1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
Numbuzin
No.9 NAD+ BIO Lifting-sil Full Face Mask
face sheet mask
Numbuzin
face sheet mask
Added Last edited
Fit by skin type
General, ingredient-based — not your personalized match.
See how this fits your skin
Take the skin test and I'll show you how suitable this product is for you.
Take the skin testA firming sheet mask featuring a top and bottom section: the top mask contains NAD+ BIO capsules, while the bottom mask is infused with dissolvable PLA threads, that helps enhance defined jawline and gives radiant, plump skin. The additional lifting band further enhances the lifting effect by tightening and sculpting the face.
No.9 NAD+ BIO Lifting-sil Full Face Mask is a cushioning sheet mask from Numbuzin, a brand based in Korean. The formula is built mainly around firmness signalling, hydration and soothing. The ingredient list runs to 118 ingredients, each broken down in full below.
By its ingredient list the formula reads as moderately cushioned — emollient enough to feel like a cream, without the heaviest occlusives near the top. Hydration is handled by Glycerin, Butylene Glycol and Panthenol, humectants that pull water into the upper layers of skin rather than sealing it there.
Firmness signalling: Very high. Peptides and growth factors that signal for collagen support, and here that comes from Adenosine, Adenosine Triphosphate, Pisum Sativum Peptide and Acetyl Hexapeptide-8.
Hydration: Very high. Ingredients that pull and hold water in the upper layers of skin, and here that comes from Glycerin, Butylene Glycol, Panthenol and Trehalose.
Soothing: High. Ingredients aimed at visible redness and reactivity, and here that comes from Cetyl Ethylhexanoate, Neopentyl Glycol Diheptanoate, Panthenol and Allantoin.
Barrier support: Moderate. Lipids and repair signals that support skin barrier integrity, and here that comes from Niacinamide, Panthenol, Hydrogenated Lecithin and Tripeptide-32.
On richness alone it suits Balanced skin best, and is the least natural fit for Dry, Combination (dry), Combination (oily) and Oily skin. Nothing in the list is flagged as a common irritant, which is a reasonable starting point for reactive skin — though a patch test is still the only way to know.
The formula contributes little or nothing on cell renewal. That is not a fault — most products are not meant to do everything — but if one of those is your priority, this is not the product that will address it.
Reading the full list, the formula is fragrance-free, essential-oil-free, no drying alcohol, paraben-free, silicone-free and microplastic-free. Those claims come from the ingredient list itself, not from the packaging.
It can be used morning and evening. In a routine it goes after serums. Seal in your serums with it; in the morning, sunscreen still goes on top.
This summary is generated from the product's ingredient list. It is not a review, it is not the brand's own marketing claims, and it does not replace advice from a dermatologist.
Drawn purely from the ingredient list
Scored on how rich or light the formula reads from its INCI order.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
Based on the curated benefits documented for this product's ingredients.
Attracts and locks in moisture to keep skin plump and dewy
Boosts collagen and cell turnover to reduce fine lines and wrinkles
Calms redness, irritation, and inflammation for sensitive skin
Fades hyperpigmentation and evens out dark spots over time
Targets breakouts by reducing bacteria and unclogging pores
Regulates sebum production to reduce shine and greasiness
Tightens and refines the look of enlarged pores
None of the ingredients in this formula are associated with these benefits. This is not unusual, as most products are designed to target a limited number of concerns.
The actives, UV filters and benefit-carrying ingredients in this formula, in the order they are listed.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
3rd on the list, which puts it at an estimated 5–20% of the formula.
Hexadecyl 2-ethylhexanoate
4th on the list, which puts it at an estimated 2–10% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
5th on the list, which puts it at an estimated 2–10% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
6th on the list, which puts it at an estimated 2–10% of the formula.
