the Neem Tree, Melia Azadirachta L., Meliaceae
38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Curcuma Longa Root Extract is an extract of the rhizomes of the Turmeric, Curcuma longa L., Zingiberaceae
39th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Hyaluronic Acid is the hydrolysate of Hyaluronic Acid derived by acid, enzyme or other method of hydrolysis
40th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ceramide NP,1,3,4-Octadecanetriol, 2-Octadecanamide,Stearoyl-C18-Phytosphingosine,Stearoyl-4-Hydroxysphinganine
41st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Elastin is the hydrolysate of elastin derived by acid, enzyme or other method of hydrolysis
42nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ocimum Sanctum Leaf Extract is an extract of the leaves of Ocimum sanctum, Labiatae
43rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetic acid
44th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hyaluronic acid
45th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Elastins. An insoluble protein extracted from mammalian organisms
46th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Propanoic acid, 2-hydroxy-
47th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
L-Ascorbic acid, reaction products with protein hydrolyzates
48th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Cyanocobalamin; Vitamine B12
49th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Corallina Officinalis Extract is an extract of the Alga, Corallina officinalis L., Corallinaceae
50th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octane-1,2-diol
51st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Lysine, synthetic pentapeptide with serine, and threonine, hexadecanoyl derivatives
52nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ethanol
53rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Castor oil (Ricinus communis), hydrogenated, ethoxylated (40 mol EO average molar ratio)
54th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Lupine Protein is the hydrolysate of lupine protein derived by acid, enzyme or other method of hydrolysis
55th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Oxirane, methyl-, polymer with oxirane, monobutyl ether
56th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Potassium (E,E)-hexa-2,4-dienoate
57th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Protein hydrolyzates, wheat germ. Substance obtained by acidic, alkaline, or enzymatic hydrolysis of wheat germ composed primarily of amino acids, peptides, and proteins. It may contain impurities consisting chiefly of carbohydrates and lipids along with smaller quantities of miscellaneous organic substances of biological origin
58th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2,3-Propanetriol, homopolymer, dodecanoates (1:1) (10 mol glycerol average molar ratio)
59th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl hexapeptide-8 is the synthetic peptide consisting of arginine, methionine, and acetylated glutamic acid residues
60th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Protein hydrolyzates, rice. Substance obtained by acidic, alkaline, or enzymatic hydrolysis of rice composed primarily of amino acids, peptides, and proteins
61st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Copper Tripeptide-1 is a copper complex of Tripeptide-1
62nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tripeptide-1 is a synthetic peptide containing glycine, histidine, and lysine
63rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Protein hydrolyzates, corn. Substance obtained by acidic, alkaline, or enzymatic hydrolysis of Zea mays composed primarily of amino acids, peptides, and proteins. It may contain impurities consisting chiefly of carbohydrates and lipids along with smaller quantities of miscellaneous organic substances of biological origin.
64th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Protein hydrolyzates, soya. Substance obtained by acidic, alkaline, or enzymatic hydrolysis of soya composed primarily of amino acids, peptides, and proteins. It may contain impurities consisting chiefly of carbohydrates and lipids along with smaller quantities of miscellaneous organic substances of biological origin
65th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hexapeptide-9 is a synthetic peptide containing Glutamine, Glycine and Proline residues
66th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Palmitoyl Tetrapeptide-7 is the reaction product of palmitic acid and Tetrapeptide-7
67th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
L-Lysine, N-(1-oxohexadecyl)glycyl-L-histidyl-
68th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Nonapeptide-1 is a synthetic nonapeptide derived from arginine, lysine, methionine, phenylalanine, proline, tryptophan and valine
69th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Lecithins. The complex combination of diglycerides of fatty acids linked to the choline ester of phosphoric acid
70th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Tetrapeptide-11 is the reaction product of Acetic Acid and Tetrapeptide-11
71st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Phenoxyethanol
72nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tripeptide-29 is the synthetic peptide consisting of glycine, proline and hydroxyproline
73rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sorbitan, monododecanoate, poly(oxy-1,2-ethanediyl) derivs.