1,2,3-Propanetriol, homopolymer, octadecanoates (1:1) (10 mol glycerol average molar ratio)
9th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3-Methylbutane-1,2-diol
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octadecanoic acid, reaction products with 1,2,3-propanetriol (1:1), neutralized
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,2-Dimethyl-1,3-propanediyl diheptanoate
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
L-Arginine
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
alpha-D-Glucopyranoside, alpha-D-glucopyranosyl
Each axis is scored from the ingredients present and how high up the list they sit.
Ingredients that pull and hold water in the upper layers of skin
Lipids and repair signals that support skin barrier integrity
Ingredients that mop up free radicals from UV and pollution
Ingredients that moderate sebum or absorb shine
Ingredients that act on uneven tone and post-inflammatory marks
Ingredients aimed at visible redness and reactivity
Retinoids, acids and enzymes that speed surface turnover
Peptides and growth factors that signal for collagen support
"Active" here means an ingredient carrying a recorded active type or a recognised UV filter.
Solvents, emollients, texture agents and preservatives — the formula that carries the actives.
Read from the full ingredient list. A brand's own claim may differ.
Collagen
Judged by the same curated rules our routine checker uses. It reads the ingredients, not the label.
Best kept to separate routines — one in the morning, one at night, or on alternate days.
This product is the "Moisturise" step.
Flags to check, not verdicts. None of this is medical advice — if you are pregnant, breastfeeding or treating a skin condition, ask a doctor.
Most ingredients do more than one job, so these counts add up to more than the 118 ingredients on the label.
Amino-acid chains that signal for repair or firmness
Changes how skin behaves rather than how it feels
Forms a film that slows water loss
Sets the thickness, spread and stability of the formula
Draws water into the upper layers of skin
Neutralises free radicals from UV and pollution
Dissolves and carries everything else
Softens and smooths by filling gaps between skin cells
Lifts oil and dirt, or holds oil and water together
Binds trace metals that would otherwise spoil the formula
Calms visible redness and irritation
Loosens or dissolves dead surface cells
Sets the acidity the formula needs to work
Botanical material, usually for antioxidants or scent
Every ingredient on the label, in order, with what it does and roughly how much of it is likely to be there.
1st on the list, which puts it at an estimated 30–80% of the formula.
Aqua (EU),Deionized Water,Distilled Water,Micromatrix Fractile AN,Onsen-Sui (JPN),Purified Water
2nd on the list, which puts it at an estimated 5–20% of the formula.
1,1'-Oxydipropan-2-ol; Oxydipropan-2-ol; Hydroxypropyloxypropanol
3rd on the list, which puts it at an estimated 5–20% of the formula.
Hexadecyl 2-ethylhexanoate
4th on the list, which puts it at an estimated 2–10% of the formula.
Glycerine ;Glycerol (INN); Glycerol (RIFM); Glycerolum (EP); Glycyl Alcohol; 1,2,3-Propanetriol; 1,2,3-Trihydroxypropane
5th on the list, which puts it at an estimated 2–10% of the formula.
Niacinamide (vitamin B3) is a gentle skincare active that repairs the skin barrier, calms redness, controls oil and evens tone at 2–5%. Official IUPAC name: **3-Pyridinecarboxamide**
6th on the list, which puts it at an estimated 2–10% of the formula.
1,2,3-Propanetriol, homopolymer, octadecanoates (1:1) (10 mol glycerol average molar ratio)
7th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
8th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
C6-14-alkenes, homopolymers, hydrogenated
9th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3-Methylbutane-1,2-diol
10th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octadecanoic acid, reaction products with 1,2,3-propanetriol (1:1), neutralized
11th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butane-1,3-diol (CAS No. 107-88-0/ EC No. 203-529-7) (R)-(-)-butane-1,3-diol” (CAS No. 6290-03-5/ EC No. 228-532-0)
12th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,2-Dimethyl-1,3-propanediyl diheptanoate
13th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Propenoic acid, polymer with 2,2-bis(hydroxymethyl)propane-1,3-diol 2-propenyl ether
14th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
L-Arginine
15th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Butanamide, 2,4-dihydroxy-N-(3-hydroxypropyl)-3,3-dimethyl-, (2R)-; dl-Panthenol
16th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
alpha-D-Glucopyranoside, alpha-D-glucopyranosyl
17th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Propanediol, 3-(2-ethylhexyloxy)
18th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Xanthan gum
19th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
6-Amino-9-beta-D-ribofuranosyl-9H-purine
20th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Propenoic acid, homopolymer, sodium salt
21st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Disodium dihydrogen ethylenediaminetetraacetate
22nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,3-dihydroxypropane
23rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polymer of lactic acid
24th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2,3-Propanetriol, homopolymer, dodecanoates (1:1) (10 mol glycerol average molar ratio)
25th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Saccharomyces/Silicon Ferment is the product obtained by the fermentation of Saccharomyces in the presence of silicon
26th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Saccharomyces/Copper Ferment is an extract of the product obtained by the fermentation of Saccharomyces in the presence of copper ions
27th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Saccharomyces/Magnesium Ferment is the product obtained by the fermentation of Saccharomyces in the presence of magnesium ions
28th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Saccharomyces/Iron Ferment is the product obtained by the fermentation of Saccharomyces in the presence of iron ions
29th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Saccharomyces/Zinc Ferment is the product obtained by the fermentation product of Saccharomyces in the presence of zinc ions
30th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2,3-Propanetriol, homopolymer, dodecanoates (1:1) (6 mol glycerol average molar ratio)
31st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Decanoic acid, ester with 1,2,3-propanetriol octanoate; Glycerides, mixed decanoyl and octanoyl
32nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Lecithins, hydrogenated
33rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,2-Dithiolane-3-pentanoic acid, (+/-)-
34th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Collagens, hydrolyzates. Substance obtained by acidic, alkaline, or enzymatic hydrolysis of hoofs and horns composed primarily of amino acids, peptides, and proteins. It may contain impurities consisting chiefly of carbohydrates and lipids along with smaller quantities of miscellaneous organic substances of biological origin.
35th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Adenosine 5'-triphosphate.
36th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Adenosine 5'-(trihydrogen diphosphate), 5'->5'-ester with 3-(aminocarbonyl)-1-beta-D-ribofuranosylpyridinium hydroxide, inner salt
37th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
1,3-Benzenediol, 5-[(1E)-2-(4-Hydroxyphenyl)ethenyl]-
38th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Methyl-D-glucopyranoside, ethers with 1,2,3-propanetriol homopolymer, octadecanoates (1:1:2) (3 mol glycerol average molar ratio)
39th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Pullulan is a polysaccharide produced from starch by cultivating the yeast, Aureobasidium pullulans
40th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,5-Cyclohexadiene-1,4-dione, 2-(3,7,11,15,19,23,27,31,35,39-decamethyl-2,6,10,14,18,22,26,30,34,38-tetracontadecaenyl)-5,6-dimethoxy-3-methyl-, (all-E)-
41st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sodium N-methyl-N-(1-oxohexadecyl)aminoacetate
42nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
3,3'-Dihydroxy-beta,beta-carotene-4,4'-dione
43rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Pisum SativumPeptide is the di-/tri- peptide fraction isolated from Pisum Sativum (Pea) Protein by ultra-membrane filtration the Pea, Pisum sativum L., Fabaceae
44th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl hexapeptide-8 is the synthetic peptide consisting of arginine, methionine, and acetylated glutamic acid residues
45th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Lysine, synthetic pentapeptide with serine, and threonine, hexadecanoyl derivatives
46th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
L-Lysine, N-(1-oxohexadecyl)glycyl-L-histidyl-
47th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Copper Tripeptide-1 is a copper complex of Tripeptide-1
48th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hexapeptide-9 is a synthetic peptide containing Glutamine, Glycine and Proline residues
49th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Nonapeptide-1 is a synthetic nonapeptide derived from arginine, lysine, methionine, phenylalanine, proline, tryptophan and valine
50th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tripeptide-1 is a synthetic peptide containing glycine, histidine, and lysine
51st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Tetrapeptide-5 is product obtained by the acetylation of Tetrapeptide-5
52nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Tetrapeptide-9 is a reaction product of acetic acid and Tetrapeptide-9
53rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Tetrapeptide-2 is product obtained by the acetylation of Tetrapeptide-2
54th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Octapeptide-3 is the reaction product of acetic acid and Octapeptide-3
55th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Hexapeptide-1 is reaction product of Alanine, arginine, histidine, leucine, phenylalanine and tryptophane hexapeptide with acetic acid
56th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl s-Cow Pentapeptide-1 SP is the product obtained by the acetylation of s-Cow Pentapeptide-1 SP.