74th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Dismutase, superoxide
75th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Glycine Soja Protein is a protein obtained from the Soybean, Glycine soja, Leguminosae
76th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium benzoate
77th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Octapeptide-3 is the reaction product of acetic acid and Octapeptide-3
78th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Oligopeptide-34 is a synthetic peptide containing 13 amino acids consisting of arginine, aspartic acid, isoleucine, glutamine, leucine, serine, threonine, and tryptophan
79th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Palmitoyl Tripeptide-29 is the product obtained by the reaction of palmitic acid and Tripeptide-29
80th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Nonapeptide-7 is a synthetic peptide consisting of alanine, arginine, cysteine, leucine, phenylalanine, proline, serine and threonine
81st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Nicotinoyl Tripeptide-35 is the product obtained by the reaction of Niacin and Tripeptide-35.
82nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hexapeptide-12 is a synthetic peptide containing Alanine, Glycine, Proline and Valine residues
83rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tripeptide-3 is a synthetic peptide containing glycine, serine and valine residues
84th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polymer derived from alanine, histidine and lysine, copper derivative, hydrochloride
85th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Dipeptide-4 is a synthetic peptide consisting of cysteine and glycine; Cysteine, synthetic dipeptide with glycine
86th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Oligopeptide-6 is a synthetic peptide consisting of alanine, arginine, asparagine, aspartic acid, isoleucine, leucine, lysine, phenylalanine and threonine
87th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Dipeptide-2 is the dipeptide composed of valine and tryptophan
88th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Tetrapeptide-3 is product obtained by the acetylation of Tetrapeptide-3
89th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Tripeptide-1 is product obtained by the acetylation of Tripeptide-1
90th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Tetrapeptide-5 is product obtained by the acetylation of Tetrapeptide-5
91st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Tetrapeptide-2 is product obtained by the acetylation of Tetrapeptide-2
92nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hexapeptide-2 is a synthetic peptide containing Alanine, histidine, lysine, phenylalanine and tryptophane hexapeptide
93rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tripeptide-2 is a synthetic peptide containing tryrosine and valine residues
94th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tyrosine and arginine dipeptide
95th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Pentapeptide-3 is a synthetic peptide containing alanine, arginine, isoleucine, glycine and proline
96th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
L-Ascorbic acid, 2-(dihydrogen phosphate), trisodium salt
97th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium salt of the sulfuric acid ester of Dextran
98th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Palmitoyl Dipeptide-7 is the reaction product of palmitic acid and Dipeptide-7
99th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
100th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Glycine, N-(1-oxohexadecyl)-L-valylglycyl-L-valyl-L-alanyl-L-prolyl-
101st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Palmitoyl Tripeptide-5 is the reaction product of palmitic acid and Tripeptide-5
102nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Folic acid
103rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
sh-Oligopeptide-1 is a single chain recombinant human peptide, produced by fermentation in E. coli. The starting gene is synthesized to be identical to the human gene which codes for Epidermal Growth Factor. It contains a maximum of 53 amino acids which may contain disulfide bonds and/or sugar. The protein consists of the proper sequence of the standard amino acids
104th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Decapeptide-3 is the product formed by the reaction of acetic acid and Decapeptide-3
105th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Oligopeptide-24 is the synthetic peptide containing 13 amino acids consisting of arginine, aspartic acid, cysteine, isoleucine, glutamic acid, glycine, methionine, and tyrosine
106th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Decapeptide-4 is a synthetic peptide consisting of arginine, aspartic acid, cysteine, glutamic acid, leucine, methionine and tyrosine
107th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
sh-Polypeptide-1 is a single chain synthetic human peptide, produced by fermentation in E. coli. The starting gene is a synthesized copy of the human gene which codes for Basic Fibroblast Growth Factor used as such or adapted to the production host. It contains a maximum of 288 amino acids which may contain disulfide bonds and/or glycosylation. The protein consists of the proper sequence of the 20 standard amino acids.
108th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
sh-Polypeptide-11 is a single chain recombinant human peptide, produced by fermentation in E. Coli. The starting gene is a synthesized copy of the human gene which codes for Acidic Fibroblast Growth Factor 1 used as such or adapted to the production host. It contains a maximum of 155 amino acids which may contain disulfide bonds and/or glycosylation. The protein consists of the proper sequence of the 20 standard amino acids.