57th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Polymer derived from alanine, histidine and lysine, copper derivative, hydrochloride
58th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tyrosine acetate and arginine, hexadecyl ester, dipeptide
59th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Biotinoyl Tripeptide-1 is the reaction product of Biotin and Tripeptide-1
60th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Dipeptide-4 is a synthetic peptide consisting of cysteine and glycine; Cysteine, synthetic dipeptide with glycine
61st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hexapeptide-11 is a synthetic peptide containing Alanine, Phenylalanine, Proline and Valine residues
62nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hexapeptide-12 is a synthetic peptide containing Alanine, Glycine, Proline and Valine residues
63rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Myristoyl Pentapeptide-17 is the product of the reaction of myristic acid and Pentapeptide-17.
64th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Myristoyl Hexapeptide-16 is the product of the reaction of myristic acid and Hexapeptide-16
65th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Myristoyl Pentapeptide-3 is the reaction product of Myristic Acid with a synthetic peptide containing Threonine, Serine and lysine
66th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Nicotinoyl Tripeptide-1 is the product obtained by the reaction of Niacin with Tripeptide-1
67th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Nonapeptide-7 is a synthetic peptide consisting of alanine, arginine, cysteine, leucine, phenylalanine, proline, serine and threonine
68th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Nicotinoyl Tripeptide-35 is the product obtained by the reaction of Niacin and Tripeptide-35.
69th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Nicotinoyl Dipeptide-26 is the product obtained by the reaction of Niacin and Dipeptide-26.
70th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Nicotinoyl Dipeptide-23 is the product obtained by the reaction of Niacin and Dipeptide-23.
71st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octapeptide-2 is a synthetic peptide composed of glutamic acid, glutamine, leucine, lysine, and threonine
72nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Palmitoyl Tripeptide-5 is the reaction product of palmitic acid and Tripeptide-5
73rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Glycine, N-(1-oxohexadecyl)-L-valylglycyl-L-valyl-L-alanyl-L-prolyl-
74th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Pentapeptide-13 is a synthetic peptide consisting of alanine, arginine, lysine, proline and valine
75th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Palmitoyl Tetrapeptide-10 is the product obtained by the reaction of palmitic acid and Tetrapeptide-10
76th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Palmitoyl Tripeptide-38 is the reaction product of palmitic acid and Tripeptide-38
77th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Palmitoyl Tripeptide-29 is the product obtained by the reaction of palmitic acid and Tripeptide-29
78th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Palmitoyl Tripeptide-8 is the product obtained by the reaction of palmitic acid and Tripeptide-8
79th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tetrapeptide-44 is the synthetic peptide consisting of alanine, glycine, phenylalanine and proline.
80th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tetrapeptide-30 is the synthetic peptide consisting of glutamic acid, lysine and proline
81st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tripeptide-10 Citrulline is the reaction product of Citrulline and Tripeptide-10; Aspartic acid, synthetic tripeptide with isoleucine and lysine, reaction product with 5-ureido-2-aminopentanoic acid
82nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tripeptide-32 is the synthetic peptide consisting of proline, serine and threonine
83rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tripeptide-29 is the synthetic peptide consisting of glycine, proline and hydroxyproline
84th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Octane-1,2-diol
85th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
86th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
L-Arginine, polymer with L-lysine
87th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Dextran
88th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hydrolyzed Elastin is the hydrolysate of elastin derived by acid, enzyme or other method of hydrolysis
89th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Naturally occurring substances, soluble collagen
90th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Acetyl Tetrapeptide-3 is product obtained by the acetylation of Tetrapeptide-3
91st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Trifolium Pratense Flower Extract is an extract of the flowers of the Red Clover, Trifolium pratense L., Fabaceae
92nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Glucose
93rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
D-mannose
94th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
SH-Octapeptide-4 is a recombinant human peptide produced synthetically to be identical to the protein, Enkephalin. It contains 8 amino acids consisting of glycine, histidine, leucine, lysine, phenylalanine, and tyrosine
95th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
sh-Decapeptide-7 is a single chain recombinant human peptide, produced synthetically to be identical to the protein, Enkephalin. It contains 10 amino acids consisting of glycine, leucine, lysine, phenylalanine, serine, threonine and tyrosine
96th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Collagens. A fibrous protein comprising one third of the total protein in mammalian organisms. It is a polypeptide containing three peptide chains and rich in proline and hydroxyproline
97th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Elastins. An insoluble protein extracted from mammalian organisms
98th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Glycine, N-(N-L-.gamma.-glutamyl-L-cysteinyl)-
99th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Palmitoyl Tetrapeptide-7 is the reaction product of palmitic acid and Tetrapeptide-7
100th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Oligopeptide-29 is a synthetic peptide containing 12 amino acids consisting of alanine, arginine, histidine, leucine, lysine, proline and serine
101st on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Oligopeptide-32 is the synthetic peptide containing 12 amino acids consisting of alanine, arginine, hisitidine, leucine, lysine, propline, serine, and tryptophan
102nd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Tetrapeptide-39 Hexapeptide-40 Nonapeptide-20 sr-Spider Polypeptide-3 Decapeptide-30 is a single chain recombinant fusion peptide, produced by fermentation in Lactobacillus The starting gene is synthesized by the fusion of the gene from sr-Spider Polypeptide-3, Tetrapeptide-39, Hexapeptide-40, Nonapeptide-20, and Decapeptide-30. The fusion peptide contains 134 amino acids which may contain disulfide bonds and/or glycosylation, and consists of the proper sequence of the 20 standard amino acids
103rd on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
sh-Polypeptide-22 is a single chain recombinant human peptide, produced by fermentation in E. coli. The starting gene is synthesized to be identical to the human gene which codes for Transforming Growth Factor Beta 1. It contains a maximum of 390 amino acids which may contain disulfide bonds and/or glycosylation. The protein consists of the proper sequence of the 20 standard amino acids
104th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
sh-Oligopeptide-1 is a single chain recombinant human peptide, produced by fermentation in E. coli. The starting gene is synthesized to be identical to the human gene which codes for Epidermal Growth Factor. It contains a maximum of 53 amino acids which may contain disulfide bonds and/or sugar. The protein consists of the proper sequence of the standard amino acids
105th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
sh-Polypeptide-1 is a single chain synthetic human peptide, produced by fermentation in E. coli. The starting gene is a synthesized copy of the human gene which codes for Basic Fibroblast Growth Factor used as such or adapted to the production host. It contains a maximum of 288 amino acids which may contain disulfide bonds and/or glycosylation. The protein consists of the proper sequence of the 20 standard amino acids.
106th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
It is a single chain recombinant human peptide, produced by fermentation in E. Coli. The starting gene is a synthesized copy of the human gene which codes for Vascular Endothelial Growth Factor A used as such or adapted to the production host.
107th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
It is a single chain recombinant human peptide,produced by fermentation in E. coli. The starting gene is a synthesized copy of the human gene which codes for Insulin-Like Growth Factor used as such or adapted to the production host.