109th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
It is a single chain recombinant human peptide,produced by fermentation in E. coli. The starting gene is a synthesized copy of the human gene which codes for Insulin-Like Growth Factor used as such or adapted to the production host.
110th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
It is a single chain recombinant human peptide, produced by fermentation in E. Coli. The starting gene is a synthesized copy of the human gene which codes for Vascular Endothelial Growth Factor A used as such or adapted to the production host.
Products in the same category that share this formula's distinguishing ingredients.
Numbuzin
Shares 17 key ingredients with Lifting Peptide Serum: Water, Butylene Glycol, Glycerin, Niacinamide, Hyaluronic Acid
Arencia
Shares 15 key ingredients with Lifting Peptide Serum: Water, Butylene Glycol, Glycerin, Niacinamide, Hydrolyzed Hyaluronic Acid
Numbuzin
Shares 15 key ingredients with Lifting Peptide Serum: Water, Niacinamide, Glycerin, Butylene Glycol, Hydrolyzed Hyaluronic Acid
Arencia
Shares 15 key ingredients with Lifting Peptide Serum: Water, Glycerin, Butylene Glycol, Niacinamide, Cetyl Ethylhexanoate
Eqqualberry
Shares 14 key ingredients with Lifting Peptide Serum: Water, Butylene Glycol, Glycerin, Cetyl Ethylhexanoate, Niacinamide
Arencia
Shares 14 key ingredients with Lifting Peptide Serum: Water, Glycerin, Niacinamide, Hydrolyzed Hyaluronic Acid, Hyaluronic Acid
WATER, GLYCERIN, DIPROPYLENE GLYCOL, POLYMETHYLSILSESQUIOXANE, NIACINAMIDE, METHYL TRIMETHICONE, CETYL ETHYLHEXANOATE, BIFIDA FERMENT LYSATE, POLYGLYCERYL-10 STEARATE, POLYGLYCERYL-3 METHYLGLUCOSE DISTEARATE, 1,2-HEXANEDIOL, HYDROGENATED POLY(C6-14 OLEFIN), PENTAERYTHRITYL DISTEARATE, Butyrospermum Parkii, SOLUBLE COLLAGEN, BUTYLENE GLYCOL, HYDROXYACETOPHENONE, AMMONIUM ACRYLOYLDIMETHYLTAURATE/VP COPOLYMER, SODIUM STEAROYL GLUTAMATE, CAMELLIA SINENSIS LEAF WATER, ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER, ECLIPTA PROSTRATA LEAF EXTRACT, LAMINARIA JAPONICA EXTRACT, TROMETHAMINE, XANTHAN GUM, PARFUM, HYDROGENATED LECITHIN, GLYCERYL POLYMETHACRYLATE, ADENOSINE, FRUCTOOLIGOSACCHARIDES, CENTELLA ASIATICA EXTRACT, FICUS CARICA FRUIT EXTRACT, DISODIUM EDTA, MELIA AZADIRACHTA LEAF EXTRACT, CARBOMER, BETA-GLUCAN, MELIA AZADIRACHTA FLOWER EXTRACT, CURCUMA LONGA ROOT EXTRACT, HYDROLYZED HYALURONIC ACID, CERAMIDE NP, HYDROLYZED ELASTIN, OCIMUM SANCTUM LEAF EXTRACT, ACETIC ACID, HYALURONIC ACID, ELASTIN, LACTIC ACID, ASCORBIC ACID POLYPEPTIDE, CYANOCOBALAMIN, CORALLINA OFFICINALIS EXTRACT, CAPRYLYL GLYCOL, PALMITOYL PENTAPEPTIDE-4, ALCOHOL, PEG-40 HYDROGENATED CASTOR OIL, HYDROLYZED LUPINE PROTEIN, PPG-26-BUTETH-26, POTASSIUM SORBATE, HYDROLYZED WHEAT PROTEIN, POLYGLYCERYL-10 LAURATE, ACETYL HEXAPEPTIDE-8, HYDROLYZED RICE