108th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
sh-Polypeptide-11 is a single chain recombinant human peptide, produced by fermentation in E. Coli. The starting gene is a synthesized copy of the human gene which codes for Acidic Fibroblast Growth Factor 1 used as such or adapted to the production host. It contains a maximum of 155 amino acids which may contain disulfide bonds and/or glycosylation. The protein consists of the proper sequence of the 20 standard amino acids.
109th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
It is a single chain recombinant human peptide, produced by fermentation in E. Coli. The starting gene is a synthesized copy of the human gene which codes for Keratinocyte Growth Factor used as such or adapted to the production host.
110th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
PGF,PLGF
111th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Hepatocyte Growth Factor
112th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2-Methyl-1,3-propanediol
113th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Sorbitan stearate
114th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Urea, (2,5-dioxo-4-imidazolidinyl)-
115th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
.alpha.-d-Glucopyranosiduronic acid, (3.beta.,20.beta.)-20-carboxy-11-oxo-30-norolean-12-en-3-yl 2-O-.beta.-d-glucopyranuronosyl-, dipotassium salt
116th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Ammonium Acryloyldimethyltaurate/VP Copolymer is a copolymer of ammonium acryloyldimethyltaurate and vinylpyrrolidone monomers
117th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
Glyceryl Acrylate/Acrylic Acid Copolymer is a copolymer of glyceryl acrylate and acrylic acid
118th on the list, below the 1% line — present at under 1%, which for most ingredients is the level they work at.
2,5-Furandione, polymer with methoxyethene; copolymer of methyl vinyl ether and maleic anhydride
Products in the same category that share this formula's distinguishing ingredients.
Abib
Shares 14 key ingredients with No.9 NAD+ BIO Lifting-sil Full Face Mask: Water, Glycerin, Butylene Glycol, Niacinamide, Isopentyldiol
Abib
Shares 14 key ingredients with No.9 NAD+ BIO Lifting-sil Full Face Mask: Water, Glycerin, Butylene Glycol, Niacinamide, Isopentyldiol
Abib
Shares 14 key ingredients with No.9 NAD+ BIO Lifting-sil Full Face Mask: Water, Glycerin, Butylene Glycol, Niacinamide, Isopentyldiol
Abib
Shares 14 key ingredients with No.9 NAD+ BIO Lifting-sil Full Face Mask: Water, Glycerin, Butylene Glycol, Niacinamide, Isopentyldiol
Abib
Shares 14 key ingredients with No.9 NAD+ BIO Lifting-sil Full Face Mask: Water, Glycerin, Butylene Glycol, Niacinamide, Isopentyldiol
SKIN1004
Shares 12 key ingredients with No.9 NAD+ BIO Lifting-sil Full Face Mask: Water, Niacinamide, Cetyl Ethylhexanoate, Butylene Glycol, Glycerin
WATER, DIPROPYLENE GLYCOL, CETYL ETHYLHEXANOATE, GLYCERIN, NIACINAMIDE, POLYGLYCERYL-10 STEARATE, 1,2-HEXANEDIOL, HYDROGENATED POLY(C6-14 OLEFIN), ISOPENTYLDIOL, GLYCERYL STEARATE SE, BUTYLENE GLYCOL, NEOPENTYL GLYCOL DIHEPTANOATE, CARBOMER, ARGININE, PANTHENOL, TREHALOSE, ETHYLHEXYLGLYCERIN, XANTHAN GUM, ADENOSINE, SODIUM POLYACRYLATE, DISODIUM EDTA, PROPANEDIOL, POLYLACTIC ACID, POLYGLYCERYL-10 LAURATE, SACCHAROMYCES/SILICON FERMENT, SACCHAROMYCES/COPPER FERMENT, SACCHAROMYCES/MAGNESIUM FERMENT, SACCHAROMYCES/IRON FERMENT, SACCHAROMYCES/ZINC FERMENT, POLYGLYCERYL-6 LAURATE, CAPRYLIC/CAPRIC TRIGLYCERIDE, HYDROGENATED LECITHIN, THIOCTIC ACID, HYDROLYZED COLLAGEN, ADENOSINE TRIPHOSPHATE, NICOTINAMIDE ADENINE DINUCLEOTIDE, RESVERATROL, POLYGLYCERYL-3 METHYLGLUCOSE DISTEARATE, PULLULAN, UBIQUINONE, SODIUM PALMITOYL SARCOSINATE, ASTAXANTHIN, PISUM SATIVUM PEPTIDE, ACETYL HEXAPEPTIDE-8, PALMITOYL PENTAPEPTIDE-4, PALMITOYL TRIPEPTIDE-1, COPPER TRIPEPTIDE-1, HEXAPEPTIDE-9, NONAPEPTIDE-1, TRIPEPTIDE-1, ACETYL TETRAPEPTIDE-5, ACETYL TETRAPEPTIDE-9, ACETYL TETRAPEPTIDE-2, ACETYL OCTAPEPTIDE-3, ACETYL HEXAPEPTIDE-1, ACETYL S-COW PENTAPEPTIDE-1 SP, ALANINE/HISTIDINE/LYSINE POLYPEPTIDE COPPER HCL, ACETYL DIPEPTIDE-1 CETYL ESTER, BIOTINOYL TRIPEPTIDE-1, DIPEPTIDE-4, HEXAPEPTIDE-11, HEXAPEPTIDE-12, MYRISTOYL PENTAPEPTIDE-17, MYRISTOYL HEXAPEPTIDE-16, MYRISTOYL PENTAPEPTIDE-4, NICOTINOYL TRIPEPTIDE-1, NONAPEPTIDE-7, NICOTINOYL TRIPEPTIDE-35, NICOTINOYL DIPEPTIDE-26, NICOTINOYL DIPEPTIDE-23, OCTAPEPTIDE-2, PALMITOYL TRIPEPTIDE-5, PALMITOYL HEXAPEPTIDE-12, PENTAPEPTIDE-13, PALMITOYL TETRAPEPTIDE-10, PALMITOYL TRIPEPTIDE-38, PALMITOYL TRIPEPTIDE-29, PALMITOYL TRIPEPTIDE-8, TETRAPEPTIDE-44, TETRAPEPTIDE-30, TRIPEPTIDE-10 CITRULLINE, TRIPEPTIDE-32, TRIPEPTIDE-29, CAPRYLYL GLYCOL, DIPEPTIDE DIAMINOBUTYROYL BENZYLAMIDE DIACETATE, ARGININE/LYSINE POLYPEPTIDE, DEXTRAN, HYDROLYZED ELASTIN, SOLUBLE COLLAGEN, ACETYL TETRAPEPTIDE-3, TRIFOLIUM PRATENSE FLOWER EXTRACT, GLUCOSE, MANNOSE, SH-OCTAPEPTIDE-4, SH-DECAPEPTIDE-7, COLLAGEN, ELASTIN, GLUTATHIONE, PALMITOYL TETRAPEPTIDE-7, OLIGOPEPTIDE-29, OLIGOPEPTIDE-32, TETRAPEPTIDE-39 HEXAPEPTIDE-40 NONAPEPTIDE-20 SR-SPIDER POLYPEPTIDE-3 DECAPEPTIDE-30, SH-POLYPEPTIDE-22, SH-OLIGOPEPTIDE-1, SH-POLYPEPTIDE-1, SH-POLYPEPTIDE-9, SH-OLIGOPEPTIDE-2, SH-POLYPEPTIDE-11, SH-POLYPEPTIDE-3, SH-POLYPEPTIDE-16, SH-POLYPEPTIDE-62, METHYLPROPANEDIOL, SORBITAN STEARATE, ALLANTOIN, DIPOTASSIUM GLYCYRRHIZATE, AMMONIUM ACRYLOYLDIMETHYLTAURATE/VP COPOLYMER, GLYCERYL ACRYLATE/ACRYLIC ACID COPOLYMER, PVM/MA COPOLYMER.
NIACINAMIDE, PANTHENOL, PISUM SATIVUM PEPTIDE, ACETYL HEXAPEPTIDE-8, PALMITOYL PENTAPEPTIDE-4, PALMITOYL TRIPEPTIDE-1, COPPER TRIPEPTIDE-1, TRIPEPTIDE-1, ACETYL OCTAPEPTIDE-3, ACETYL S-COW PENTAPEPTIDE-1 SP, BIOTINOYL TRIPEPTIDE-1, HEXAPEPTIDE-11, MYRISTOYL PENTAPEPTIDE-17, MYRISTOYL PENTAPEPTIDE-4, NICOTINOYL TRIPEPTIDE-1, PENTAPEPTIDE-13, PALMITOYL TRIPEPTIDE-8, TRIPEPTIDE-10 CITRULLINE, TRIPEPTIDE-32, TRIPEPTIDE-29, DIPEPTIDE DIAMINOBUTYROYL BENZYLAMIDE DIACETATE, PALMITOYL TETRAPEPTIDE-7, TETRAPEPTIDE-39 HEXAPEPTIDE-40 NONAPEPTIDE-20 SR-SPIDER POLYPEPTIDE-3 DECAPEPTIDE-30, SH-POLYPEPTIDE-22, SH-OLIGOPEPTIDE-1, SH-POLYPEPTIDE-1, SH-POLYPEPTIDE-9, SH-OLIGOPEPTIDE-2, SH-POLYPEPTIDE-11, SH-POLYPEPTIDE-3, SH-POLYPEPTIDE-16, SH-POLYPEPTIDE-62.
1. Start by unfolding the top mask and aligning the eye holes with your eyes. 2. Align the slit in the middle of the bottom mask with your chin, then lift both ends and hook them over your ears. Adjust the intensity of the lower mask by choosing between the two ear slits. 3. Gently smooth the mask down over the chin area 4. For enhanced lifting, position the lifting band under your chin, gently pull up both sides, and secure them by overlapping at the top of your head. 5. Leave the mask on for at least 20 minutes to optimize radiance and lifting effects.
Judged on how rich the formula reads from its ingredient list, it suits Balanced skin best. It is the least natural fit for Dry, Combination (dry), Combination (oily), Oily skin.
No ingredient in this formula carries a common-irritant flag, making it a reasonable option for reactive skin. A patch test is still recommended, as individual skin reactivity varies.
11 ingredients could feed malassezia: Polyglyceryl-10 Stearate, Glyceryl Stearate SE, Polyglyceryl-10 Laurate, Saccharomyces/silicon Ferment, Saccharomyces/copper Ferment, Saccharomyces/magnesium Ferment, Saccharomyces/iron Ferment, Saccharomyces/zinc Ferment. That describes the yeast's food supply, not a prediction that they will cause a breakout.
Nothing in this formula is on the standard pregnancy-caution list. That is not medical clearance — check anything you use daily with your doctor or midwife.
Yes. Reading the full ingredient list, this formula is fragrance-free.
No. Reading the full ingredient list, this formula is no drying alcohol.
Yes. Reading the full ingredient list, this formula is silicone-free.
No. Reading the full ingredient list, this formula is essential-oil-free.
Yes. Reading the full ingredient list, this formula is paraben-free.
It layers well with Vitamin C (L-ascorbic acid), Retinoids (retinol, retinal), AHAs (glycolic, lactic), BHA (salicylic acid), PHAs (gluconolactone), Azelaic acid. Take more care combining it with Benzoyl peroxide — use them in separate routines or on alternate days.
Use it morning and evening, after serums.
It lists 118 ingredients, of which 32 are recorded as actives.
Numbuzin, a brand based in Korean.
We can't find the internet
Attempting to reconnect
Something went wrong!
Attempting to reconnect