PROTEIN, COPPER TRIPEPTIDE-1, TRIPEPTIDE-1, HYDROLYZED CORN PROTEIN, HYDROLYZED SOY PROTEIN, HEXAPEPTIDE-9, PALMITOYL TETRAPEPTIDE-7, PALMITOYL TRIPEPTIDE-1, NONAPEPTIDE-1, LECITHIN, ACETYL TETRAPEPTIDE-11, PHENOXYETHANOL, TRIPEPTIDE-29, POLYSORBATE 20, SUPEROXIDE DISMUTASE, GLYCINE SOJA PROTEIN, SODIUM BENZOATE, ACETYL OCTAPEPTIDE-3, OLIGOPEPTIDE-34, PALMITOYL TRIPEPTIDE-29, NONAPEPTIDE-7, NICOTINOYL TRIPEPTIDE-35, HEXAPEPTIDE-12, TRIPEPTIDE-3, ALANINE/HISTIDINE/LYSINE POLYPEPTIDE COPPER HCL, DIPEPTIDE-4, OLIGOPEPTIDE-6, DIPEPTIDE-2, ACETYL TETRAPEPTIDE-3, ACETYL TRIPEPTIDE-1, ACETYL TETRAPEPTIDE-5, ACETYL TETRAPEPTIDE-2, HEXAPEPTIDE-2, TRIPEPTIDE-2, DIPEPTIDE-1, PENTAPEPTIDE-3, SODIUM ASCORBYL PHOSPHATE, SODIUM DEXTRAN SULFATE, PALMITOYL DIPEPTIDE-7, DIPEPTIDE DIAMINOBUTYROYL BENZYLAMIDE DIACETATE, PALMITOYL HEXAPEPTIDE-12, PALMITOYL TRIPEPTIDE-5, FOLIC ACID, SH-OLIGOPEPTIDE-1, ACETYL DECAPEPTIDE-3, OLIGOPEPTIDE-24, DECAPEPTIDE-4, SH-POLYPEPTIDE-1, SH-POLYPEPTIDE-11, SH-OLIGOPEPTIDE-2, SH-POLYPEPTIDE-9.
NIACINAMIDE, HYDROLYZED HYALURONIC ACID, CERAMIDE NP, HYALURONIC ACID, LACTIC ACID, PALMITOYL PENTAPEPTIDE-4, ACETYL HEXAPEPTIDE-8, COPPER TRIPEPTIDE-1, TRIPEPTIDE-1, PALMITOYL TETRAPEPTIDE-7, PALMITOYL TRIPEPTIDE-1, TRIPEPTIDE-29, ACETYL OCTAPEPTIDE-3, ACETYL TRIPEPTIDE-1, PENTAPEPTIDE-3, SODIUM ASCORBYL PHOSPHATE, PALMITOYL DIPEPTIDE-7, DIPEPTIDE DIAMINOBUTYROYL BENZYLAMIDE DIACETATE, SH-OLIGOPEPTIDE-1, SH-POLYPEPTIDE-1, SH-POLYPEPTIDE-11, SH-OLIGOPEPTIDE-2, SH-POLYPEPTIDE-9.
After cleansing and toning, apply 1–2 pumps evenly to the face. Gently pat until fully absorbed, then follow with moisturizer. Use morning and evening.
Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry), Combination (oily), Oily skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
7 ingredients could feed malassezia: Bifida Ferment Lysate, Polyglyceryl-10 Stearate, Polyglyceryl-3 Methylglucose Distearate, Pentaerythrityl Distearate, Butyrospermum Parkii, Polyglyceryl-10 Laurate, Polysorbate 20. That describes the yeast's food supply, not a prediction that they will cause a breakout.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
No — it contains Parfum.
Yes — it contains Alcohol.
No — it contains Polymethylsilsesquioxane, Methyl Trimethicone.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Azelaic acid, Copper peptides, Bakuchiol, Niacinamide, Hyaluronic acid, Ceramides. Take more care combining it with Retinoids (retinol, retinal), Benzoyl peroxide, Vitamin C (L-ascorbic acid), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone) — use them in separate routines or on alternate days.
Use it morning and evening, after toner, before moisturiser.
It lists 110 ingredients, of which 23 are recorded as actives.
Centellian24.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect